[PATCH 3/5] dt-bindings: soc: Add a binding for the Broadcom VCHI services.

[Eric Anholt <eric@anholt.net>]

The VCHI communication channel can be provided by BCM283x and Capri
SoCs, to communicate with the VPU-side OS services.

Signed-off-by: Eric Anholt <eric@anholt.net>
---
 .../devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt

diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt
new file mode 100644
index 000000000000..4055a8977f3e
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt
@@ -0,0 +1,18 @@
+Broadcom VCHIQ firmware services
+
+Required properties:
+
+- compatible:	Should be "brcm,bcm2835-vchiq"
+- reg:		Physical base address and length of the doorbell register pair
+- interrupts:	The interrupt number
+		  See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
+- firmware:	Reference to the RPi firmware device node
+
+Example:
+
+vchi@7e00b840 {
+	compatible = "brcm,bcm2835-vchiq";
+	reg = <0x7e00b840 0xf>;
+	interrupts = <0 2>;
+	firmware = <&firmware>;
+};
-- 
2.16.2