mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Boqun Feng <boqun.feng@gmail.com>
To: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: linux-kernel@vger.kernel.org,
	Josh Triplett <josh@joshtriplett.org>,
	Steven Rostedt <rostedt@goodmis.org>,
	Mathieu Desnoyers <mathieu.desnoyers@efficios.com>,
	Lai Jiangshan <jiangshanlai@gmail.com>
Subject: Re: [PATCH] rcu: exp: Fix "must hold exp_mutex" comments for QS reporting functions
Date: Thu, 8 Mar 2018 16:30:06 +0800	[thread overview]
Message-ID: <20180308083006.wsgvkiw2ejbcwhhu@tardis> (raw)
In-Reply-To: <20180308045429.py66d76trikiuguf@tardis>

[-- Attachment #1: Type: text/plain, Size: 4752 bytes --]

On Thu, Mar 08, 2018 at 12:54:29PM +0800, Boqun Feng wrote:
> On Wed, Mar 07, 2018 at 08:30:17PM -0800, Paul E. McKenney wrote:
> [...]
> > >  
> > > +/*
> > > + * Like sync_rcu_preempt_exp_done(), but this function assumes the caller
> > > + * doesn't hold the rcu_node's ->lock, and will acquire and release the lock
> > > + * itself
> > > + */
> > > +static bool sync_rcu_preempt_exp_done_unlocked(struct rcu_node *rnp)
> > > +{
> > > +	unsigned long flags;
> > > +	bool ret;
> > > +
> > > +	raw_spin_lock_irqsave_rcu_node(rnp, flags);
> > > +	ret = sync_rcu_preempt_exp_done(rnp);
> > 
> > Let's see...  The sync_rcu_preempt_exp_done() function checks the
> > ->exp_tasks pointer and the ->expmask bitmask.  The number of bits in the
> > mask can only decrease, and the ->exp_tasks pointer can only transition
> > from NULL to non-NULL when there is at least one bit set.  However,
> > there is no ordering in sync_rcu_preempt_exp_done(), so it is possible
> > that it could be fooled without the lock:
> > 
> > o	CPU 0 in sync_rcu_preempt_exp_done() reads ->exp_tasks and
> > 	sees that it is NULL.
> > 
> > o	CPU 1 blocks within an RCU read-side critical section, so
> > 	it enqueues the task and points ->exp_tasks at it and
> > 	clears CPU 1's bit in ->expmask.
> > 
> > o	All other CPUs clear their bits in ->expmask.
> > 
> > o	CPU 0 reads ->expmask, sees that it is zero, so incorrectly
> > 	concludes that all quiescent states have completed, despite
> > 	the fact that ->exp_tasks is non-NULL.
> > 
> > So it seems to me that the lock is needed.  Good catch!!!  The problem
> > would occur only if the task running on CPU 0 received a spurious
> > wakeup, but that could potentially happen.
> > 
> 
> Thanks for the analysis ;-)
> 
> > If lock contention becomes a problem, memory-ordering tricks could be
> > applied, but the lock is of course simpler.
> > 
> 
> Agreed.
> 
> > I am guessing that this is a prototype patch, and that you are planning
> 
> Yes, this is a prototype. And I'm preparing a proper patch to send
> later.
> 
> > to add lockdep annotations in more places, but either way please let
> > me know.
> > 
> 
> Give it's a bug as per your analysis, I'd like to defer other lockdep
> annotations and send this first. However, I'm currently getting other
> lockdep splats after applying this, so I need to get that sorted first.
> 

Hmm.. the other lockdep splat seems irrelevant with my patch, I could
observe it on mainline using rcutorture with CONFIG_PROVE_LOCKING=y. I'd
spend some more time on it, in the meanwhile, send a proper patch for
this sync_rcu_preempt_exp_done().

Regards,
Boqun

> Regards,
> Boqun
> 
> > 						Thanx, Paul
> > 
> > > +	raw_spin_unlock_irqrestore_rcu_node(rnp, flags);
> > > +
> > > +	return ret;
> > > +}
> > > +
> > > +
> > >  /*
> > >   * Report the exit from RCU read-side critical section for the last task
> > >   * that queued itself during or before the current expedited preemptible-RCU
> > > @@ -490,6 +512,7 @@ static void synchronize_sched_expedited_wait(struct rcu_state *rsp)
> > >  	struct rcu_node *rnp;
> > >  	struct rcu_node *rnp_root = rcu_get_root(rsp);
> > >  	int ret;
> > > +	unsigned long flags;
> > >  
> > >  	trace_rcu_exp_grace_period(rsp->name, rcu_exp_gp_seq_endval(rsp), TPS("startwait"));
> > >  	jiffies_stall = rcu_jiffies_till_stall_check();
> > > @@ -498,9 +521,9 @@ static void synchronize_sched_expedited_wait(struct rcu_state *rsp)
> > >  	for (;;) {
> > >  		ret = swait_event_timeout(
> > >  				rsp->expedited_wq,
> > > -				sync_rcu_preempt_exp_done(rnp_root),
> > > +				sync_rcu_preempt_exp_done_unlocked(rnp_root),
> > >  				jiffies_stall);
> > > -		if (ret > 0 || sync_rcu_preempt_exp_done(rnp_root))
> > > +		if (ret > 0 || sync_rcu_preempt_exp_done_unlocked(rnp_root))
> > >  			return;
> > >  		WARN_ON(ret < 0);  /* workqueues should not be signaled. */
> > >  		if (rcu_cpu_stall_suppress)
> > > @@ -533,8 +556,14 @@ static void synchronize_sched_expedited_wait(struct rcu_state *rsp)
> > >  			rcu_for_each_node_breadth_first(rsp, rnp) {
> > >  				if (rnp == rnp_root)
> > >  					continue; /* printed unconditionally */
> > > -				if (sync_rcu_preempt_exp_done(rnp))
> > > +
> > > +				raw_spin_lock_irqsave_rcu_node(rnp, flags);
> > > +				if (sync_rcu_preempt_exp_done(rnp)) {
> > > +					raw_spin_unlock_irqrestore_rcu_node(rnp, flags);
> > >  					continue;
> > > +				}
> > > +				raw_spin_unlock_irqrestore_rcu_node(rnp, flags);
> > > +
> > >  				pr_cont(" l=%u:%d-%d:%#lx/%c",
> > >  					rnp->level, rnp->grplo, rnp->grphi,
> > >  					rnp->expmask,
> > > -- 
> > > 2.16.2
> > > 
> > 
> > 



[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

  reply	other threads:[~2018-03-08  8:26 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-07  8:49 Boqun Feng
2018-03-07 15:48 ` Paul E. McKenney
2018-03-08  3:46   ` Boqun Feng
2018-03-08  4:30     ` Paul E. McKenney
2018-03-08  4:54       ` Boqun Feng
2018-03-08  8:30         ` Boqun Feng [this message]
2018-03-08 15:42           ` Paul E. McKenney
2018-03-09  6:57             ` Boqun Feng
2018-03-09 20:17               ` Paul E. McKenney
2018-03-12  5:28                 ` Boqun Feng
2018-03-13  0:15                   ` Paul E. McKenney

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180308083006.wsgvkiw2ejbcwhhu@tardis \
    --to=boqun.feng@gmail.com \
    --cc=jiangshanlai@gmail.com \
    --cc=josh@joshtriplett.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mathieu.desnoyers@efficios.com \
    --cc=paulmck@linux.vnet.ibm.com \
    --cc=rostedt@goodmis.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®