From: Tomas Winkler <tomas.winkler@intel.com>
To: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>,
Jason Gunthorpe <jgg@ziepe.ca>
Cc: Alexander Usyskin <alexander.usyskin@intel.com>,
linux-integrity@vger.kernel.org,
linux-security-module@vger.kernel.org,
linux-kernel@vger.kernel.org,
Tomas Winkler <tomas.winkler@intel.com>
Subject: [PATCH v2 5/8] tpm: factor out tpm1 pm suspend flow into tpm1-cmd.c
Date: Sat, 10 Mar 2018 10:24:25 +0200 [thread overview]
Message-ID: <20180310082428.31519-6-tomas.winkler@intel.com> (raw)
In-Reply-To: <20180310082428.31519-1-tomas.winkler@intel.com>
Factor out tpm1 suspend flow from tpm-interface.c into a new function
tpm1_pm_suspend in tpm1-cmd.c
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
---
drivers/char/tpm/tpm-interface.c | 55 ++++------------------------------------
drivers/char/tpm/tpm.h | 1 +
drivers/char/tpm/tpm1-cmd.c | 54 +++++++++++++++++++++++++++++++++++++++
3 files changed, 60 insertions(+), 50 deletions(-)
diff --git a/drivers/char/tpm/tpm-interface.c b/drivers/char/tpm/tpm-interface.c
index a7dfe286b343..11899ef32457 100644
--- a/drivers/char/tpm/tpm-interface.c
+++ b/drivers/char/tpm/tpm-interface.c
@@ -485,15 +485,6 @@ int tpm_send(struct tpm_chip *chip, void *cmd, size_t buflen)
}
EXPORT_SYMBOL_GPL(tpm_send);
-#define TPM_ORD_SAVESTATE 152
-#define SAVESTATE_RESULT_SIZE 10
-
-static const struct tpm_input_header savestate_header = {
- .tag = cpu_to_be16(TPM_TAG_RQU_COMMAND),
- .length = cpu_to_be32(10),
- .ordinal = cpu_to_be32(TPM_ORD_SAVESTATE)
-};
-
/*
* We are about to suspend. Save the TPM state
* so that it can be restored.
@@ -501,54 +492,18 @@ static const struct tpm_input_header savestate_header = {
int tpm_pm_suspend(struct device *dev)
{
struct tpm_chip *chip = dev_get_drvdata(dev);
- struct tpm_cmd_t cmd;
- int rc, try;
+ int rc = 0;
- u8 dummy_hash[TPM_DIGEST_SIZE] = { 0 };
-
- if (chip == NULL)
+ if (!chip)
return -ENODEV;
if (chip->flags & TPM_CHIP_FLAG_ALWAYS_POWERED)
return 0;
- if (chip->flags & TPM_CHIP_FLAG_TPM2) {
+ if (chip->flags & TPM_CHIP_FLAG_TPM2)
tpm2_shutdown(chip, TPM2_SU_STATE);
- return 0;
- }
-
- /* for buggy tpm, flush pcrs with extend to selected dummy */
- if (tpm_suspend_pcr)
- rc = tpm1_pcr_extend(chip, tpm_suspend_pcr, dummy_hash,
- "extending dummy pcr before suspend");
-
- /* now do the actual savestate */
- for (try = 0; try < TPM_RETRY; try++) {
- cmd.header.in = savestate_header;
- rc = tpm_transmit_cmd(chip, NULL, &cmd, SAVESTATE_RESULT_SIZE,
- 0, 0, NULL);
-
- /*
- * If the TPM indicates that it is too busy to respond to
- * this command then retry before giving up. It can take
- * several seconds for this TPM to be ready.
- *
- * This can happen if the TPM has already been sent the
- * SaveState command before the driver has loaded. TCG 1.2
- * specification states that any communication after SaveState
- * may cause the TPM to invalidate previously saved state.
- */
- if (rc != TPM_WARN_RETRY)
- break;
- tpm_msleep(TPM_TIMEOUT_RETRY);
- }
-
- if (rc)
- dev_err(&chip->dev,
- "Error (%d) sending savestate before suspend\n", rc);
- else if (try > 0)
- dev_warn(&chip->dev, "TPM savestate took %dms\n",
- try * TPM_TIMEOUT_RETRY);
+ else
+ rc = tpm1_pm_suspend(chip, tpm_suspend_pcr);
return rc;
}
diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
index 6922fdfc4274..1bed9b5441c5 100644
--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@@ -529,6 +529,7 @@ ssize_t tpm_transmit_cmd(struct tpm_chip *chip, struct tpm_space *space,
int tpm_startup(struct tpm_chip *chip);
int tpm_get_timeouts(struct tpm_chip *);
+int tpm1_pm_suspend(struct tpm_chip *chip, int tpm_suspend_pcr);
int tpm1_do_selftest(struct tpm_chip *chip);
int tpm1_auto_startup(struct tpm_chip *chip);
int tpm1_get_timeouts(struct tpm_chip *chip);
diff --git a/drivers/char/tpm/tpm1-cmd.c b/drivers/char/tpm/tpm1-cmd.c
index 6dde18c46820..e2c9f609fe64 100644
--- a/drivers/char/tpm/tpm1-cmd.c
+++ b/drivers/char/tpm/tpm1-cmd.c
@@ -665,3 +665,57 @@ int tpm1_auto_startup(struct tpm_chip *chip)
rc = -ENODEV;
return rc;
}
+
+#define TPM_ORD_SAVESTATE 152
+#define SAVESTATE_RESULT_SIZE 10
+static const struct tpm_input_header savestate_header = {
+ .tag = cpu_to_be16(TPM_TAG_RQU_COMMAND),
+ .length = cpu_to_be32(10),
+ .ordinal = cpu_to_be32(TPM_ORD_SAVESTATE)
+};
+
+/*
+ * We are about to suspend. Save the TPM state
+ * so that it can be restored.
+ */
+int tpm1_pm_suspend(struct tpm_chip *chip, int tpm_suspend_pcr)
+{
+ u8 dummy_hash[TPM_DIGEST_SIZE] = { 0 };
+ struct tpm_cmd_t cmd;
+ int rc, try;
+
+ /* for buggy tpm, flush pcrs with extend to selected dummy */
+ if (tpm_suspend_pcr)
+ rc = tpm1_pcr_extend(chip, tpm_suspend_pcr, dummy_hash,
+ "extending dummy pcr before suspend");
+
+ /* now do the actual savestate */
+ for (try = 0; try < TPM_RETRY; try++) {
+ cmd.header.in = savestate_header;
+ rc = tpm_transmit_cmd(chip, NULL, &cmd, SAVESTATE_RESULT_SIZE,
+ 0, 0, NULL);
+
+ /*
+ * If the TPM indicates that it is too busy to respond to
+ * this command then retry before giving up. It can take
+ * several seconds for this TPM to be ready.
+ *
+ * This can happen if the TPM has already been sent the
+ * SaveState command before the driver has loaded. TCG 1.2
+ * specification states that any communication after SaveState
+ * may cause the TPM to invalidate previously saved state.
+ */
+ if (rc != TPM_WARN_RETRY)
+ break;
+ tpm_msleep(TPM_TIMEOUT_RETRY);
+ }
+
+ if (rc)
+ dev_err(&chip->dev,
+ "Error (%d) sending savestate before suspend\n", rc);
+ else if (try > 0)
+ dev_warn(&chip->dev, "TPM savestate took %dms\n",
+ try * TPM_TIMEOUT_RETRY);
+
+ return rc;
+}
--
2.14.3
next prev parent reply other threads:[~2018-03-10 8:28 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-10 8:24 [PATCH v2 0/8] tpm: factor out tpm1 code " Tomas Winkler
2018-03-10 8:24 ` [PATCH v2 1/8] tpm: move tpm1_pcr_extend to tpm1-cmd.c Tomas Winkler
2018-03-15 16:27 ` Jarkko Sakkinen
2018-03-10 8:24 ` [PATCH v2 2/8] tpm: move tpm_getcap " Tomas Winkler
2018-03-15 16:29 ` Jarkko Sakkinen
2018-03-10 8:24 ` [PATCH v2 3/8] tpm: factor out tpm1_get_random into tpm1-cmd.c Tomas Winkler
2018-03-15 16:32 ` Jarkko Sakkinen
2018-03-15 23:24 ` Winkler, Tomas
2018-03-16 14:02 ` Jarkko Sakkinen
2018-03-10 8:24 ` [PATCH v2 4/8] tpm: move tpm1 selftest code from tpm-interface tpm1-cmd.c Tomas Winkler
2018-03-15 16:37 ` Jarkko Sakkinen
2018-03-10 8:24 ` Tomas Winkler [this message]
2018-03-15 16:40 ` [PATCH v2 5/8] tpm: factor out tpm1 pm suspend flow into tpm1-cmd.c Jarkko Sakkinen
2018-03-10 8:24 ` [PATCH v2 6/8] tpm: factor out tpm_startup function Tomas Winkler
2018-03-15 16:41 ` Jarkko Sakkinen
2018-03-10 8:24 ` [PATCH v2 7/8] tpm: Move pcr extend to tpm2-cmd.c Tomas Winkler
2018-03-15 16:47 ` Jarkko Sakkinen
2018-03-15 23:28 ` Winkler, Tomas
2018-03-16 14:08 ` Jarkko Sakkinen
2018-03-10 8:24 ` [PATCH v2 8/8] tpm: move tpm2 code validation to tpm2-space.c Tomas Winkler
2018-03-15 16:49 ` Jarkko Sakkinen
2018-03-15 16:35 ` [PATCH v2 0/8] tpm: factor out tpm1 code into tpm1-cmd.c Jarkko Sakkinen
2018-03-15 23:25 ` Winkler, Tomas
2018-03-16 14:03 ` Jarkko Sakkinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180310082428.31519-6-tomas.winkler@intel.com \
--to=tomas.winkler@intel.com \
--cc=alexander.usyskin@intel.com \
--cc=jarkko.sakkinen@linux.intel.com \
--cc=jgg@ziepe.ca \
--cc=linux-integrity@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-security-module@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®