From: Nick Dyer <nick@shmanahar.org>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-input@vger.kernel.org, Benson Leung <bleung@chromium.org>,
Olof Johansson <olof@lixom.net>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 01/14] Input: atmel_mxt_ts - do not pass suspend mode in platform data
Date: Wed, 14 Mar 2018 20:51:24 +0000 [thread overview]
Message-ID: <20180314205123.GA26353@lava.h.shmanahar.org> (raw)
In-Reply-To: <20180312190907.174301-2-dmitry.torokhov@gmail.com>
Hi Dmitry-
Thanks for sending these patches!
On Mon, Mar 12, 2018 at 12:08:54PM -0700, Dmitry Torokhov wrote:
> The way we are supposed to put controller to sleep and wake it up does not
> depend on the platform, but rather on controller itself. Controllers using
> T9 require manipulating T9 control register, while others, using newer
> T100, should be put to sleep by adjusting T7 power config.
I'm afraid this is actually a misconception. If you look at object table
for the older T9 device, you'll find it has the T7 object and it in fact
works exactly the same way as the T100-based device.
The MXT_SUSPEND_T9_CTRL is in there because on your older Pixel devices
the config saved into NVRAM on the touch controller has a zero byte in
the T9 CTRL setting, meaning the touch controller will never wake up
unless the driver knows to write 0x83 into it.
> We'll keep pdata->suspend_mode for now and remove it when we rework
> chromeos-laptop driver.
>
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> ---
> drivers/input/touchscreen/atmel_mxt_ts.c | 15 ++++++---------
> 1 file changed, 6 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
> index 7659bc48f1db8..1aabfae1297ba 100644
> --- a/drivers/input/touchscreen/atmel_mxt_ts.c
> +++ b/drivers/input/touchscreen/atmel_mxt_ts.c
> @@ -2868,8 +2868,8 @@ static const struct attribute_group mxt_attr_group = {
>
> static void mxt_start(struct mxt_data *data)
> {
> - switch (data->pdata->suspend_mode) {
> - case MXT_SUSPEND_T9_CTRL:
> + switch (data->multitouch) {
> + case MXT_TOUCH_MULTI_T9:
> mxt_soft_reset(data);
>
> /* Touch enable */
> @@ -2878,7 +2878,7 @@ static void mxt_start(struct mxt_data *data)
> MXT_TOUCH_MULTI_T9, MXT_T9_CTRL, 0x83);
> break;
>
> - case MXT_SUSPEND_DEEP_SLEEP:
> + case MXT_TOUCH_MULTITOUCHSCREEN_T100:
> default:
> mxt_set_t7_power_cfg(data, MXT_POWER_CFG_RUN);
>
> @@ -2886,19 +2886,18 @@ static void mxt_start(struct mxt_data *data)
> mxt_t6_command(data, MXT_COMMAND_CALIBRATE, 1, false);
> break;
> }
> -
> }
>
> static void mxt_stop(struct mxt_data *data)
> {
> - switch (data->pdata->suspend_mode) {
> - case MXT_SUSPEND_T9_CTRL:
> + switch (data->multitouch) {
> + case MXT_TOUCH_MULTI_T9:
> /* Touch disable */
> mxt_write_object(data,
> MXT_TOUCH_MULTI_T9, MXT_T9_CTRL, 0);
> break;
>
> - case MXT_SUSPEND_DEEP_SLEEP:
> + case MXT_TOUCH_MULTITOUCHSCREEN_T100:
> default:
> mxt_set_t7_power_cfg(data, MXT_POWER_CFG_DEEPSLEEP);
> break;
> @@ -2954,8 +2953,6 @@ static const struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client)
> pdata->t19_keymap = keymap;
> }
>
> - pdata->suspend_mode = MXT_SUSPEND_DEEP_SLEEP;
> -
> return pdata;
> }
> #else
> --
> 2.16.2.660.g709887971b-goog
>
next prev parent reply other threads:[~2018-03-14 20:58 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-12 19:08 [PATCH 00/14] chrome_laptop: stop being a platform driver Dmitry Torokhov
2018-03-12 19:08 ` [PATCH 01/14] Input: atmel_mxt_ts - do not pass suspend mode in platform data Dmitry Torokhov
2018-03-14 20:51 ` Nick Dyer [this message]
2018-03-15 23:56 ` Dmitry Torokhov
2018-03-16 20:40 ` Nick Dyer
2018-03-17 17:42 ` Dmitry Torokhov
2018-03-17 20:42 ` Nick Dyer
2018-03-12 19:08 ` [PATCH 02/14] Input: atmel_mxt_ts - switch from OF to generic device properties Dmitry Torokhov
2018-03-14 20:51 ` Nick Dyer
2018-03-12 19:08 ` [PATCH 03/14] Input: atmel_mxt_ts - switch ChromeOS ACPI devices to generic props Dmitry Torokhov
2018-03-14 20:52 ` Nick Dyer
2018-03-12 19:08 ` [PATCH 04/14] platform/chrome: chromeos_laptop - add SPDX identifier Dmitry Torokhov
2018-03-20 1:53 ` Benson Leung
2018-03-12 19:08 ` [PATCH 05/14] platform/chrome: chromeos_laptop - stop setting suspend mode for Atmel devices Dmitry Torokhov
2018-03-12 19:08 ` [PATCH 06/14] platform/chrome: chromeos_laptop - introduce pr_fmt() Dmitry Torokhov
2018-03-20 2:03 ` Benson Leung
2018-03-12 19:09 ` [PATCH 07/14] platform/chrome: chromeos_laptop - factor out getting IRQ from DMI Dmitry Torokhov
2018-03-20 2:14 ` Benson Leung
2018-03-12 19:09 ` [PATCH 08/14] platform/chrome: chromeos_laptop - rework i2c peripherals initialization Dmitry Torokhov
2018-03-12 19:09 ` [PATCH 09/14] platform/chrome: chromeos_laptop - parse DMI IRQ data once Dmitry Torokhov
2018-03-12 19:09 ` [PATCH 10/14] platform/chrome: chromeos_laptop - use I2C notifier to create devices Dmitry Torokhov
2018-03-12 19:09 ` [PATCH 11/14] platform/chrome: chromeos_laptop - rely on I2C to set up interrupt trigger Dmitry Torokhov
2018-03-12 19:09 ` [PATCH 12/14] platform/chrome: chromeos_laptop - use device properties for Pixel Dmitry Torokhov
2018-03-12 19:09 ` [PATCH 13/14] platform/chrome: chromeos_laptop - discard data for unneeded boards Dmitry Torokhov
2018-03-12 19:09 ` [PATCH 14/14] Input: atmel_mxt_ts - remove platform data support Dmitry Torokhov
2018-03-14 20:59 ` Nick Dyer
2018-03-16 0:06 ` Dmitry Torokhov
2018-03-16 20:41 ` Nick Dyer
2018-03-12 19:17 ` [PATCH 00/14] chrome_laptop: stop being a platform driver Benson Leung
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180314205123.GA26353@lava.h.shmanahar.org \
--to=nick@shmanahar.org \
--cc=bleung@chromium.org \
--cc=dmitry.torokhov@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=olof@lixom.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®