From: Daniel Kurtz <djkurtz@chromium.org>
To: Peter Hurley <peter@hurleysoftware.com>, Rob Herring <robh@kernel.org>
Cc: adurbin@chromium.org,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-kernel@vger.kernel.org,
Grant Likely <grant.likely@linaro.org>,
Daniel Kurtz <djkurtz@chromium.org>,
Rob Herring <robh+dt@kernel.org>,
Frank Rowand <frowand.list@gmail.com>,
Jiri Slaby <jslaby@suse.com>, Arnd Bergmann <arnd@arndb.de>,
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
FLATTENED DEVICE TREE),
linux-serial@vger.kernel.org (open list:SERIAL DRIVERS),
linux-arch@vger.kernel.org (open list:GENERIC INCLUDE/ASM HEADER
FILES)
Subject: [PATCH v2] earlycon: Fix __earlycon_table stride... again
Date: Wed, 14 Mar 2018 19:48:16 -0600 [thread overview]
Message-ID: <20180315014817.142930-1-djkurtz@chromium.org> (raw)
Commit 470ca0de69fe ("serial: earlycon: Enable earlycon without command
line param") added EARLYCON_TABLE().
Commit 99492c39f39f ("earlycon: Fix __earlycon_table stride") referenced
commit 07fca0e57fca92 ("tracing: Properly align linker defined symbols")
and tried to fix EARLYCON_TABLE() using __aligned(32).
However, the fix copied just works around compiler behavior. In fact, it
was subsequently re-implemented for tracing using a table of pointers in
commit 3d56e331b653 ("tracing: Replace syscall_meta_data struct array with
pointer array"), commit 654986462939 ("tracepoints: Fix section alignment
using pointer array") and commit e4a9ea5ee7c8 ("tracing: Replace
trace_event struct array with pointer array").
Let's do the same "array of pointers to structs" approach for
EARLYCON_TABLE.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
---
Changes since v1:
* Change __earlycon_table to an array of pointers.
Note: I do not have a convenient system to test the of/fdt.c part of this
patch, so would apreciate help verifying it. Thanks!
drivers/of/fdt.c | 7 +++++--
drivers/tty/serial/earlycon.c | 6 ++++--
include/asm-generic/vmlinux.lds.h | 2 +-
include/linux/serial_core.h | 21 ++++++++++++++-------
4 files changed, 24 insertions(+), 12 deletions(-)
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index 84aa9d676375..6da20b9688f7 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -942,7 +942,7 @@ int __init early_init_dt_scan_chosen_stdout(void)
int offset;
const char *p, *q, *options = NULL;
int l;
- const struct earlycon_id *match;
+ const struct earlycon_id **p_match;
const void *fdt = initial_boot_params;
offset = fdt_path_offset(fdt, "/chosen");
@@ -969,7 +969,10 @@ int __init early_init_dt_scan_chosen_stdout(void)
return 0;
}
- for (match = __earlycon_table; match < __earlycon_table_end; match++) {
+ for (p_match = __earlycon_table; p_match < __earlycon_table_end;
+ p_match++) {
+ const struct earlycon_id *match = *p_match;
+
if (!match->compatible[0])
continue;
diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c
index a24278380fec..22683393a0f2 100644
--- a/drivers/tty/serial/earlycon.c
+++ b/drivers/tty/serial/earlycon.c
@@ -169,7 +169,7 @@ static int __init register_earlycon(char *buf, const struct earlycon_id *match)
*/
int __init setup_earlycon(char *buf)
{
- const struct earlycon_id *match;
+ const struct earlycon_id **p_match;
if (!buf || !buf[0])
return -EINVAL;
@@ -177,7 +177,9 @@ int __init setup_earlycon(char *buf)
if (early_con.flags & CON_ENABLED)
return -EALREADY;
- for (match = __earlycon_table; match < __earlycon_table_end; match++) {
+ for (p_match = __earlycon_table; p_match < __earlycon_table_end;
+ p_match++) {
+ const struct earlycon_id *match = *p_match;
size_t len = strlen(match->name);
if (strncmp(buf, match->name, len))
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index 1ab0e520d6fc..e17de55c2542 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -179,7 +179,7 @@
#endif
#ifdef CONFIG_SERIAL_EARLYCON
-#define EARLYCON_TABLE() STRUCT_ALIGN(); \
+#define EARLYCON_TABLE() . = ALIGN(8); \
VMLINUX_SYMBOL(__earlycon_table) = .; \
KEEP(*(__earlycon_table)) \
VMLINUX_SYMBOL(__earlycon_table_end) = .;
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index b32df49a3bd5..93b7add47087 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -351,10 +351,10 @@ struct earlycon_id {
char name[16];
char compatible[128];
int (*setup)(struct earlycon_device *, const char *options);
-} __aligned(32);
+};
-extern const struct earlycon_id __earlycon_table[];
-extern const struct earlycon_id __earlycon_table_end[];
+extern const struct earlycon_id *__earlycon_table[];
+extern const struct earlycon_id *__earlycon_table_end[];
#if defined(CONFIG_SERIAL_EARLYCON) && !defined(MODULE)
#define EARLYCON_USED_OR_UNUSED __used
@@ -362,12 +362,19 @@ extern const struct earlycon_id __earlycon_table_end[];
#define EARLYCON_USED_OR_UNUSED __maybe_unused
#endif
-#define OF_EARLYCON_DECLARE(_name, compat, fn) \
- static const struct earlycon_id __UNIQUE_ID(__earlycon_##_name) \
- EARLYCON_USED_OR_UNUSED __section(__earlycon_table) \
+#define _OF_EARLYCON_DECLARE(_name, compat, fn, unique_id) \
+ static const struct earlycon_id unique_id \
+ EARLYCON_USED_OR_UNUSED __initdata \
= { .name = __stringify(_name), \
.compatible = compat, \
- .setup = fn }
+ .setup = fn }; \
+ static const struct earlycon_id EARLYCON_USED_OR_UNUSED \
+ __section(__earlycon_table) \
+ * const __PASTE(__p, unique_id) = &unique_id
+
+#define OF_EARLYCON_DECLARE(_name, compat, fn) \
+ _OF_EARLYCON_DECLARE(_name, compat, fn, \
+ __UNIQUE_ID(__earlycon_##_name))
#define EARLYCON_DECLARE(_name, fn) OF_EARLYCON_DECLARE(_name, "", fn)
--
2.16.2.804.g6dcf76e118-goog
next reply other threads:[~2018-03-15 1:48 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-15 1:48 Daniel Kurtz [this message]
2018-03-15 1:57 ` Daniel Kurtz
2018-03-15 2:33 ` Randy Dunlap
2018-03-15 16:15 ` Daniel Kurtz
2018-03-17 11:31 ` kbuild test robot
2018-03-17 11:52 ` kbuild test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180315014817.142930-1-djkurtz@chromium.org \
--to=djkurtz@chromium.org \
--cc=adurbin@chromium.org \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=frowand.list@gmail.com \
--cc=grant.likely@linaro.org \
--cc=gregkh@linuxfoundation.org \
--cc=jslaby@suse.com \
--cc=linux-arch@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=peter@hurleysoftware.com \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®