From: Jagan Teki <jagan@amarulasolutions.com>
To: Shawn Guo <shawnguo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Sascha Hauer <kernel@pengutronix.de>,
Fabio Estevam <fabio.estevam@nxp.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Fabio maggi <fabio.mauri@bticino.it>,
lamiaposta71@gmail.com,
Andrea CORTESE <andrea.cortese@bticino.it>,
"davide . bonfanti" <davide.bonfanti@bticino.it>,
Shyam Saini <shyam.saini@amarulasolutions.com>,
Michael Trimarchi <michael@amarulasolutions.com>,
Jagan Teki <jagan@amarulasolutions.com>,
Simone CIANNI <simone.cianni@bticino.it>,
Raffaele RECALCATI <raffaele.recalcati@bticino.it>
Subject: [PATCH 3/3] ARM: dts: imx6dl-mamoj: Add PFUZE100 support
Date: Thu, 15 Mar 2018 22:37:10 +0530 [thread overview]
Message-ID: <20180315170710.9551-3-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20180315170710.9551-1-jagan@amarulasolutions.com>
MX6DL Mamoj boards has Freescale PFUZE100 PMIC, so add support for it.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Simone CIANNI <simone.cianni@bticino.it>
Signed-off-by: Raffaele RECALCATI <raffaele.recalcati@bticino.it>
---
arch/arm/boot/dts/imx6dl-mamoj.dts | 113 +++++++++++++++++++++++++++++++++++++
1 file changed, 113 insertions(+)
diff --git a/arch/arm/boot/dts/imx6dl-mamoj.dts b/arch/arm/boot/dts/imx6dl-mamoj.dts
index 53e85c7f06b4..c4a0583c71cc 100644
--- a/arch/arm/boot/dts/imx6dl-mamoj.dts
+++ b/arch/arm/boot/dts/imx6dl-mamoj.dts
@@ -32,6 +32,119 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c4>;
status = "okay";
+
+ pmic: pfuze100@8 {
+ compatible = "fsl,pfuze100";
+ reg = <0x08>;
+
+ regulators {
+ /* CPU vdd_arm core */
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ /* SOC vdd_soc */
+ sw1c_reg: sw1c {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ /* I/O power GEN_3V3 */
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* DDR memory */
+ sw3a_reg: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* DDR memory */
+ sw3b_reg: sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* not used */
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ /* not used */
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ /* PMIC vsnvs. EX boot mode */
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* not used */
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ /* not used */
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ /* not used */
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ /* 1v8 general power */
+ vgen4_reg: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ /* 2v8 general power IMX6 */
+ vgen5_reg: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ /* 3v3 Ethernet */
+ vgen6_reg: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
};
&uart3 {
--
2.14.3
next prev parent reply other threads:[~2018-03-15 17:07 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-15 17:07 [PATCH 1/3] dt-bindings: Add vendor prefix for Bticino Jagan Teki
2018-03-15 17:07 ` [PATCH 2/3] ARM: dts: i.MX6: Add BTicino i.MX6DL Mamoj initial support Jagan Teki
2018-03-15 17:58 ` Fabio Estevam
2018-03-15 17:07 ` Jagan Teki [this message]
2018-03-15 17:59 ` [PATCH 3/3] ARM: dts: imx6dl-mamoj: Add PFUZE100 support Fabio Estevam
2018-03-18 12:52 ` [PATCH 1/3] dt-bindings: Add vendor prefix for Bticino Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180315170710.9551-3-jagan@amarulasolutions.com \
--to=jagan@amarulasolutions.com \
--cc=andrea.cortese@bticino.it \
--cc=davide.bonfanti@bticino.it \
--cc=devicetree@vger.kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=fabio.mauri@bticino.it \
--cc=kernel@pengutronix.de \
--cc=lamiaposta71@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=michael@amarulasolutions.com \
--cc=raffaele.recalcati@bticino.it \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
--cc=shyam.saini@amarulasolutions.com \
--cc=simone.cianni@bticino.it \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®