From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754728AbeCRUew (ORCPT ); Sun, 18 Mar 2018 16:34:52 -0400 Received: from mail.kmu-office.ch ([178.209.48.109]:53997 "EHLO mail.kmu-office.ch" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754618AbeCRUes (ORCPT ); Sun, 18 Mar 2018 16:34:48 -0400 From: Stefan Agner To: shawnguo@kernel.org, kernel@pengutronix.de, arnd@arndb.de Cc: fabio.estevam@nxp.com, linux@armlinux.org.uk, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Stefan Agner Subject: [PATCH 6/7] ARM: multi_v7_defconfig: add NXP FlexCAN IP support Date: Sun, 18 Mar 2018 21:34:41 +0100 Message-Id: <20180318203442.19759-6-stefan@agner.ch> X-Mailer: git-send-email 2.16.2 In-Reply-To: <20180318203442.19759-1-stefan@agner.ch> References: <20180318203442.19759-1-stefan@agner.ch> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Enable FlexCAN support as module by default. FlexCAN can be found on various NXP designs such as the i.MX and Vybrid SoC family. Signed-off-by: Stefan Agner --- arch/arm/configs/multi_v7_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 984e509d41bf..61968bd6cccc 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -174,6 +174,7 @@ CONFIG_CAN_RAW=y CONFIG_CAN_BCM=y CONFIG_CAN_DEV=y CONFIG_CAN_AT91=m +CONFIG_CAN_FLEXCAN=m CONFIG_CAN_RCAR=m CONFIG_CAN_XILINXCAN=y CONFIG_CAN_MCP251X=y -- 2.16.2