From: Steve Twiss <stwiss.opensource@diasemi.com>
To: LINUX-KERNEL <linux-kernel@vger.kernel.org>,
Lee Jones <lee.jones@linaro.org>
Cc: Support Opensource <support.opensource@diasemi.com>
Subject: [PATCH V1] mfd: da9062: use core helper regmap_reg_range macros
Date: Wed, 28 Mar 2018 12:03:09 +0100 [thread overview]
Message-ID: <20180328110612.1FCAD3FACC@swsrvapps-01.diasemi.com> (raw)
From: Steve Twiss <stwiss.opensource@diasemi.com>
Replace multi-line entries in the regmap_range arrays with single
line macros: regmap_reg_range(). This will leave the static structure
array entries for regmap_range unaltered. It will significantly reduce
the line count in the DA9062/61 core file.
Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com>
---
This patch applies against linux-next and v4.16-rc7
Hi,
This is a cosmetic tidy up operation. It reduces the line-count in the
file by over 200.
It will replace regmap_range[] array entries, such as this:
{
.range_min = DA9062AA_DEVICE_ID,
.range_max = DA9062AA_CONFIG_ID,
},
with a single line,
regmap_reg_range(DA9062AA_DEVICE_ID, DA9062AA_CONFIG_ID),
Regards,
Steve Twiss, Dialog Semiconductor
drivers/mfd/da9062-core.c | 462 ++++++++++++----------------------------------
1 file changed, 114 insertions(+), 348 deletions(-)
diff --git a/drivers/mfd/da9062-core.c b/drivers/mfd/da9062-core.c
index fe18115..9f61059 100644
--- a/drivers/mfd/da9062-core.c
+++ b/drivers/mfd/da9062-core.c
@@ -365,186 +365,69 @@ static int da9062_get_device_type(struct da9062 *chip)
}
static const struct regmap_range da9061_aa_readable_ranges[] = {
- {
- .range_min = DA9062AA_PAGE_CON,
- .range_max = DA9062AA_STATUS_B,
- }, {
- .range_min = DA9062AA_STATUS_D,
- .range_max = DA9062AA_EVENT_C,
- }, {
- .range_min = DA9062AA_IRQ_MASK_A,
- .range_max = DA9062AA_IRQ_MASK_C,
- }, {
- .range_min = DA9062AA_CONTROL_A,
- .range_max = DA9062AA_GPIO_4,
- }, {
- .range_min = DA9062AA_GPIO_WKUP_MODE,
- .range_max = DA9062AA_GPIO_OUT3_4,
- }, {
- .range_min = DA9062AA_BUCK1_CONT,
- .range_max = DA9062AA_BUCK4_CONT,
- }, {
- .range_min = DA9062AA_BUCK3_CONT,
- .range_max = DA9062AA_BUCK3_CONT,
- }, {
- .range_min = DA9062AA_LDO1_CONT,
- .range_max = DA9062AA_LDO4_CONT,
- }, {
- .range_min = DA9062AA_DVC_1,
- .range_max = DA9062AA_DVC_1,
- }, {
- .range_min = DA9062AA_SEQ,
- .range_max = DA9062AA_ID_4_3,
- }, {
- .range_min = DA9062AA_ID_12_11,
- .range_max = DA9062AA_ID_16_15,
- }, {
- .range_min = DA9062AA_ID_22_21,
- .range_max = DA9062AA_ID_32_31,
- }, {
- .range_min = DA9062AA_SEQ_A,
- .range_max = DA9062AA_WAIT,
- }, {
- .range_min = DA9062AA_RESET,
- .range_max = DA9062AA_BUCK_ILIM_C,
- }, {
- .range_min = DA9062AA_BUCK1_CFG,
- .range_max = DA9062AA_BUCK3_CFG,
- }, {
- .range_min = DA9062AA_VBUCK1_A,
- .range_max = DA9062AA_VBUCK4_A,
- }, {
- .range_min = DA9062AA_VBUCK3_A,
- .range_max = DA9062AA_VBUCK3_A,
- }, {
- .range_min = DA9062AA_VLDO1_A,
- .range_max = DA9062AA_VLDO4_A,
- }, {
- .range_min = DA9062AA_VBUCK1_B,
- .range_max = DA9062AA_VBUCK4_B,
- }, {
- .range_min = DA9062AA_VBUCK3_B,
- .range_max = DA9062AA_VBUCK3_B,
- }, {
- .range_min = DA9062AA_VLDO1_B,
- .range_max = DA9062AA_VLDO4_B,
- }, {
- .range_min = DA9062AA_INTERFACE,
- .range_max = DA9062AA_CONFIG_E,
- }, {
- .range_min = DA9062AA_CONFIG_G,
- .range_max = DA9062AA_CONFIG_K,
- }, {
- .range_min = DA9062AA_CONFIG_M,
- .range_max = DA9062AA_CONFIG_M,
- }, {
- .range_min = DA9062AA_GP_ID_0,
- .range_max = DA9062AA_GP_ID_19,
- }, {
- .range_min = DA9062AA_DEVICE_ID,
- .range_max = DA9062AA_CONFIG_ID,
- },
+ regmap_reg_range(DA9062AA_PAGE_CON, DA9062AA_STATUS_B),
+ regmap_reg_range(DA9062AA_STATUS_D, DA9062AA_EVENT_C),
+ regmap_reg_range(DA9062AA_IRQ_MASK_A, DA9062AA_IRQ_MASK_C),
+ regmap_reg_range(DA9062AA_CONTROL_A, DA9062AA_GPIO_4),
+ regmap_reg_range(DA9062AA_GPIO_WKUP_MODE, DA9062AA_GPIO_OUT3_4),
+ regmap_reg_range(DA9062AA_BUCK1_CONT, DA9062AA_BUCK4_CONT),
+ regmap_reg_range(DA9062AA_BUCK3_CONT, DA9062AA_BUCK3_CONT),
+ regmap_reg_range(DA9062AA_LDO1_CONT, DA9062AA_LDO4_CONT),
+ regmap_reg_range(DA9062AA_DVC_1, DA9062AA_DVC_1),
+ regmap_reg_range(DA9062AA_SEQ, DA9062AA_ID_4_3),
+ regmap_reg_range(DA9062AA_ID_12_11, DA9062AA_ID_16_15),
+ regmap_reg_range(DA9062AA_ID_22_21, DA9062AA_ID_32_31),
+ regmap_reg_range(DA9062AA_SEQ_A, DA9062AA_WAIT),
+ regmap_reg_range(DA9062AA_RESET, DA9062AA_BUCK_ILIM_C),
+ regmap_reg_range(DA9062AA_BUCK1_CFG, DA9062AA_BUCK3_CFG),
+ regmap_reg_range(DA9062AA_VBUCK1_A, DA9062AA_VBUCK4_A),
+ regmap_reg_range(DA9062AA_VBUCK3_A, DA9062AA_VBUCK3_A),
+ regmap_reg_range(DA9062AA_VLDO1_A, DA9062AA_VLDO4_A),
+ regmap_reg_range(DA9062AA_VBUCK1_B, DA9062AA_VBUCK4_B),
+ regmap_reg_range(DA9062AA_VBUCK3_B, DA9062AA_VBUCK3_B),
+ regmap_reg_range(DA9062AA_VLDO1_B, DA9062AA_VLDO4_B),
+ regmap_reg_range(DA9062AA_INTERFACE, DA9062AA_CONFIG_E),
+ regmap_reg_range(DA9062AA_CONFIG_G, DA9062AA_CONFIG_K),
+ regmap_reg_range(DA9062AA_CONFIG_M, DA9062AA_CONFIG_M),
+ regmap_reg_range(DA9062AA_GP_ID_0, DA9062AA_GP_ID_19),
+ regmap_reg_range(DA9062AA_DEVICE_ID, DA9062AA_CONFIG_ID),
};
static const struct regmap_range da9061_aa_writeable_ranges[] = {
- {
- .range_min = DA9062AA_PAGE_CON,
- .range_max = DA9062AA_PAGE_CON,
- }, {
- .range_min = DA9062AA_FAULT_LOG,
- .range_max = DA9062AA_EVENT_C,
- }, {
- .range_min = DA9062AA_IRQ_MASK_A,
- .range_max = DA9062AA_IRQ_MASK_C,
- }, {
- .range_min = DA9062AA_CONTROL_A,
- .range_max = DA9062AA_GPIO_4,
- }, {
- .range_min = DA9062AA_GPIO_WKUP_MODE,
- .range_max = DA9062AA_GPIO_OUT3_4,
- }, {
- .range_min = DA9062AA_BUCK1_CONT,
- .range_max = DA9062AA_BUCK4_CONT,
- }, {
- .range_min = DA9062AA_BUCK3_CONT,
- .range_max = DA9062AA_BUCK3_CONT,
- }, {
- .range_min = DA9062AA_LDO1_CONT,
- .range_max = DA9062AA_LDO4_CONT,
- }, {
- .range_min = DA9062AA_DVC_1,
- .range_max = DA9062AA_DVC_1,
- }, {
- .range_min = DA9062AA_SEQ,
- .range_max = DA9062AA_ID_4_3,
- }, {
- .range_min = DA9062AA_ID_12_11,
- .range_max = DA9062AA_ID_16_15,
- }, {
- .range_min = DA9062AA_ID_22_21,
- .range_max = DA9062AA_ID_32_31,
- }, {
- .range_min = DA9062AA_SEQ_A,
- .range_max = DA9062AA_WAIT,
- }, {
- .range_min = DA9062AA_RESET,
- .range_max = DA9062AA_BUCK_ILIM_C,
- }, {
- .range_min = DA9062AA_BUCK1_CFG,
- .range_max = DA9062AA_BUCK3_CFG,
- }, {
- .range_min = DA9062AA_VBUCK1_A,
- .range_max = DA9062AA_VBUCK4_A,
- }, {
- .range_min = DA9062AA_VBUCK3_A,
- .range_max = DA9062AA_VBUCK3_A,
- }, {
- .range_min = DA9062AA_VLDO1_A,
- .range_max = DA9062AA_VLDO4_A,
- }, {
- .range_min = DA9062AA_VBUCK1_B,
- .range_max = DA9062AA_VBUCK4_B,
- }, {
- .range_min = DA9062AA_VBUCK3_B,
- .range_max = DA9062AA_VBUCK3_B,
- }, {
- .range_min = DA9062AA_VLDO1_B,
- .range_max = DA9062AA_VLDO4_B,
- }, {
- .range_min = DA9062AA_GP_ID_0,
- .range_max = DA9062AA_GP_ID_19,
- },
+ regmap_reg_range(DA9062AA_PAGE_CON, DA9062AA_PAGE_CON),
+ regmap_reg_range(DA9062AA_FAULT_LOG, DA9062AA_EVENT_C),
+ regmap_reg_range(DA9062AA_IRQ_MASK_A, DA9062AA_IRQ_MASK_C),
+ regmap_reg_range(DA9062AA_CONTROL_A, DA9062AA_GPIO_4),
+ regmap_reg_range(DA9062AA_GPIO_WKUP_MODE, DA9062AA_GPIO_OUT3_4),
+ regmap_reg_range(DA9062AA_BUCK1_CONT, DA9062AA_BUCK4_CONT),
+ regmap_reg_range(DA9062AA_BUCK3_CONT, DA9062AA_BUCK3_CONT),
+ regmap_reg_range(DA9062AA_LDO1_CONT, DA9062AA_LDO4_CONT),
+ regmap_reg_range(DA9062AA_DVC_1, DA9062AA_DVC_1),
+ regmap_reg_range(DA9062AA_SEQ, DA9062AA_ID_4_3),
+ regmap_reg_range(DA9062AA_ID_12_11, DA9062AA_ID_16_15),
+ regmap_reg_range(DA9062AA_ID_22_21, DA9062AA_ID_32_31),
+ regmap_reg_range(DA9062AA_SEQ_A, DA9062AA_WAIT),
+ regmap_reg_range(DA9062AA_RESET, DA9062AA_BUCK_ILIM_C),
+ regmap_reg_range(DA9062AA_BUCK1_CFG, DA9062AA_BUCK3_CFG),
+ regmap_reg_range(DA9062AA_VBUCK1_A, DA9062AA_VBUCK4_A),
+ regmap_reg_range(DA9062AA_VBUCK3_A, DA9062AA_VBUCK3_A),
+ regmap_reg_range(DA9062AA_VLDO1_A, DA9062AA_VLDO4_A),
+ regmap_reg_range(DA9062AA_VBUCK1_B, DA9062AA_VBUCK4_B),
+ regmap_reg_range(DA9062AA_VBUCK3_B, DA9062AA_VBUCK3_B),
+ regmap_reg_range(DA9062AA_VLDO1_B, DA9062AA_VLDO4_B),
+ regmap_reg_range(DA9062AA_GP_ID_0, DA9062AA_GP_ID_19),
};
static const struct regmap_range da9061_aa_volatile_ranges[] = {
- {
- .range_min = DA9062AA_PAGE_CON,
- .range_max = DA9062AA_STATUS_B,
- }, {
- .range_min = DA9062AA_STATUS_D,
- .range_max = DA9062AA_EVENT_C,
- }, {
- .range_min = DA9062AA_CONTROL_A,
- .range_max = DA9062AA_CONTROL_B,
- }, {
- .range_min = DA9062AA_CONTROL_E,
- .range_max = DA9062AA_CONTROL_F,
- }, {
- .range_min = DA9062AA_BUCK1_CONT,
- .range_max = DA9062AA_BUCK4_CONT,
- }, {
- .range_min = DA9062AA_BUCK3_CONT,
- .range_max = DA9062AA_BUCK3_CONT,
- }, {
- .range_min = DA9062AA_LDO1_CONT,
- .range_max = DA9062AA_LDO4_CONT,
- }, {
- .range_min = DA9062AA_DVC_1,
- .range_max = DA9062AA_DVC_1,
- }, {
- .range_min = DA9062AA_SEQ,
- .range_max = DA9062AA_SEQ,
- },
+ regmap_reg_range(DA9062AA_PAGE_CON, DA9062AA_STATUS_B),
+ regmap_reg_range(DA9062AA_STATUS_D, DA9062AA_EVENT_C),
+ regmap_reg_range(DA9062AA_CONTROL_A, DA9062AA_CONTROL_B),
+ regmap_reg_range(DA9062AA_CONTROL_E, DA9062AA_CONTROL_F),
+ regmap_reg_range(DA9062AA_BUCK1_CONT, DA9062AA_BUCK4_CONT),
+ regmap_reg_range(DA9062AA_BUCK3_CONT, DA9062AA_BUCK3_CONT),
+ regmap_reg_range(DA9062AA_LDO1_CONT, DA9062AA_LDO4_CONT),
+ regmap_reg_range(DA9062AA_DVC_1, DA9062AA_DVC_1),
+ regmap_reg_range(DA9062AA_SEQ, DA9062AA_SEQ),
};
static const struct regmap_access_table da9061_aa_readable_table = {
@@ -587,186 +470,69 @@ static int da9062_get_device_type(struct da9062 *chip)
};
static const struct regmap_range da9062_aa_readable_ranges[] = {
- {
- .range_min = DA9062AA_PAGE_CON,
- .range_max = DA9062AA_STATUS_B,
- }, {
- .range_min = DA9062AA_STATUS_D,
- .range_max = DA9062AA_EVENT_C,
- }, {
- .range_min = DA9062AA_IRQ_MASK_A,
- .range_max = DA9062AA_IRQ_MASK_C,
- }, {
- .range_min = DA9062AA_CONTROL_A,
- .range_max = DA9062AA_GPIO_4,
- }, {
- .range_min = DA9062AA_GPIO_WKUP_MODE,
- .range_max = DA9062AA_BUCK4_CONT,
- }, {
- .range_min = DA9062AA_BUCK3_CONT,
- .range_max = DA9062AA_BUCK3_CONT,
- }, {
- .range_min = DA9062AA_LDO1_CONT,
- .range_max = DA9062AA_LDO4_CONT,
- }, {
- .range_min = DA9062AA_DVC_1,
- .range_max = DA9062AA_DVC_1,
- }, {
- .range_min = DA9062AA_COUNT_S,
- .range_max = DA9062AA_SECOND_D,
- }, {
- .range_min = DA9062AA_SEQ,
- .range_max = DA9062AA_ID_4_3,
- }, {
- .range_min = DA9062AA_ID_12_11,
- .range_max = DA9062AA_ID_16_15,
- }, {
- .range_min = DA9062AA_ID_22_21,
- .range_max = DA9062AA_ID_32_31,
- }, {
- .range_min = DA9062AA_SEQ_A,
- .range_max = DA9062AA_BUCK3_CFG,
- }, {
- .range_min = DA9062AA_VBUCK2_A,
- .range_max = DA9062AA_VBUCK4_A,
- }, {
- .range_min = DA9062AA_VBUCK3_A,
- .range_max = DA9062AA_VBUCK3_A,
- }, {
- .range_min = DA9062AA_VLDO1_A,
- .range_max = DA9062AA_VLDO4_A,
- }, {
- .range_min = DA9062AA_VBUCK2_B,
- .range_max = DA9062AA_VBUCK4_B,
- }, {
- .range_min = DA9062AA_VBUCK3_B,
- .range_max = DA9062AA_VBUCK3_B,
- }, {
- .range_min = DA9062AA_VLDO1_B,
- .range_max = DA9062AA_VLDO4_B,
- }, {
- .range_min = DA9062AA_BBAT_CONT,
- .range_max = DA9062AA_BBAT_CONT,
- }, {
- .range_min = DA9062AA_INTERFACE,
- .range_max = DA9062AA_CONFIG_E,
- }, {
- .range_min = DA9062AA_CONFIG_G,
- .range_max = DA9062AA_CONFIG_K,
- }, {
- .range_min = DA9062AA_CONFIG_M,
- .range_max = DA9062AA_CONFIG_M,
- }, {
- .range_min = DA9062AA_TRIM_CLDR,
- .range_max = DA9062AA_GP_ID_19,
- }, {
- .range_min = DA9062AA_DEVICE_ID,
- .range_max = DA9062AA_CONFIG_ID,
- },
+ regmap_reg_range(DA9062AA_PAGE_CON, DA9062AA_STATUS_B),
+ regmap_reg_range(DA9062AA_STATUS_D, DA9062AA_EVENT_C),
+ regmap_reg_range(DA9062AA_IRQ_MASK_A, DA9062AA_IRQ_MASK_C),
+ regmap_reg_range(DA9062AA_CONTROL_A, DA9062AA_GPIO_4),
+ regmap_reg_range(DA9062AA_GPIO_WKUP_MODE, DA9062AA_BUCK4_CONT),
+ regmap_reg_range(DA9062AA_BUCK3_CONT, DA9062AA_BUCK3_CONT),
+ regmap_reg_range(DA9062AA_LDO1_CONT, DA9062AA_LDO4_CONT),
+ regmap_reg_range(DA9062AA_DVC_1, DA9062AA_DVC_1),
+ regmap_reg_range(DA9062AA_COUNT_S, DA9062AA_SECOND_D),
+ regmap_reg_range(DA9062AA_SEQ, DA9062AA_ID_4_3),
+ regmap_reg_range(DA9062AA_ID_12_11, DA9062AA_ID_16_15),
+ regmap_reg_range(DA9062AA_ID_22_21, DA9062AA_ID_32_31),
+ regmap_reg_range(DA9062AA_SEQ_A, DA9062AA_BUCK3_CFG),
+ regmap_reg_range(DA9062AA_VBUCK2_A, DA9062AA_VBUCK4_A),
+ regmap_reg_range(DA9062AA_VBUCK3_A, DA9062AA_VBUCK3_A),
+ regmap_reg_range(DA9062AA_VLDO1_A, DA9062AA_VLDO4_A),
+ regmap_reg_range(DA9062AA_VBUCK2_B, DA9062AA_VBUCK4_B),
+ regmap_reg_range(DA9062AA_VBUCK3_B, DA9062AA_VBUCK3_B),
+ regmap_reg_range(DA9062AA_VLDO1_B, DA9062AA_VLDO4_B),
+ regmap_reg_range(DA9062AA_BBAT_CONT, DA9062AA_BBAT_CONT),
+ regmap_reg_range(DA9062AA_INTERFACE, DA9062AA_CONFIG_E),
+ regmap_reg_range(DA9062AA_CONFIG_G, DA9062AA_CONFIG_K),
+ regmap_reg_range(DA9062AA_CONFIG_M, DA9062AA_CONFIG_M),
+ regmap_reg_range(DA9062AA_TRIM_CLDR, DA9062AA_GP_ID_19),
+ regmap_reg_range(DA9062AA_DEVICE_ID, DA9062AA_CONFIG_ID),
};
static const struct regmap_range da9062_aa_writeable_ranges[] = {
- {
- .range_min = DA9062AA_PAGE_CON,
- .range_max = DA9062AA_PAGE_CON,
- }, {
- .range_min = DA9062AA_FAULT_LOG,
- .range_max = DA9062AA_EVENT_C,
- }, {
- .range_min = DA9062AA_IRQ_MASK_A,
- .range_max = DA9062AA_IRQ_MASK_C,
- }, {
- .range_min = DA9062AA_CONTROL_A,
- .range_max = DA9062AA_GPIO_4,
- }, {
- .range_min = DA9062AA_GPIO_WKUP_MODE,
- .range_max = DA9062AA_BUCK4_CONT,
- }, {
- .range_min = DA9062AA_BUCK3_CONT,
- .range_max = DA9062AA_BUCK3_CONT,
- }, {
- .range_min = DA9062AA_LDO1_CONT,
- .range_max = DA9062AA_LDO4_CONT,
- }, {
- .range_min = DA9062AA_DVC_1,
- .range_max = DA9062AA_DVC_1,
- }, {
- .range_min = DA9062AA_COUNT_S,
- .range_max = DA9062AA_ALARM_Y,
- }, {
- .range_min = DA9062AA_SEQ,
- .range_max = DA9062AA_ID_4_3,
- }, {
- .range_min = DA9062AA_ID_12_11,
- .range_max = DA9062AA_ID_16_15,
- }, {
- .range_min = DA9062AA_ID_22_21,
- .range_max = DA9062AA_ID_32_31,
- }, {
- .range_min = DA9062AA_SEQ_A,
- .range_max = DA9062AA_BUCK3_CFG,
- }, {
- .range_min = DA9062AA_VBUCK2_A,
- .range_max = DA9062AA_VBUCK4_A,
- }, {
- .range_min = DA9062AA_VBUCK3_A,
- .range_max = DA9062AA_VBUCK3_A,
- }, {
- .range_min = DA9062AA_VLDO1_A,
- .range_max = DA9062AA_VLDO4_A,
- }, {
- .range_min = DA9062AA_VBUCK2_B,
- .range_max = DA9062AA_VBUCK4_B,
- }, {
- .range_min = DA9062AA_VBUCK3_B,
- .range_max = DA9062AA_VBUCK3_B,
- }, {
- .range_min = DA9062AA_VLDO1_B,
- .range_max = DA9062AA_VLDO4_B,
- }, {
- .range_min = DA9062AA_BBAT_CONT,
- .range_max = DA9062AA_BBAT_CONT,
- }, {
- .range_min = DA9062AA_GP_ID_0,
- .range_max = DA9062AA_GP_ID_19,
- },
+ regmap_reg_range(DA9062AA_PAGE_CON, DA9062AA_PAGE_CON),
+ regmap_reg_range(DA9062AA_FAULT_LOG, DA9062AA_EVENT_C),
+ regmap_reg_range(DA9062AA_IRQ_MASK_A, DA9062AA_IRQ_MASK_C),
+ regmap_reg_range(DA9062AA_CONTROL_A, DA9062AA_GPIO_4),
+ regmap_reg_range(DA9062AA_GPIO_WKUP_MODE, DA9062AA_BUCK4_CONT),
+ regmap_reg_range(DA9062AA_BUCK3_CONT, DA9062AA_BUCK3_CONT),
+ regmap_reg_range(DA9062AA_LDO1_CONT, DA9062AA_LDO4_CONT),
+ regmap_reg_range(DA9062AA_DVC_1, DA9062AA_DVC_1),
+ regmap_reg_range(DA9062AA_COUNT_S, DA9062AA_ALARM_Y),
+ regmap_reg_range(DA9062AA_SEQ, DA9062AA_ID_4_3),
+ regmap_reg_range(DA9062AA_ID_12_11, DA9062AA_ID_16_15),
+ regmap_reg_range(DA9062AA_ID_22_21, DA9062AA_ID_32_31),
+ regmap_reg_range(DA9062AA_SEQ_A, DA9062AA_BUCK3_CFG),
+ regmap_reg_range(DA9062AA_VBUCK2_A, DA9062AA_VBUCK4_A),
+ regmap_reg_range(DA9062AA_VBUCK3_A, DA9062AA_VBUCK3_A),
+ regmap_reg_range(DA9062AA_VLDO1_A, DA9062AA_VLDO4_A),
+ regmap_reg_range(DA9062AA_VBUCK2_B, DA9062AA_VBUCK4_B),
+ regmap_reg_range(DA9062AA_VBUCK3_B, DA9062AA_VBUCK3_B),
+ regmap_reg_range(DA9062AA_VLDO1_B, DA9062AA_VLDO4_B),
+ regmap_reg_range(DA9062AA_BBAT_CONT, DA9062AA_BBAT_CONT),
+ regmap_reg_range(DA9062AA_GP_ID_0, DA9062AA_GP_ID_19),
};
static const struct regmap_range da9062_aa_volatile_ranges[] = {
- {
- .range_min = DA9062AA_PAGE_CON,
- .range_max = DA9062AA_STATUS_B,
- }, {
- .range_min = DA9062AA_STATUS_D,
- .range_max = DA9062AA_EVENT_C,
- }, {
- .range_min = DA9062AA_CONTROL_A,
- .range_max = DA9062AA_CONTROL_B,
- }, {
- .range_min = DA9062AA_CONTROL_E,
- .range_max = DA9062AA_CONTROL_F,
- }, {
- .range_min = DA9062AA_BUCK2_CONT,
- .range_max = DA9062AA_BUCK4_CONT,
- }, {
- .range_min = DA9062AA_BUCK3_CONT,
- .range_max = DA9062AA_BUCK3_CONT,
- }, {
- .range_min = DA9062AA_LDO1_CONT,
- .range_max = DA9062AA_LDO4_CONT,
- }, {
- .range_min = DA9062AA_DVC_1,
- .range_max = DA9062AA_DVC_1,
- }, {
- .range_min = DA9062AA_COUNT_S,
- .range_max = DA9062AA_SECOND_D,
- }, {
- .range_min = DA9062AA_SEQ,
- .range_max = DA9062AA_SEQ,
- }, {
- .range_min = DA9062AA_EN_32K,
- .range_max = DA9062AA_EN_32K,
- },
+ regmap_reg_range(DA9062AA_PAGE_CON, DA9062AA_STATUS_B),
+ regmap_reg_range(DA9062AA_STATUS_D, DA9062AA_EVENT_C),
+ regmap_reg_range(DA9062AA_CONTROL_A, DA9062AA_CONTROL_B),
+ regmap_reg_range(DA9062AA_CONTROL_E, DA9062AA_CONTROL_F),
+ regmap_reg_range(DA9062AA_BUCK2_CONT, DA9062AA_BUCK4_CONT),
+ regmap_reg_range(DA9062AA_BUCK3_CONT, DA9062AA_BUCK3_CONT),
+ regmap_reg_range(DA9062AA_LDO1_CONT, DA9062AA_LDO4_CONT),
+ regmap_reg_range(DA9062AA_DVC_1, DA9062AA_DVC_1),
+ regmap_reg_range(DA9062AA_COUNT_S, DA9062AA_SECOND_D),
+ regmap_reg_range(DA9062AA_SEQ, DA9062AA_SEQ),
+ regmap_reg_range(DA9062AA_EN_32K, DA9062AA_EN_32K),
};
static const struct regmap_access_table da9062_aa_readable_table = {
--
end-of-patch for PATCH V1
next reply other threads:[~2018-03-28 11:06 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-28 11:03 Steve Twiss [this message]
2018-03-28 15:29 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180328110612.1FCAD3FACC@swsrvapps-01.diasemi.com \
--to=stwiss.opensource@diasemi.com \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=support.opensource@diasemi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®