From: "Matias Bjørling" <mb@lightnvm.io>
To: axboe@fb.com
Cc: linux-block@vger.kernel.org, linux-kernel@vger.kernel.org,
keith.busch@intel.com, javier@cnexlabs.com,
"Matias Bjørling" <mb@lightnvm.io>
Subject: [GIT PULL 00/37] lightnvm patches for 4.17
Date: Fri, 30 Mar 2018 00:04:47 +0200 [thread overview]
Message-ID: <20180329220524.30363-1-mb@lightnvm.io> (raw)
Hi Jens,
Here is a bunch of patches for 4.17. They include:
- Open-Channel 2.0 support by Javier and I.
- Lots of refactoring patches to enable 2.0 support.
- Fixes to pblk from Hans, Markus, and Dan.
- Introduction of write amplication and padding counters. From Hans.
- Fix from Johannes to unify the permission checks for the lightnvm
ioctls.
- Fixes from Heiner for bad block initialization and
over-provisioning validation.
Please pick up when convenient.
-Matias
Dan Carpenter (1):
lightnvm: pblk: remove some unnecessary NULL checks
Hans Holmberg (8):
lightnvm: pblk: handle bad sectors in the emeta area correctly
lightnvm: pblk: check data lines version on recovery
lightnvm: pblk: export write amplification counters to sysfs
lightnvm: pblk: add padding distribution sysfs attribute
lightnvm: pblk: delete writer kick timer before stopping thread
lightnvm: pblk: allow allocation of new lines during shutdown
lightnvm: pblk: prevent race in pblk_rb_flush_point_set
lightnvm: pblk: don't recover unwritten lines
Heiner Litz (2):
lightnvm: fix bad block initialization
lightnvm: Avoid validation of default op value
Javier González (14):
lightnvm: pblk: refactor bad block identification
lightnvm: pblk: refactor init/exit sequences
lightnvm: simplify geometry structure
lightnvm: add minor version to generic geometry
lightnvm: add shorten OCSSD version in geo
lightnvm: complete geo structure with maxoc*
lightnvm: normalize geometry nomenclature
lightnvm: add support for 2.0 address format
lightnvm: make address conversions depend on generic device
lightnvm: implement get log report chunk helpers
lightnvm: pblk: check for supported version
lightnvm: pblk: rename ppaf* to addrf*
lightnvm: pblk: implement get log report chunk
lightnvm: pblk: implement 2.0 support
Johannes Thumshirn (1):
lightnvm: centralize permission check for lightnvm ioctl
Markus Elfring (1):
lightnvm/pblk-gc: Delete an error message for a failed memory
allocation in pblk_gc_line_prepare_ws()
Matias Bjørling (10):
lightnvm: remove chnl_offset in nvme_nvm_identity
lightnvm: remove mlc pairs structure
lightnvm: remove multiple groups in 1.2 data structure
lightnvm: make 1.2 data structures explicit
lightnvm: flatten nvm_id_group into nvm_id
lightnvm: add 2.0 geometry identification
lightnvm: remove max_rq_size
lightnvm: remove nvm_dev_ops->max_phys_sect
nvme: lightnvm: add late setup of block size and metadata
lightnvm: remove function name in strings
drivers/lightnvm/core.c | 238 +++++------
drivers/lightnvm/pblk-cache.c | 4 +
drivers/lightnvm/pblk-core.c | 202 +++++++---
drivers/lightnvm/pblk-gc.c | 12 +-
drivers/lightnvm/pblk-init.c | 850 +++++++++++++++++++++++----------------
drivers/lightnvm/pblk-map.c | 6 +-
drivers/lightnvm/pblk-rb.c | 21 +-
drivers/lightnvm/pblk-read.c | 2 +-
drivers/lightnvm/pblk-recovery.c | 91 ++++-
drivers/lightnvm/pblk-rl.c | 2 +-
drivers/lightnvm/pblk-sysfs.c | 235 +++++++++--
drivers/lightnvm/pblk-write.c | 2 +-
drivers/lightnvm/pblk.h | 304 ++++++++++----
drivers/nvme/host/core.c | 6 +-
drivers/nvme/host/lightnvm.c | 747 ++++++++++++++++++++++++++--------
drivers/nvme/host/nvme.h | 2 +
include/linux/lightnvm.h | 338 ++++++++++------
17 files changed, 2090 insertions(+), 972 deletions(-)
--
2.11.0
next reply other threads:[~2018-03-29 22:07 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-29 22:04 Matias Bjørling [this message]
2018-03-29 22:04 ` [GIT PULL 01/37] lightnvm/pblk-gc: Delete an error message for a failed memory allocation in pblk_gc_line_prepare_ws() Matias Bjørling
2018-03-29 22:04 ` [GIT PULL 02/37] lightnvm: remove chnl_offset in nvme_nvm_identity Matias Bjørling
2018-03-29 22:04 ` [GIT PULL 03/37] lightnvm: pblk: handle bad sectors in the emeta area correctly Matias Bjørling
2018-03-29 22:04 ` [GIT PULL 04/37] lightnvm: pblk: check data lines version on recovery Matias Bjørling
2018-03-29 22:04 ` [GIT PULL 05/37] lightnvm: pblk: export write amplification counters to sysfs Matias Bjørling
2018-03-29 22:04 ` [GIT PULL 06/37] lightnvm: remove mlc pairs structure Matias Bjørling
2018-03-29 22:04 ` [GIT PULL 07/37] lightnvm: remove multiple groups in 1.2 data structure Matias Bjørling
2018-03-29 22:04 ` [GIT PULL 08/37] lightnvm: pblk: add padding distribution sysfs attribute Matias Bjørling
2018-03-29 22:04 ` [GIT PULL 09/37] lightnvm: pblk: delete writer kick timer before stopping thread Matias Bjørling
2018-03-29 22:04 ` [GIT PULL 10/37] lightnvm: pblk: allow allocation of new lines during shutdown Matias Bjørling
2018-03-29 22:04 ` [GIT PULL 11/37] lightnvm: pblk: prevent race in pblk_rb_flush_point_set Matias Bjørling
2018-03-29 22:04 ` [GIT PULL 12/37] lightnvm: pblk: refactor bad block identification Matias Bjørling
2018-03-29 22:05 ` [GIT PULL 13/37] lightnvm: make 1.2 data structures explicit Matias Bjørling
2018-03-29 22:05 ` [GIT PULL 14/37] lightnvm: flatten nvm_id_group into nvm_id Matias Bjørling
2018-03-29 22:05 ` [GIT PULL 15/37] lightnvm: add 2.0 geometry identification Matias Bjørling
2018-03-29 22:05 ` [GIT PULL 16/37] lightnvm: remove max_rq_size Matias Bjørling
2018-03-29 22:05 ` [GIT PULL 17/37] lightnvm: remove nvm_dev_ops->max_phys_sect Matias Bjørling
2018-03-29 22:05 ` [GIT PULL 18/37] nvme: lightnvm: add late setup of block size and metadata Matias Bjørling
2018-03-29 22:05 ` [GIT PULL 19/37] lightnvm: fix bad block initialization Matias Bjørling
2018-03-29 22:05 ` [GIT PULL 20/37] lightnvm: centralize permission check for lightnvm ioctl Matias Bjørling
2018-03-29 22:05 ` [GIT PULL 21/37] lightnvm: Avoid validation of default op value Matias Bjørling
2018-03-29 22:05 ` [GIT PULL 22/37] lightnvm: pblk: refactor init/exit sequences Matias Bjørling
2018-03-29 22:05 ` [GIT PULL 23/37] lightnvm: simplify geometry structure Matias Bjørling
2018-03-29 22:05 ` [GIT PULL 24/37] lightnvm: add minor version to generic geometry Matias Bjørling
2018-03-29 22:05 ` [GIT PULL 25/37] lightnvm: add shorten OCSSD version in geo Matias Bjørling
2018-03-29 22:05 ` [GIT PULL 26/37] lightnvm: complete geo structure with maxoc* Matias Bjørling
2018-03-29 22:05 ` [GIT PULL 27/37] lightnvm: normalize geometry nomenclature Matias Bjørling
2018-03-29 22:05 ` [GIT PULL 28/37] lightnvm: add support for 2.0 address format Matias Bjørling
2018-03-29 22:05 ` [GIT PULL 29/37] lightnvm: make address conversions depend on generic device Matias Bjørling
2018-03-29 22:05 ` [GIT PULL 30/37] lightnvm: implement get log report chunk helpers Matias Bjørling
2018-03-29 22:05 ` [GIT PULL 31/37] lightnvm: pblk: check for supported version Matias Bjørling
2018-03-29 22:05 ` [GIT PULL 32/37] lightnvm: pblk: rename ppaf* to addrf* Matias Bjørling
2018-03-29 22:05 ` [GIT PULL 33/37] lightnvm: pblk: implement get log report chunk Matias Bjørling
2018-03-29 22:05 ` [GIT PULL 34/37] lightnvm: pblk: implement 2.0 support Matias Bjørling
2018-03-29 22:05 ` [GIT PULL 35/37] lightnvm: pblk: don't recover unwritten lines Matias Bjørling
2018-03-29 22:05 ` [GIT PULL 36/37] lightnvm: pblk: remove some unnecessary NULL checks Matias Bjørling
2018-03-29 22:05 ` [GIT PULL 37/37] lightnvm: remove function name in strings Matias Bjørling
2018-03-29 23:30 ` [GIT PULL 00/37] lightnvm patches for 4.17 Jens Axboe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180329220524.30363-1-mb@lightnvm.io \
--to=mb@lightnvm.io \
--cc=axboe@fb.com \
--cc=javier@cnexlabs.com \
--cc=keith.busch@intel.com \
--cc=linux-block@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®