mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Lukasz Majewski <lukma@denx.de>
To: Ulf Hansson <ulf.hansson@linaro.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	linux-kernel@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Adrian Hunter <adrian.hunter@intel.com>,
	Fabio Estevam <fabio.estevam@nxp.com>,
	Wolfram Sang <wsa+renesas@sang-engineering.com>,
	Chanho Min <chanho.min@lge.com>,
	devicetree@vger.kernel.org, linux-mmc@vger.kernel.org,
	Stanislav Meduna <stanislav.meduna@nxtcontrol.com>,
	Lukasz Majewski <lukma@denx.de>
Subject: [PATCH] mmc: disable card sleep via device-tree
Date: Sun, 22 Apr 2018 23:31:26 +0200	[thread overview]
Message-ID: <20180422213126.32756-1-lukma@denx.de> (raw)

From: Stanislav Meduna <stanislav.meduna@nxtcontrol.com>

On a TQMa53 module the mmc_sleep leaves the eMMC card in a state
that the imx53 rom boot code is unable to probe, resulting in
reboot hanging. Add a device tree property to disable sleeping
on suspend.

For TQMa53 modules the exact commit to cause hang after reboot
(v3.10 -> v3.11):
commit 486fdbbc1483 ("mmc: core: Add shutdown callback for (e)MMC bus_ops")

[The exact discussion can be found here:
https://patchwork.kernel.org/patch/8881401/
"i.MX53 restart via watchdog does not work"

Signed-off-by: Stanislav Meduna <stanislav.meduna@nxtcontrol.com>
Signed-off-by: Lukasz Majewski <lukma@denx.de>
---
 Documentation/devicetree/bindings/mmc/mmc-card.txt | 4 ++++
 drivers/mmc/core/mmc.c                             | 7 +++++--
 include/linux/mmc/card.h                           | 2 +-
 3 files changed, 10 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/mmc/mmc-card.txt b/Documentation/devicetree/bindings/mmc/mmc-card.txt
index 8d2d71758907..c3ee151edd7c 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-card.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc-card.txt
@@ -12,6 +12,9 @@ Required properties:
 Optional properties:
 -broken-hpi : Use this to indicate that the mmc-card has a broken hpi
               implementation, and that hpi should not be used
+-no-sleep-on-suspend : Do not put the card to sleep when suspending.
+              There are boards with bootloaders that are unable
+              to probe such card when rebooting.
 
 Example:
 
@@ -26,5 +29,6 @@ Example:
 		reg = <0>;
 		compatible = "mmc-card";
 		broken-hpi;
+		no-sleep-on-suspend;
 	};
 };
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 208a762b87ef..a3b74b5c8893 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -381,8 +381,11 @@ static int mmc_decode_ext_csd(struct mmc_card *card, u8 *ext_csd)
 	}
 
 	np = mmc_of_find_child_device(card->host, 0);
-	if (np && of_device_is_compatible(np, "mmc-card"))
+	if (np && of_device_is_compatible(np, "mmc-card")) {
 		broken_hpi = of_property_read_bool(np, "broken-hpi");
+		card->no_sleep_on_suspend =
+			of_property_read_bool(np, "no-sleep-on-suspend");
+	}
 	of_node_put(np);
 
 	/*
@@ -1990,7 +1993,7 @@ static int _mmc_suspend(struct mmc_host *host, bool is_suspend)
 	if (mmc_can_poweroff_notify(host->card) &&
 		((host->caps2 & MMC_CAP2_FULL_PWR_CYCLE) || !is_suspend))
 		err = mmc_poweroff_notify(host->card, notify_type);
-	else if (mmc_can_sleep(host->card))
+	else if (mmc_can_sleep(host->card) && !host->card->no_sleep_on_suspend)
 		err = mmc_sleep(host);
 	else if (!mmc_host_is_spi(host))
 		err = mmc_deselect_cards(host);
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index 279b39008a33..c64d88e6de3b 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -304,8 +304,8 @@ struct mmc_card {
 	struct dentry		*debugfs_root;
 	struct mmc_part	part[MMC_NUM_PHY_PARTITION]; /* physical partitions */
 	unsigned int    nr_parts;
-
 	unsigned int		bouncesz;	/* Bounce buffer size */
+	bool	no_sleep_on_suspend;
 };
 
 static inline bool mmc_large_sector(struct mmc_card *card)
-- 
2.11.0

             reply	other threads:[~2018-04-22 21:31 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-22 21:31 Lukasz Majewski [this message]
2018-04-23  6:04 ` Vladimir Zapolskiy
2018-04-23  8:26 ` Ulf Hansson
2018-04-23  9:36   ` Lukasz Majewski
2018-04-23 10:24     ` Ulf Hansson
2018-04-23 14:11       ` Lukasz Majewski
2018-04-23 15:01         ` Ulf Hansson
2018-04-30  9:13 ` Linus Walleij
2018-04-30  9:31   ` Lukasz Majewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180422213126.32756-1-lukma@denx.de \
    --to=lukma@denx.de \
    --cc=adrian.hunter@intel.com \
    --cc=chanho.min@lge.com \
    --cc=devicetree@vger.kernel.org \
    --cc=fabio.estevam@nxp.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=stanislav.meduna@nxtcontrol.com \
    --cc=ulf.hansson@linaro.org \
    --cc=wsa+renesas@sang-engineering.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®