From: Janusz Krzysztofik <jmkrzyszt@gmail.com>
To: Tony Lindgren <tony@atomide.com>
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>,
linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org,
linux-kernel@vger.kernel.org,
Janusz Krzysztofik <jmkrzyszt@gmail.com>
Subject: [PATCH] arm: omap1: ams-delta: fix deferred_fiq handler
Date: Wed, 2 May 2018 20:32:03 +0200 [thread overview]
Message-ID: <20180502183203.16034-1-jmkrzyszt@gmail.com> (raw)
The deferred_fiq handler used to limit hardware operations to IRQ
unmask only, relying on gpio-omap assigned handler performing the ACKs.
Since commit 80ac93c27441 ("gpio: omap: Fix lost edge interrupts") this
is no longer the case as handle_edge_irq() has been replaced with
handle_simmple_irq() which doesn't touch the hardware.
Add single ACK operation per each active IRQ pin to the handler. While
being at it, move unmask operation out of irq_counter loop so it is
also called only once for each active IRQ pin.
Created and tested against linux-4.17-rc2.
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
---
arch/arm/mach-omap1/ams-delta-fiq.c | 28 +++++++++++++++-------------
1 file changed, 15 insertions(+), 13 deletions(-)
diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c
index 793a24a53c52..d7ca9e2b40d2 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq.c
+++ b/arch/arm/mach-omap1/ams-delta-fiq.c
@@ -58,22 +58,24 @@ static irqreturn_t deferred_fiq(int irq, void *dev_id)
irq_num = gpio_to_irq(gpio);
fiq_count = fiq_buffer[FIQ_CNT_INT_00 + gpio];
- while (irq_counter[gpio] < fiq_count) {
- if (gpio != AMS_DELTA_GPIO_PIN_KEYBRD_CLK) {
- struct irq_data *d = irq_get_irq_data(irq_num);
-
- /*
- * It looks like handle_edge_irq() that
- * OMAP GPIO edge interrupts default to,
- * expects interrupt already unmasked.
- */
- if (irq_chip && irq_chip->irq_unmask)
+ if (irq_counter[gpio] < fiq_count &&
+ gpio != AMS_DELTA_GPIO_PIN_KEYBRD_CLK) {
+ struct irq_data *d = irq_get_irq_data(irq_num);
+
+ /*
+ * handle_simple_irq() that OMAP GPIO edge
+ * interrupts default to since commit 80ac93c27441
+ * requires interrupt already acked and unmasked.
+ */
+ if (irq_chip) {
+ if (irq_chip->irq_ack)
+ irq_chip->irq_ack(d);
+ if (irq_chip->irq_unmask)
irq_chip->irq_unmask(d);
}
- generic_handle_irq(irq_num);
-
- irq_counter[gpio]++;
}
+ for (; irq_counter[gpio] < fiq_count; irq_counter[gpio]++)
+ generic_handle_irq(irq_num);
}
return IRQ_HANDLED;
}
--
2.16.1
next reply other threads:[~2018-05-02 18:32 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-02 18:32 Janusz Krzysztofik [this message]
2018-05-03 17:08 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180502183203.16034-1-jmkrzyszt@gmail.com \
--to=jmkrzyszt@gmail.com \
--cc=aaro.koskinen@iki.fi \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®