From: Danny Milosavljevic <dannym@scratchpost.org>
To: Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
Takashi Iwai <tiwai@suse.com>,
Maxime Ripard <maxime.ripard@free-electrons.com>,
Chen-Yu Tsai <wens@csie.org>,
Danny Milosavljevic <dannym@scratchpost.org>,
Andrea Bondavalli <andrea.bondavalli74@gmail.com>,
Fabio Estevam <fabio.estevam@nxp.com>,
Icenowy Zheng <icenowy@aosc.xyz>,
Philipp Zabel <p.zabel@pengutronix.de>,
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>,
alsa-devel@alsa-project.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com
Subject: [PATCH v14 2/8] ASoC: sun4i-codec: Add Mic1 Boost Volume, Mic2 Boost Volume
Date: Wed, 2 May 2018 23:07:54 +0200 [thread overview]
Message-ID: <20180502210800.1971-3-dannym@scratchpost.org> (raw)
In-Reply-To: <20180502210800.1971-1-dannym@scratchpost.org>
Add Mic1 Boost Volume and Mic2 Boost Volume for Allwinner A10 and Allwinner
A20. Also add support for extra controls to the sun4i_codec_quirks because
the A10 and A20 have Mic1 Boost Volume at different places (likewise for
Mic2 Boost Volume).
Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org>
---
sound/soc/sunxi/sun4i-codec.c | 66 ++++++++++++++++++++++++++++++++++++-------
1 file changed, 56 insertions(+), 10 deletions(-)
diff --git a/sound/soc/sunxi/sun4i-codec.c b/sound/soc/sunxi/sun4i-codec.c
index 060a40b45ab0..4af286f44a67 100644
--- a/sound/soc/sunxi/sun4i-codec.c
+++ b/sound/soc/sunxi/sun4i-codec.c
@@ -95,6 +95,8 @@
#define SUN4I_CODEC_ADC_ACTL_PREG1EN (29)
#define SUN4I_CODEC_ADC_ACTL_PREG2EN (28)
#define SUN4I_CODEC_ADC_ACTL_VMICEN (27)
+#define SUN4I_CODEC_ADC_ACTL_PREG1 (25)
+#define SUN4I_CODEC_ADC_ACTL_PREG2 (23)
#define SUN4I_CODEC_ADC_ACTL_VADCG (20)
#define SUN4I_CODEC_ADC_ACTL_ADCIS (17)
#define SUN4I_CODEC_ADC_ACTL_PA_EN (4)
@@ -111,6 +113,9 @@
/* Microphone controls (sun7i only) */
#define SUN7I_CODEC_AC_MIC_PHONE_CAL (0x3c)
+#define SUN7I_CODEC_AC_MIC_PHONE_CAL_PREG1 (29)
+#define SUN7I_CODEC_AC_MIC_PHONE_CAL_PREG2 (26)
+
/*
* sun6i specific registers
*
@@ -676,6 +681,12 @@ static const struct snd_kcontrol_new sun4i_codec_pa_mute =
static DECLARE_TLV_DB_SCALE(sun4i_codec_pa_volume_scale, -6300, 100, 1);
static DECLARE_TLV_DB_SCALE(sun4i_codec_micin_loopback_gain_scale, -450, 150,
0);
+static DECLARE_TLV_DB_RANGE(sun4i_codec_micin_preamp_gain_scale,
+ 0, 0, TLV_DB_SCALE_ITEM(0, 0, 0),
+ 1, 7, TLV_DB_SCALE_ITEM(3500, 300, 0));
+static DECLARE_TLV_DB_RANGE(sun7i_codec_micin_preamp_gain_scale,
+ 0, 0, TLV_DB_SCALE_ITEM(0, 0, 0),
+ 1, 7, TLV_DB_SCALE_ITEM(2400, 300, 0));
static const struct snd_kcontrol_new sun4i_codec_controls[] = {
SOC_SINGLE_TLV("Power Amplifier Volume", SUN4I_CODEC_DAC_ACTL,
@@ -686,6 +697,24 @@ static const struct snd_kcontrol_new sun4i_codec_controls[] = {
sun4i_codec_micin_loopback_gain_scale),
};
+static const struct snd_kcontrol_new sun4i_codec_extra_controls[] = {
+ SOC_SINGLE_TLV("Mic1 Boost Volume", SUN4I_CODEC_ADC_ACTL,
+ SUN4I_CODEC_ADC_ACTL_PREG1, 3, 0,
+ sun4i_codec_micin_preamp_gain_scale),
+ SOC_SINGLE_TLV("Mic2 Boost Volume", SUN4I_CODEC_ADC_ACTL,
+ SUN4I_CODEC_ADC_ACTL_PREG2, 3, 0,
+ sun4i_codec_micin_preamp_gain_scale),
+};
+
+static const struct snd_kcontrol_new sun7i_codec_extra_controls[] = {
+ SOC_SINGLE_TLV("Mic1 Boost Volume", SUN7I_CODEC_AC_MIC_PHONE_CAL,
+ SUN7I_CODEC_AC_MIC_PHONE_CAL_PREG1, 7, 0,
+ sun7i_codec_micin_preamp_gain_scale),
+ SOC_SINGLE_TLV("Mic2 Boost Volume", SUN7I_CODEC_AC_MIC_PHONE_CAL,
+ SUN7I_CODEC_AC_MIC_PHONE_CAL_PREG2, 7, 0,
+ sun7i_codec_micin_preamp_gain_scale),
+};
+
static const struct snd_kcontrol_new sun4i_codec_left_mixer_controls[] = {
SOC_DAPM_SINGLE("Left DAC Playback Switch", SUN4I_CODEC_DAC_ACTL,
SUN4I_CODEC_DAC_ACTL_LDACLMIXS, 1, 0),
@@ -807,7 +836,30 @@ static const struct snd_soc_dapm_route sun4i_codec_codec_dapm_routes[] = {
{ "Mic2", NULL, "VMIC" },
};
+struct sun4i_codec_quirks {
+ const struct regmap_config *regmap_config;
+ const struct snd_soc_component_driver *codec;
+ struct snd_soc_card * (*create_card)(struct device *dev);
+ struct reg_field reg_adc_fifoc; /* used for regmap_field */
+ unsigned int reg_dac_txdata; /* TX FIFO offset for DMA config */
+ unsigned int reg_adc_rxdata; /* RX FIFO offset for DMA config */
+ bool has_reset;
+ const struct snd_kcontrol_new *controls;
+ unsigned int num_controls;
+};
+
+static int sun4i_codec_component_driver_probe(struct snd_soc_component *codec)
+{
+ const struct sun4i_codec_quirks *quirks;
+
+ quirks = of_device_get_match_data(codec->dev);
+ return snd_soc_add_component_controls(codec,
+ quirks->controls,
+ quirks->num_controls);
+}
+
static const struct snd_soc_component_driver sun4i_codec_codec = {
+ .probe = sun4i_codec_component_driver_probe,
.controls = sun4i_codec_controls,
.num_controls = ARRAY_SIZE(sun4i_codec_controls),
.dapm_widgets = sun4i_codec_codec_dapm_widgets,
@@ -1469,16 +1521,6 @@ static const struct regmap_config sun8i_v3s_codec_regmap_config = {
.max_register = SUN8I_H3_CODEC_ADC_DBG,
};
-struct sun4i_codec_quirks {
- const struct regmap_config *regmap_config;
- const struct snd_soc_component_driver *codec;
- struct snd_soc_card * (*create_card)(struct device *dev);
- struct reg_field reg_adc_fifoc; /* used for regmap_field */
- unsigned int reg_dac_txdata; /* TX FIFO offset for DMA config */
- unsigned int reg_adc_rxdata; /* RX FIFO offset for DMA config */
- bool has_reset;
-};
-
static const struct sun4i_codec_quirks sun4i_codec_quirks = {
.regmap_config = &sun4i_codec_regmap_config,
.codec = &sun4i_codec_codec,
@@ -1486,6 +1528,8 @@ static const struct sun4i_codec_quirks sun4i_codec_quirks = {
.reg_adc_fifoc = REG_FIELD(SUN4I_CODEC_ADC_FIFOC, 0, 31),
.reg_dac_txdata = SUN4I_CODEC_DAC_TXDATA,
.reg_adc_rxdata = SUN4I_CODEC_ADC_RXDATA,
+ .controls = sun4i_codec_extra_controls,
+ .num_controls = ARRAY_SIZE(sun4i_codec_extra_controls),
};
static const struct sun4i_codec_quirks sun6i_a31_codec_quirks = {
@@ -1505,6 +1549,8 @@ static const struct sun4i_codec_quirks sun7i_codec_quirks = {
.reg_adc_fifoc = REG_FIELD(SUN4I_CODEC_ADC_FIFOC, 0, 31),
.reg_dac_txdata = SUN4I_CODEC_DAC_TXDATA,
.reg_adc_rxdata = SUN4I_CODEC_ADC_RXDATA,
+ .controls = sun7i_codec_extra_controls,
+ .num_controls = ARRAY_SIZE(sun7i_codec_extra_controls),
};
static const struct sun4i_codec_quirks sun8i_a23_codec_quirks = {
next prev parent reply other threads:[~2018-05-02 21:18 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-02 21:07 [PATCH v14 0/8] ASoC: sun4i-codec: Add Line-In, FM-In, Mic 2, Capture Source, Differential Line-In Danny Milosavljevic
2018-05-02 21:07 ` [PATCH v14 1/8] ASoC: sun4i-codec: Add MIC2 Pre-Amplifier, Mic2, Mic Playback Volume Danny Milosavljevic
2018-05-03 14:30 ` Maxime Ripard
2018-05-02 21:07 ` Danny Milosavljevic [this message]
2018-05-03 14:33 ` [PATCH v14 2/8] ASoC: sun4i-codec: Add Mic1 Boost Volume, Mic2 Boost Volume Maxime Ripard
2018-05-05 7:05 ` Danny Milosavljevic
2018-05-14 14:05 ` Maxime Ripard
2018-05-02 21:07 ` [PATCH v14 3/8] ASoC: sun4i-codec: Merge sun4i_codec_left_mixer_controls and sun4i_codec_right_mixer_controls into sun4i_codec_mixer_controls Danny Milosavljevic
2018-05-03 14:46 ` Maxime Ripard
2018-05-05 6:51 ` Danny Milosavljevic
2018-05-14 14:06 ` Maxime Ripard
2018-05-02 21:07 ` [PATCH v14 4/8] ASoC: sun4i-codec: Add Mic1 Playback Switch, Mic2 Playback Switch Danny Milosavljevic
2018-05-02 21:07 ` [PATCH v14 5/8] ASoC: sun4i-codec: Add FM Playback Volume, FM Left, FM Right, FM " Danny Milosavljevic
2018-05-02 21:07 ` [PATCH v14 6/8] ASoC: sun4i-codec: Add Line Playback Volume, Line Boost Volume, Line Right, Line Left, Line " Danny Milosavljevic
2018-05-02 21:07 ` [PATCH v14 7/8] ASoC: sun4i-codec: Add Differential Line Source Danny Milosavljevic
2018-05-02 21:08 ` [PATCH v14 8/8] ASoC: sun4i-codec: Add Left Capture Select, Right Capture Select Danny Milosavljevic
2018-05-03 14:54 ` Maxime Ripard
2018-05-05 10:40 ` Danny Milosavljevic
2018-05-14 14:11 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180502210800.1971-3-dannym@scratchpost.org \
--to=dannym@scratchpost.org \
--cc=alsa-devel@alsa-project.org \
--cc=andrea.bondavalli74@gmail.com \
--cc=broonie@kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=icenowy@aosc.xyz \
--cc=kuninori.morimoto.gx@renesas.com \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=maxime.ripard@free-electrons.com \
--cc=p.zabel@pengutronix.de \
--cc=perex@perex.cz \
--cc=tiwai@suse.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome