From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751579AbeEKUga (ORCPT ); Fri, 11 May 2018 16:36:30 -0400 Received: from shards.monkeyblade.net ([184.105.139.130]:50616 "EHLO shards.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750972AbeEKUg3 (ORCPT ); Fri, 11 May 2018 16:36:29 -0400 Date: Fri, 11 May 2018 16:36:28 -0400 (EDT) Message-Id: <20180511.163628.791935735291449158.davem@davemloft.net> To: dmurphy@ti.com Cc: andrew@lunn.ch, f.fainelli@gmail.com, netdev@vger.kernel.org, linux-kernel@vger.kernel.org Subject: Re: [PATCH v3] net: phy: DP83TC811: Introduce support for the DP83TC811 phy From: David Miller In-Reply-To: <20180511180819.5036-1-dmurphy@ti.com> References: <20180511180819.5036-1-dmurphy@ti.com> X-Mailer: Mew version 6.7 on Emacs 25.3 / Mule 6.0 (HANACHIRUSATO) Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Dan Murphy Date: Fri, 11 May 2018 13:08:19 -0500 > Add support for the DP83811 phy. > > The DP83811 supports both rgmii and sgmii interfaces. > There are 2 part numbers for this the DP83TC811R does not > reliably support the SGMII interface but the DP83TC811S will. > > There is not a way to differentiate these parts from the > hardware or register set. So this is controlled via the DT > to indicate which phy mode is required. Or the part can be > strapped to a certain interface. > > Data sheet can be found here: > http://www.ti.com/product/DP83TC811S-Q1/description > http://www.ti.com/product/DP83TC811R-Q1/description > > Signed-off-by: Dan Murphy Applied to net-next, thank you.