From: Salil Mehta <salil.mehta@huawei.com>
To: <davem@davemloft.net>
Cc: <salil.mehta@huawei.com>, <yisen.zhuang@huawei.com>,
<lipeng321@huawei.com>, <mehta.salil@opnsrc.net>,
<netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linuxarm@huawei.com>, Fuyun Liang <liangfuyun1@huawei.com>
Subject: [PATCH net-next 04/10] net: hns3: Change return type of hnae3_register_ae_dev
Date: Tue, 15 May 2018 19:20:08 +0100 [thread overview]
Message-ID: <20180515182014.42196-5-salil.mehta@huawei.com> (raw)
In-Reply-To: <20180515182014.42196-1-salil.mehta@huawei.com>
From: Fuyun Liang <liangfuyun1@huawei.com>
If hclge.ko has not been inserted, the value of ret always is zero
in hnae3_register_ae_dev. If hclge.ko has been inserted, the value
of ret is zero or non zero. Different execution ways have different
results. It is confusing.
The ae_dev which is initialized failed can be reinitialized when we
remove hclge.ko and insert it again. For the case initializing client
instance, it is just like the case initializing ae_dev. The main function
of hnae3_register_ae_dev is adding the ae_dev to ad_dev list. Because
adding ae_dev is always ok, we does not need to return any in this
function.
This patch changes the return type of hnae3_register_ae_dev from int
to void.
Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
---
drivers/net/ethernet/hisilicon/hns3/hnae3.c | 5 +----
drivers/net/ethernet/hisilicon/hns3/hnae3.h | 2 +-
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 4 +---
3 files changed, 3 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.c b/drivers/net/ethernet/hisilicon/hns3/hnae3.c
index 21cb0c5..cb93295 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hnae3.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.c
@@ -203,7 +203,7 @@ EXPORT_SYMBOL(hnae3_unregister_ae_algo);
* @ae_dev: the AE device
* NOTE: the duplicated name will not be checked
*/
-int hnae3_register_ae_dev(struct hnae3_ae_dev *ae_dev)
+void hnae3_register_ae_dev(struct hnae3_ae_dev *ae_dev)
{
const struct pci_device_id *id;
struct hnae3_ae_algo *ae_algo;
@@ -224,7 +224,6 @@ int hnae3_register_ae_dev(struct hnae3_ae_dev *ae_dev)
if (!ae_dev->ops) {
dev_err(&ae_dev->pdev->dev, "ae_dev ops are null\n");
- ret = -EOPNOTSUPP;
goto out_err;
}
@@ -251,8 +250,6 @@ int hnae3_register_ae_dev(struct hnae3_ae_dev *ae_dev)
out_err:
mutex_unlock(&hnae3_common_lock);
-
- return ret;
}
EXPORT_SYMBOL(hnae3_register_ae_dev);
diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.h b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
index ffec231..ea6e6ea 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
@@ -515,7 +515,7 @@ struct hnae3_handle {
#define hnae_get_bit(origin, shift) \
hnae_get_field((origin), (0x1 << (shift)), (shift))
-int hnae3_register_ae_dev(struct hnae3_ae_dev *ae_dev);
+void hnae3_register_ae_dev(struct hnae3_ae_dev *ae_dev);
void hnae3_unregister_ae_dev(struct hnae3_ae_dev *ae_dev);
void hnae3_unregister_ae_algo(struct hnae3_ae_algo *ae_algo);
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index af9e90f..ac75b5d 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -1576,9 +1576,7 @@ static int hns3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
ae_dev->dev_type = HNAE3_DEV_KNIC;
pci_set_drvdata(pdev, ae_dev);
- ret = hnae3_register_ae_dev(ae_dev);
- if (ret)
- return ret;
+ hnae3_register_ae_dev(ae_dev);
if (hns3_is_phys_func(pdev) && IS_ENABLED(CONFIG_PCI_IOV))
hns3_enable_sriov(pdev);
--
2.7.4
next prev parent reply other threads:[~2018-05-15 18:24 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-15 18:20 [PATCH net-next 00/10] Misc. Bug Fixes and clean-ups for HNS3 Driver Salil Mehta
2018-05-15 18:20 ` [PATCH net-next 01/10] net: hns3: Fix for deadlock problem occurring when unregistering ae_algo Salil Mehta
2018-05-15 18:20 ` [PATCH net-next 02/10] net: hns3: Fix for the null pointer problem occurring when initializing ae_dev failed Salil Mehta
2018-05-15 18:20 ` [PATCH net-next 03/10] net: hns3: Add a check for client instance init state Salil Mehta
2018-05-15 18:20 ` Salil Mehta [this message]
2018-05-15 18:20 ` [PATCH net-next 05/10] net: hns3: Change return type of hnae3_register_ae_algo Salil Mehta
2018-05-15 18:20 ` [PATCH net-next 06/10] net: hns3: Change return value in hnae3_register_client Salil Mehta
2018-05-15 18:20 ` [PATCH net-next 07/10] net: hns3: Fixes the back pressure setting When sriov is enabled Salil Mehta
2018-05-15 18:20 ` [PATCH net-next 08/10] net: hns3: Fix for fiber link up problem Salil Mehta
2018-05-15 18:20 ` [PATCH net-next 09/10] net: hns3: Add support of .sriov_configure in HNS3 driver Salil Mehta
2018-05-16 19:47 ` kbuild test robot
2018-05-16 19:47 ` [RFC PATCH] net: hns3: hns3_pci_sriov_configure() can be static kbuild test robot
2018-05-15 18:20 ` [PATCH net-next 10/10] net: hns3: Fixes the missing PCI iounmap for various legs Salil Mehta
2018-05-16 15:33 ` [PATCH net-next 00/10] Misc. Bug Fixes and clean-ups for HNS3 Driver David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180515182014.42196-5-salil.mehta@huawei.com \
--to=salil.mehta@huawei.com \
--cc=davem@davemloft.net \
--cc=liangfuyun1@huawei.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=lipeng321@huawei.com \
--cc=mehta.salil@opnsrc.net \
--cc=netdev@vger.kernel.org \
--cc=yisen.zhuang@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®