From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751892AbeEQFuq (ORCPT ); Thu, 17 May 2018 01:50:46 -0400 Received: from metis.ext.pengutronix.de ([85.220.165.71]:53011 "EHLO metis.ext.pengutronix.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751520AbeEQFum (ORCPT ); Thu, 17 May 2018 01:50:42 -0400 From: Oleksij Rempel To: Shawn Guo , Mark Brown , "Rafael J. Wysocki" Cc: Oleksij Rempel , kernel@pengutronix.de, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org, Andrew Morton , Liam Girdwood , Leonard Crestez , Rob Herring , Mark Rutland , Michael Turquette , Stephen Boyd , Fabio Estevam , Russell King Subject: [PATCH v7 4/6] regulator: pfuze100: add fsl,pmic-stby-poweroff property Date: Thu, 17 May 2018 07:50:12 +0200 Message-Id: <20180517055014.6607-5-o.rempel@pengutronix.de> X-Mailer: git-send-email 2.17.0 In-Reply-To: <20180517055014.6607-1-o.rempel@pengutronix.de> References: <20180517055014.6607-1-o.rempel@pengutronix.de> X-SA-Exim-Connect-IP: 2001:67c:670:100:1d::7 X-SA-Exim-Mail-From: ore@pengutronix.de X-SA-Exim-Scanned: No (on metis.ext.pengutronix.de); SAEximRunCond expanded to false X-PTX-Original-Recipient: linux-kernel@vger.kernel.org Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Document the new optional "fsl,pmic-stby-poweroff" property. Signed-off-by: Oleksij Rempel Acked-by: Rob Herring --- Documentation/devicetree/bindings/regulator/pfuze100.txt | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.txt b/Documentation/devicetree/bindings/regulator/pfuze100.txt index c6dd3f5e485b..91fec1a0785d 100644 --- a/Documentation/devicetree/bindings/regulator/pfuze100.txt +++ b/Documentation/devicetree/bindings/regulator/pfuze100.txt @@ -4,6 +4,13 @@ Required properties: - compatible: "fsl,pfuze100", "fsl,pfuze200", "fsl,pfuze3000" - reg: I2C slave address +Optional properties: +- fsl,pmic-stby-poweroff: if present, configure the PMIC to shutdown all + power rails when PMIC_STBY_REQ line is asserted during the power off sequence. + Use this option if the SoC should be powered off by external power + management IC (PMIC) on PMIC_STBY_REQ signal. + As opposite to PMIC_STBY_REQ boards can implement PMIC_ON_REQ signal. + Required child node: - regulators: This is the list of child nodes that specify the regulator initialization data for defined regulators. Please refer to below doc -- 2.17.0