From: Antoine Tenart <antoine.tenart@bootlin.com>
To: davem@davemloft.net
Cc: Yan Markman <ymarkman@marvell.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
thomas.petazzoni@bootlin.com, maxime.chevallier@bootlin.com,
gregory.clement@bootlin.com, miquel.raynal@bootlin.com,
nadavh@marvell.com, stefanc@marvell.com, mw@semihalf.com,
Antoine Tenart <antoine.tenart@bootlin.com>
Subject: [PATCH net-next 2/3] net: mvpp2: set mac address does not require the stop/start sequence
Date: Thu, 17 May 2018 10:34:26 +0200 [thread overview]
Message-ID: <20180517083427.15793-3-antoine.tenart@bootlin.com> (raw)
In-Reply-To: <20180517083427.15793-1-antoine.tenart@bootlin.com>
From: Yan Markman <ymarkman@marvell.com>
Remove special stop/start handling from the set_mac_address callback.
All this special care is not needed, and can be removed. It also
simplifies the up/down status in the driver and helps avoiding possible
link status mismatch issues.
Signed-off-by: Yan Markman <ymarkman@marvell.com>
[Antoine: commit message]
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
---
drivers/net/ethernet/marvell/mvpp2.c | 38 +++++-----------------------
1 file changed, 7 insertions(+), 31 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvpp2.c b/drivers/net/ethernet/marvell/mvpp2.c
index 73b2f2d331c5..a9483da18e00 100644
--- a/drivers/net/ethernet/marvell/mvpp2.c
+++ b/drivers/net/ethernet/marvell/mvpp2.c
@@ -7358,42 +7358,18 @@ static void mvpp2_set_rx_mode(struct net_device *dev)
static int mvpp2_set_mac_address(struct net_device *dev, void *p)
{
- struct mvpp2_port *port = netdev_priv(dev);
const struct sockaddr *addr = p;
int err;
- if (!is_valid_ether_addr(addr->sa_data)) {
- err = -EADDRNOTAVAIL;
- goto log_error;
- }
-
- if (!netif_running(dev)) {
- err = mvpp2_prs_update_mac_da(dev, addr->sa_data);
- if (!err)
- return 0;
- /* Reconfigure parser to accept the original MAC address */
- err = mvpp2_prs_update_mac_da(dev, dev->dev_addr);
- if (err)
- goto log_error;
- }
-
- mvpp2_stop_dev(port);
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
err = mvpp2_prs_update_mac_da(dev, addr->sa_data);
- if (!err)
- goto out_start;
-
- /* Reconfigure parser accept the original MAC address */
- err = mvpp2_prs_update_mac_da(dev, dev->dev_addr);
- if (err)
- goto log_error;
-out_start:
- mvpp2_start_dev(port);
- mvpp2_egress_enable(port);
- mvpp2_ingress_enable(port);
- return 0;
-log_error:
- netdev_err(dev, "failed to change MAC address\n");
+ if (err) {
+ /* Reconfigure parser accept the original MAC address */
+ mvpp2_prs_update_mac_da(dev, dev->dev_addr);
+ netdev_err(dev, "failed to change MAC address\n");
+ }
return err;
}
--
2.17.0
next prev parent reply other threads:[~2018-05-17 8:35 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-17 8:34 [PATCH net-next 0/3] net: mvpp2: small improvements Antoine Tenart
2018-05-17 8:34 ` [PATCH net-next 1/3] net: mvpp2: avoid checking for free aggregated descriptors twice Antoine Tenart
2018-05-17 20:19 ` David Miller
2018-05-17 8:34 ` Antoine Tenart [this message]
2018-05-17 20:19 ` [PATCH net-next 2/3] net: mvpp2: set mac address does not require the stop/start sequence David Miller
2018-05-17 8:34 ` [PATCH net-next 3/3] net: mvpp2: print rx error with rate-limit Antoine Tenart
2018-05-17 20:19 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180517083427.15793-3-antoine.tenart@bootlin.com \
--to=antoine.tenart@bootlin.com \
--cc=davem@davemloft.net \
--cc=gregory.clement@bootlin.com \
--cc=linux-kernel@vger.kernel.org \
--cc=maxime.chevallier@bootlin.com \
--cc=miquel.raynal@bootlin.com \
--cc=mw@semihalf.com \
--cc=nadavh@marvell.com \
--cc=netdev@vger.kernel.org \
--cc=stefanc@marvell.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=ymarkman@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®