From: Janusz Krzysztofik <jmkrzyszt@gmail.com>
To: Tony Lindgren <tony@atomide.com>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Boris Brezillon <boris.brezillon@bootlin.com>,
Tomi Valkeinen <tomi.valkeinen@ti.com>,
Mark Brown <broonie@kernel.org>
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>,
Richard Weinberger <richard@nod.at>,
Peter Ujfalusi <peter.ujfalusi@ti.com>,
Jarkko Nikula <jarkko.nikula@bitmer.com>,
Liam Girdwood <lgirdwood@gmail.com>,
linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-input@vger.kernel.org,
linux-mtd@lists.infradead.org, linux-fbdev@vger.kernel.org,
alsa-devel@alsa-project.org,
Janusz Krzysztofik <jmkrzyszt@gmail.com>
Subject: [PATCH 5/6] mtd: rawnand: ams-delta: use GPIO lookup table
Date: Fri, 18 May 2018 23:09:53 +0200 [thread overview]
Message-ID: <20180518210954.29044-5-jmkrzyszt@gmail.com> (raw)
In-Reply-To: <20180518210954.29044-1-jmkrzyszt@gmail.com>
Now as the Amstrad Delta board provides GPIO lookup tables, switch from
GPIO numbers to GPIO descriptors and use the table to locate required
GPIO pins.
Declare static variables for storing GPIO descriptors and replace
gpio_ functions with their gpiod_ equivalents. Return -EPROBE_DEFER
if the GPIO pins are not yet available so device initialization is
postponed instead of aborted.
Pin naming used by the driver should be followed while respective GPIO
lookup table is initialized by a board init code.
Created and tested against linux-4.17-rc3, on top of patch 1/6 "ARM:
OMAP1: ams-delta: add GPIO lookup tables"
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
---
drivers/mtd/nand/raw/ams-delta.c | 110 +++++++++++++++++++++------------------
1 file changed, 58 insertions(+), 52 deletions(-)
diff --git a/drivers/mtd/nand/raw/ams-delta.c b/drivers/mtd/nand/raw/ams-delta.c
index 37a3cc21c7bc..c44be2f5a65c 100644
--- a/drivers/mtd/nand/raw/ams-delta.c
+++ b/drivers/mtd/nand/raw/ams-delta.c
@@ -20,23 +20,28 @@
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
-#include <linux/gpio.h>
#include <linux/platform_data/gpio-omap.h>
#include <asm/io.h>
#include <asm/sizes.h>
-#include <mach/board-ams-delta.h>
-
#include <mach/hardware.h>
/*
* MTD structure for E3 (Delta)
*/
static struct mtd_info *ams_delta_mtd = NULL;
+static struct gpio_desc *gpiod_rdy;
+static struct gpio_desc *gpiod_nce;
+static struct gpio_desc *gpiod_nre;
+static struct gpio_desc *gpiod_nwp;
+static struct gpio_desc *gpiod_nwe;
+static struct gpio_desc *gpiod_ale;
+static struct gpio_desc *gpiod_cle;
/*
* Define partitions for flash devices
@@ -70,9 +75,9 @@ static void ams_delta_write_byte(struct mtd_info *mtd, u_char byte)
writew(0, io_base + OMAP_MPUIO_IO_CNTL);
writew(byte, this->IO_ADDR_W);
- gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NWE, 0);
+ gpiod_set_value(gpiod_nwe, 0);
ndelay(40);
- gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NWE, 1);
+ gpiod_set_value(gpiod_nwe, 1);
}
static u_char ams_delta_read_byte(struct mtd_info *mtd)
@@ -81,11 +86,11 @@ static u_char ams_delta_read_byte(struct mtd_info *mtd)
struct nand_chip *this = mtd_to_nand(mtd);
void __iomem *io_base = (void __iomem *)nand_get_controller_data(this);
- gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NRE, 0);
+ gpiod_set_value(gpiod_nre, 0);
ndelay(40);
writew(~0, io_base + OMAP_MPUIO_IO_CNTL);
res = readw(this->IO_ADDR_R);
- gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NRE, 1);
+ gpiod_set_value(gpiod_nre, 1);
return res;
}
@@ -120,12 +125,9 @@ static void ams_delta_hwcontrol(struct mtd_info *mtd, int cmd,
{
if (ctrl & NAND_CTRL_CHANGE) {
- gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NCE,
- (ctrl & NAND_NCE) == 0);
- gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_CLE,
- (ctrl & NAND_CLE) != 0);
- gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_ALE,
- (ctrl & NAND_ALE) != 0);
+ gpiod_set_value(gpiod_nce, !(ctrl & NAND_NCE));
+ gpiod_set_value(gpiod_cle, !!(ctrl & NAND_CLE));
+ gpiod_set_value(gpiod_ale, !!(ctrl & NAND_ALE));
}
if (cmd != NAND_CMD_NONE)
@@ -134,41 +136,9 @@ static void ams_delta_hwcontrol(struct mtd_info *mtd, int cmd,
static int ams_delta_nand_ready(struct mtd_info *mtd)
{
- return gpio_get_value(AMS_DELTA_GPIO_PIN_NAND_RB);
+ return gpiod_get_value(gpiod_rdy);
}
-static const struct gpio _mandatory_gpio[] = {
- {
- .gpio = AMS_DELTA_GPIO_PIN_NAND_NCE,
- .flags = GPIOF_OUT_INIT_HIGH,
- .label = "nand_nce",
- },
- {
- .gpio = AMS_DELTA_GPIO_PIN_NAND_NRE,
- .flags = GPIOF_OUT_INIT_HIGH,
- .label = "nand_nre",
- },
- {
- .gpio = AMS_DELTA_GPIO_PIN_NAND_NWP,
- .flags = GPIOF_OUT_INIT_HIGH,
- .label = "nand_nwp",
- },
- {
- .gpio = AMS_DELTA_GPIO_PIN_NAND_NWE,
- .flags = GPIOF_OUT_INIT_HIGH,
- .label = "nand_nwe",
- },
- {
- .gpio = AMS_DELTA_GPIO_PIN_NAND_ALE,
- .flags = GPIOF_OUT_INIT_LOW,
- .label = "nand_ale",
- },
- {
- .gpio = AMS_DELTA_GPIO_PIN_NAND_CLE,
- .flags = GPIOF_OUT_INIT_LOW,
- .label = "nand_cle",
- },
-};
/*
* Main initialization routine
@@ -216,12 +186,15 @@ static int ams_delta_init(struct platform_device *pdev)
this->write_buf = ams_delta_write_buf;
this->read_buf = ams_delta_read_buf;
this->cmd_ctrl = ams_delta_hwcontrol;
- if (gpio_request(AMS_DELTA_GPIO_PIN_NAND_RB, "nand_rdy") == 0) {
+
+ gpiod_rdy = devm_gpiod_get_optional(&pdev->dev, "rdy", GPIOD_IN);
+ if (!IS_ERR_OR_NULL(gpiod_rdy)) {
this->dev_ready = ams_delta_nand_ready;
} else {
this->dev_ready = NULL;
pr_notice("Couldn't request gpio for Delta NAND ready.\n");
}
+
/* 25 us command delay time */
this->chip_delay = 30;
this->ecc.mode = NAND_ECC_SOFT;
@@ -230,7 +203,44 @@ static int ams_delta_init(struct platform_device *pdev)
platform_set_drvdata(pdev, io_base);
/* Set chip enabled, but */
- err = gpio_request_array(_mandatory_gpio, ARRAY_SIZE(_mandatory_gpio));
+ gpiod_nwp = devm_gpiod_get(&pdev->dev, "nwp", GPIOD_OUT_HIGH);
+ if (IS_ERR(gpiod_nwp)) {
+ err = PTR_ERR(gpiod_nwp);
+ dev_err(&pdev->dev, "NWP GPIO request failed (%d)\n", err);
+ goto err_gpiod;
+ }
+ gpiod_nce = devm_gpiod_get(&pdev->dev, "nce", GPIOD_OUT_HIGH);
+ if (IS_ERR(gpiod_nce)) {
+ err = PTR_ERR(gpiod_nce);
+ dev_err(&pdev->dev, "NCE GPIO request failed (%d)\n", err);
+ goto err_gpiod;
+ }
+ gpiod_nre = devm_gpiod_get(&pdev->dev, "nre", GPIOD_OUT_HIGH);
+ if (IS_ERR(gpiod_nre)) {
+ err = PTR_ERR(gpiod_nre);
+ dev_err(&pdev->dev, "NRE GPIO request failed (%d)\n", err);
+ goto err_gpiod;
+ }
+ gpiod_nwe = devm_gpiod_get(&pdev->dev, "nwe", GPIOD_OUT_HIGH);
+ if (IS_ERR(gpiod_nwe)) {
+ err = PTR_ERR(gpiod_nwe);
+ dev_err(&pdev->dev, "NWE GPIO request failed (%d)\n", err);
+ goto err_gpiod;
+ }
+ gpiod_ale = devm_gpiod_get(&pdev->dev, "ale", GPIOD_OUT_LOW);
+ if (IS_ERR(gpiod_ale)) {
+ err = PTR_ERR(gpiod_ale);
+ dev_err(&pdev->dev, "ALE GPIO request failed (%d)\n", err);
+ goto err_gpiod;
+ }
+ gpiod_cle = devm_gpiod_get(&pdev->dev, "cle", GPIOD_OUT_LOW);
+ if (IS_ERR(gpiod_cle)) {
+ err = PTR_ERR(gpiod_cle);
+ dev_err(&pdev->dev, "CLE GPIO request failed (%d)\n", err);
+ }
+err_gpiod:
+ if (err == -ENODEV || err == -ENOENT)
+ err = -EPROBE_DEFER;
if (err)
goto out_gpio;
@@ -246,9 +256,7 @@ static int ams_delta_init(struct platform_device *pdev)
goto out;
out_mtd:
- gpio_free_array(_mandatory_gpio, ARRAY_SIZE(_mandatory_gpio));
out_gpio:
- gpio_free(AMS_DELTA_GPIO_PIN_NAND_RB);
iounmap(io_base);
out_free:
kfree(this);
@@ -266,8 +274,6 @@ static int ams_delta_cleanup(struct platform_device *pdev)
/* Release resources, unregister device */
nand_release(ams_delta_mtd);
- gpio_free_array(_mandatory_gpio, ARRAY_SIZE(_mandatory_gpio));
- gpio_free(AMS_DELTA_GPIO_PIN_NAND_RB);
iounmap(io_base);
/* Free the MTD device structure */
--
2.16.1
next prev parent reply other threads:[~2018-05-18 21:10 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-18 21:09 [PATCH 1/6] ARM: OMAP1: ams-delta: add GPIO lookup tables Janusz Krzysztofik
2018-05-18 21:09 ` [PATCH 2/6] Input: ams_delta_serio: use GPIO lookup table Janusz Krzysztofik
2018-05-20 20:17 ` Dmitry Torokhov
2018-05-18 21:09 ` [PATCH 3/6] ASoC: ams_delta: " Janusz Krzysztofik
2018-05-21 10:05 ` Mark Brown
2018-05-23 18:52 ` Tony Lindgren
2018-05-24 20:35 ` Janusz Krzysztofik
2018-05-18 21:09 ` [PATCH 4/6] fbdev: omapfb: lcd_ams_delta: " Janusz Krzysztofik
2018-05-25 22:49 ` [Resend] " Janusz Krzysztofik
2018-07-09 19:16 ` [PATCH v2] video: " Janusz Krzysztofik
2018-07-17 16:54 ` [PATCH RESEND " Janusz Krzysztofik
2018-07-17 21:40 ` Janusz Krzysztofik
2018-05-18 21:09 ` Janusz Krzysztofik [this message]
2018-05-18 21:21 ` [PATCH 5/6] mtd: rawnand: ams-delta: " Andy Shevchenko
2018-05-18 23:15 ` Janusz Krzysztofik
2018-05-19 18:00 ` Andy Shevchenko
2018-05-19 21:55 ` Janusz Krzysztofik
2018-05-20 14:44 ` Andy Shevchenko
2018-05-20 15:37 ` Janusz Krzysztofik
2018-05-20 16:17 ` Andy Shevchenko
2018-05-20 17:25 ` Miquel Raynal
2018-05-21 6:44 ` Andy Shevchenko
2018-05-25 22:20 ` [PATCH 5/6 v2] " Janusz Krzysztofik
2018-05-30 9:05 ` Boris Brezillon
2018-05-30 17:43 ` Janusz Krzysztofik
2018-05-30 17:52 ` Boris Brezillon
2018-05-30 20:39 ` Janusz Krzysztofik
2018-06-04 9:55 ` Boris Brezillon
2018-06-04 16:48 ` Janusz Krzysztofik
2018-06-04 23:09 ` Boris Brezillon
2018-06-04 23:30 ` Boris Brezillon
2018-07-09 19:38 ` [PATCH v3] " Janusz Krzysztofik
2018-07-17 17:05 ` [PATCH RESEND " Janusz Krzysztofik
2018-07-17 20:31 ` Boris Brezillon
2018-07-17 19:37 ` [PATCH " Boris Brezillon
2018-07-17 20:20 ` Janusz Krzysztofik
2018-07-17 20:22 ` Boris Brezillon
2018-05-20 19:27 ` [alsa-devel] [PATCH 5/6] " Ladislav Michl
2018-05-20 20:08 ` Dmitry Torokhov
2018-05-21 20:21 ` Janusz Krzysztofik
2018-05-21 20:57 ` Dmitry Torokhov
2018-05-18 21:09 ` [PATCH 6/6] ARM: OMAP1: ams-delta: make board header file local to mach-omap1 Janusz Krzysztofik
2018-05-21 17:35 ` [PATCH 1/6] ARM: OMAP1: ams-delta: add GPIO lookup tables Tony Lindgren
2018-05-21 18:10 ` Janusz Krzysztofik
2018-07-17 23:14 ` [PATCH v2 0/3] ARM: OMAP1: ams-delta: Complete driver gpiod migration Janusz Krzysztofik
2018-07-17 23:14 ` [PATCH v2 1/3 v2] video: fbdev: omapfb: lcd_ams_delta: use GPIO lookup table Janusz Krzysztofik
2018-07-17 23:14 ` [PATCH v2 2/3 v4] mtd: rawnand: ams-delta: " Janusz Krzysztofik
2018-07-18 7:20 ` Miquel Raynal
2018-07-19 6:39 ` Tony Lindgren
2018-07-17 23:14 ` [PATCH v2 3/3] ARM: OMAP1: ams-delta: make board header file local to mach-omap1 Janusz Krzysztofik
2018-07-18 14:18 ` [PATCH v2 0/3] ARM: OMAP1: ams-delta: Complete driver gpiod migration Gregory CLEMENT
2018-09-09 22:56 ` [PATCH v3 " Janusz Krzysztofik
2018-09-09 22:56 ` [PATCH v3 1/3] video: fbdev: omapfb: lcd_ams_delta: use GPIO lookup table Janusz Krzysztofik
2018-09-10 7:15 ` Linus Walleij
2018-10-03 13:03 ` [PATCH v4] " Janusz Krzysztofik
2018-10-08 10:50 ` Bartlomiej Zolnierkiewicz
2018-09-09 22:56 ` [PATCH v3 2/3] mtd: rawnand: ams-delta: " Janusz Krzysztofik
2018-09-19 22:17 ` [PATCH v5] " Janusz Krzysztofik
2018-09-20 15:33 ` Linus Walleij
2018-09-23 11:35 ` Miquel Raynal
2018-09-09 22:56 ` [PATCH v3 3/3] ARM: OMAP1: ams-delta: make board header file local to mach-omap1 Janusz Krzysztofik
2018-09-19 18:10 ` [PATCH v3 0/3] ARM: OMAP1: ams-delta: Complete driver gpiod migration Janusz Krzysztofik
2018-09-20 20:58 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180518210954.29044-5-jmkrzyszt@gmail.com \
--to=jmkrzyszt@gmail.com \
--cc=aaro.koskinen@iki.fi \
--cc=alsa-devel@alsa-project.org \
--cc=boris.brezillon@bootlin.com \
--cc=broonie@kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=jarkko.nikula@bitmer.com \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=peter.ujfalusi@ti.com \
--cc=richard@nod.at \
--cc=tomi.valkeinen@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®