mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Laura Abbott <labbott@redhat.com>
To: Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will.deacon@arm.com>,
	Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Laura Abbott <labbott@redhat.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Kees Cook <keescook@chromium.org>,
	Peter Robinson <pbrobinson@gmail.com>
Subject: [PATCH] arm64: Make sure permission updates happen for pmd/pud
Date: Tue, 22 May 2018 16:50:49 -0700	[thread overview]
Message-ID: <20180522235049.23400-1-labbott@redhat.com> (raw)

Commit 15122ee2c515 ("arm64: Enforce BBM for huge IO/VMAP mappings")
disallowed block mappings for ioremap since that code does not honor
break-before-make. The same APIs are also used for permission updating
though and the extra checks prevent the permission updates from happening,
even though this should be permitted. This results in read-only permissions
not being fully applied. Visibly, this can occasionaly be seen as a failure
on the built in rodata test when the test data ends up in a section or
as an odd RW gap on the page table dump. Fix this by keeping the check
for the top level p*d_set_huge APIs but using separate functions for the
update APIs.

Reported-by: Peter Robinson <pbrobinson@gmail.com>
Fixes: 15122ee2c515 ("arm64: Enforce BBM for huge IO/VMAP mappings")
Signed-off-by: Laura Abbott <labbott@redhat.com>
---
 arch/arm64/mm/mmu.c | 28 ++++++++++++++++++++--------
 1 file changed, 20 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c
index 2dbb2c9f1ec1..57517ad86910 100644
--- a/arch/arm64/mm/mmu.c
+++ b/arch/arm64/mm/mmu.c
@@ -66,6 +66,9 @@ static pte_t bm_pte[PTRS_PER_PTE] __page_aligned_bss;
 static pmd_t bm_pmd[PTRS_PER_PMD] __page_aligned_bss __maybe_unused;
 static pud_t bm_pud[PTRS_PER_PUD] __page_aligned_bss __maybe_unused;
 
+static void __pmd_set_huge(pmd_t *pmdp, phys_addr_t phys, pgprot_t prot);
+static void __pud_set_huge(pud_t *pudp, phys_addr_t phys, pgprot_t prot);
+
 pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
 			      unsigned long size, pgprot_t vma_prot)
 {
@@ -200,7 +203,7 @@ static void init_pmd(pud_t *pudp, unsigned long addr, unsigned long end,
 		/* try section mapping first */
 		if (((addr | next | phys) & ~SECTION_MASK) == 0 &&
 		    (flags & NO_BLOCK_MAPPINGS) == 0) {
-			pmd_set_huge(pmdp, phys, prot);
+			__pmd_set_huge(pmdp, phys, prot);
 
 			/*
 			 * After the PMD entry has been populated once, we
@@ -299,7 +302,7 @@ static void alloc_init_pud(pgd_t *pgdp, unsigned long addr, unsigned long end,
 		 */
 		if (use_1G_block(addr, next, phys) &&
 		    (flags & NO_BLOCK_MAPPINGS) == 0) {
-			pud_set_huge(pudp, phys, prot);
+			__pud_set_huge(pudp, phys, prot);
 
 			/*
 			 * After the PUD entry has been populated once, we
@@ -929,31 +932,40 @@ int __init arch_ioremap_pmd_supported(void)
 	return 1;
 }
 
-int pud_set_huge(pud_t *pudp, phys_addr_t phys, pgprot_t prot)
+void __pud_set_huge(pud_t *pudp, phys_addr_t phys, pgprot_t prot)
 {
 	pgprot_t sect_prot = __pgprot(PUD_TYPE_SECT |
 					pgprot_val(mk_sect_prot(prot)));
 
+	BUG_ON(phys & ~PUD_MASK);
+	set_pud(pudp, pfn_pud(__phys_to_pfn(phys), sect_prot));
+}
+
+int pud_set_huge(pud_t *pudp, phys_addr_t phys, pgprot_t prot)
+{
 	/* ioremap_page_range doesn't honour BBM */
 	if (pud_present(READ_ONCE(*pudp)))
 		return 0;
 
-	BUG_ON(phys & ~PUD_MASK);
-	set_pud(pudp, pfn_pud(__phys_to_pfn(phys), sect_prot));
+	__pud_set_huge(pudp, phys, prot);
 	return 1;
 }
 
-int pmd_set_huge(pmd_t *pmdp, phys_addr_t phys, pgprot_t prot)
+static void __pmd_set_huge(pmd_t *pmdp, phys_addr_t phys, pgprot_t prot)
 {
 	pgprot_t sect_prot = __pgprot(PMD_TYPE_SECT |
 					pgprot_val(mk_sect_prot(prot)));
+	BUG_ON(phys & ~PMD_MASK);
+	set_pmd(pmdp, pfn_pmd(__phys_to_pfn(phys), sect_prot));
+}
 
+int pmd_set_huge(pmd_t *pmdp, phys_addr_t phys, pgprot_t prot)
+{
 	/* ioremap_page_range doesn't honour BBM */
 	if (pmd_present(READ_ONCE(*pmdp)))
 		return 0;
 
-	BUG_ON(phys & ~PMD_MASK);
-	set_pmd(pmdp, pfn_pmd(__phys_to_pfn(phys), sect_prot));
+	__pmd_set_huge(pmdp, phys, prot);
 	return 1;
 }
 
-- 
2.17.0

             reply	other threads:[~2018-05-22 23:51 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-22 23:50 Laura Abbott [this message]
2018-05-23 10:51 ` Will Deacon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180522235049.23400-1-labbott@redhat.com \
    --to=labbott@redhat.com \
    --cc=ard.biesheuvel@linaro.org \
    --cc=catalin.marinas@arm.com \
    --cc=keescook@chromium.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pbrobinson@gmail.com \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome