From: Arnd Bergmann <arnd@arndb.de>
To: Jonathan Corbet <corbet@lwn.net>,
Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>,
Philippe Ombredanne <pombredanne@nexb.com>,
Bhumika Goyal <bhumirks@gmail.com>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
Hans Verkuil <hans.verkuil@cisco.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-media@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 4/5] media: marvel-ccic: allow ccic and mmp drivers to coexist
Date: Fri, 25 May 2018 17:25:11 +0200 [thread overview]
Message-ID: <20180525152523.2821369-4-arnd@arndb.de> (raw)
In-Reply-To: <20180525152523.2821369-1-arnd@arndb.de>
Randconfig builds fail when one of the two is a built-in driver and
the other one is a loadable module:
drivers/media/platform/marvell-ccic/mcam-core.o: In function `mccic_register':
mcam-core.c:(.text+0x2594): undefined reference to `__this_module'
drivers/media/platform/marvell-ccic/mcam-core.o:(.rodata+0x50): undefined reference to `__this_module'
The problem is that mcam-core.c can not be built both ways at the smae
time. However, we can make kbuild take care of that by making the core
driver a separate module, which can be either built-in or loadable
as needed.
Making it a separate module requires exporting a few symbols and
adding the module license from the header.
Fixes: 0a9c643c8faa ("media: marvel-ccic: re-enable mmp-driver build")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/media/platform/marvell-ccic/Makefile | 9 ++++-----
drivers/media/platform/marvell-ccic/mcam-core.c | 9 ++++++++-
2 files changed, 12 insertions(+), 6 deletions(-)
diff --git a/drivers/media/platform/marvell-ccic/Makefile b/drivers/media/platform/marvell-ccic/Makefile
index 05a792c579a2..b3a4d0cdccb8 100644
--- a/drivers/media/platform/marvell-ccic/Makefile
+++ b/drivers/media/platform/marvell-ccic/Makefile
@@ -1,6 +1,5 @@
-obj-$(CONFIG_VIDEO_CAFE_CCIC) += cafe_ccic.o
-cafe_ccic-y := cafe-driver.o mcam-core.o
-
-obj-$(CONFIG_VIDEO_MMP_CAMERA) += mmp_camera.o
-mmp_camera-y := mmp-driver.o mcam-core.o
+obj-$(CONFIG_VIDEO_CAFE_CCIC) += cafe_ccic.o mcam-core.o
+cafe_ccic-y := cafe-driver.o
+obj-$(CONFIG_VIDEO_MMP_CAMERA) += mmp_camera.o mcam-core.o
+mmp_camera-y := mmp-driver.o
diff --git a/drivers/media/platform/marvell-ccic/mcam-core.c b/drivers/media/platform/marvell-ccic/mcam-core.c
index 80670eeee142..dfdbd4354b74 100644
--- a/drivers/media/platform/marvell-ccic/mcam-core.c
+++ b/drivers/media/platform/marvell-ccic/mcam-core.c
@@ -1720,6 +1720,7 @@ int mccic_irq(struct mcam_camera *cam, unsigned int irqs)
}
return handled;
}
+EXPORT_SYMBOL_GPL(mccic_irq);
/* ---------------------------------------------------------------------- */
/*
@@ -1830,7 +1831,7 @@ int mccic_register(struct mcam_camera *cam)
v4l2_device_unregister(&cam->v4l2_dev);
return ret;
}
-
+EXPORT_SYMBOL_GPL(mccic_register);
void mccic_shutdown(struct mcam_camera *cam)
{
@@ -1850,6 +1851,7 @@ void mccic_shutdown(struct mcam_camera *cam)
v4l2_ctrl_handler_free(&cam->ctrl_handler);
v4l2_device_unregister(&cam->v4l2_dev);
}
+EXPORT_SYMBOL_GPL(mccic_shutdown);
/*
* Power management
@@ -1868,6 +1870,7 @@ void mccic_suspend(struct mcam_camera *cam)
}
mutex_unlock(&cam->s_mutex);
}
+EXPORT_SYMBOL_GPL(mccic_suspend);
int mccic_resume(struct mcam_camera *cam)
{
@@ -1898,4 +1901,8 @@ int mccic_resume(struct mcam_camera *cam)
}
return ret;
}
+EXPORT_SYMBOL_GPL(mccic_resume);
#endif /* CONFIG_PM */
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Jonathan Corbet <corbet@lwn.net>");
--
2.9.0
next prev parent reply other threads:[~2018-05-25 15:26 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-25 15:25 [PATCH 1/5] media: omap3isp: fix warning for !CONFIG_PM Arnd Bergmann
2018-05-25 15:25 ` [PATCH 2/5] media: v4l: cadence: include linux/slab.h Arnd Bergmann
2018-05-28 6:56 ` Maxime Ripard
2018-05-25 15:25 ` [PATCH 3/5] media: cx231xx: fix RC_CORE dependency Arnd Bergmann
2018-05-25 15:25 ` Arnd Bergmann [this message]
2018-05-25 15:25 ` [PATCH 5/5] media: omap2: fix compile-testing with FB_OMAP2=m Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180525152523.2821369-4-arnd@arndb.de \
--to=arnd@arndb.de \
--cc=bhumirks@gmail.com \
--cc=corbet@lwn.net \
--cc=gregkh@linuxfoundation.org \
--cc=hans.verkuil@cisco.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=pombredanne@nexb.com \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®