mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
To: "David E. Box" <david.e.box@linux.intel.com>
Cc: vishwanath.somayaji@intel.com, dvhart@infradead.org,
	andy@infradead.org, kyle.d.pelton@linux.intel.com,
	platform-driver-x86@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH V4] platform/x86: intel_pmc_core: Add CNP SLPS0 debug registers
Date: Fri, 15 Jun 2018 16:57:01 +0530	[thread overview]
Message-ID: <20180615112700.GA20210@raj-desk2.iind.intel.com> (raw)
In-Reply-To: <20180614221302.25663-1-david.e.box@linux.intel.com>

On Thu, Jun 14, 2018 at 03:13:02PM -0700, David E. Box wrote:
> From: <david.e.box@intel.com>
> 
> Adds debugfs access to registers in the Cannonlake PCH PMC that are
> useful for debugging #SLP_S0 signal assertion and other low power
> related activities. Device pm states are latched in these registers
> whenever the package enters C10 and can be read from slp_s0_debug_status.
> The pm states may also be latched by writing 1 to slp_s0_debug_latch
> which will immediately capture the current state on the next read of
> slp_s0_debug_status.

Reviewed-and-tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>

> 
> Signed-off-by: Box, David E <david.e.box@intel.com>
> ---
> V4:
> 	- rename slp_s0_dbg string to slp_s0_debug for consistency
> 	- ADD ISCLK prefix to MAIN_PLL and OC_PLL
> V3:
> 	- use null terminator in bit_map array
> 	- replaced ternary operator with if/else
> 	- Removed space fixes on old code
> V2:
> 	- Clear latch bit after use
> 	- Pass pmc_dev as parameter
> 	- Use DEFINE_SHOW_ATTRIBUTE macro
>  drivers/platform/x86/intel_pmc_core.c | 120 ++++++++++++++++++++++++++++++++++
>  drivers/platform/x86/intel_pmc_core.h |   6 ++
>  2 files changed, 126 insertions(+)
> 
> diff --git a/drivers/platform/x86/intel_pmc_core.c b/drivers/platform/x86/intel_pmc_core.c
> index 43bbe74..d00fee2 100644
> --- a/drivers/platform/x86/intel_pmc_core.c
> +++ b/drivers/platform/x86/intel_pmc_core.c
> @@ -196,9 +196,67 @@ static const struct pmc_bit_map cnp_pfear_map[] = {
>  	{}
>  };
>  
> +static const struct pmc_bit_map cnp_slps0_dbg0_map[] = {
> +	{"AUDIO_D3",		BIT(0)},
> +	{"OTG_D3",		BIT(1)},
> +	{"XHCI_D3",		BIT(2)},
> +	{"LPIO_D3",		BIT(3)},
> +	{"SDX_D3",		BIT(4)},
> +	{"SATA_D3",		BIT(5)},
> +	{"UFS0_D3",		BIT(6)},
> +	{"UFS1_D3",		BIT(7)},
> +	{"EMMC_D3",		BIT(8)},
> +	{}
> +};
> +
> +static const struct pmc_bit_map cnp_slps0_dbg1_map[] = {
> +	{"SDIO_PLL_OFF",	BIT(0)},
> +	{"USB2_PLL_OFF",	BIT(1)},
> +	{"AUDIO_PLL_OFF",	BIT(2)},
> +	{"ISCLK_OC_PLL_OFF",	BIT(3)},
> +	{"ISCLK_MAIN_PLL_OFF",	BIT(4)},
> +	{"XOSC_OFF",		BIT(5)},
> +	{"LPC_CLKS_GATED",	BIT(6)},
> +	{"PCIE_CLKREQS_IDLE",	BIT(7)},
> +	{"AUDIO_ROSC_OFF",	BIT(8)},
> +	{"HPET_XOSC_CLK_REQ",	BIT(9)},
> +	{"PMC_ROSC_SLOW_CLK",	BIT(10)},
> +	{"AON2_ROSC_GATED",	BIT(11)},
> +	{"CLKACKS_DEASSERTED",	BIT(12)},
> +	{}
> +};
> +
> +static const struct pmc_bit_map cnp_slps0_dbg2_map[] = {
> +	{"MPHY_CORE_GATED",	BIT(0)},
> +	{"CSME_GATED",		BIT(1)},
> +	{"USB2_SUS_GATED",	BIT(2)},
> +	{"DYN_FLEX_IO_IDLE",	BIT(3)},
> +	{"GBE_NO_LINK",		BIT(4)},
> +	{"THERM_SEN_DISABLED",	BIT(5)},
> +	{"PCIE_LOW_POWER",	BIT(6)},
> +	{"ISH_VNNAON_REQ_ACT",	BIT(7)},
> +	{"ISH_VNN_REQ_ACT",	BIT(8)},
> +	{"CNV_VNNAON_REQ_ACT",	BIT(9)},
> +	{"CNV_VNN_REQ_ACT",	BIT(10)},
> +	{"NPK_VNNON_REQ_ACT",	BIT(11)},
> +	{"PMSYNC_STATE_IDLE",	BIT(12)},
> +	{"ALST_GT_THRES",	BIT(13)},
> +	{"PMC_ARC_PG_READY",	BIT(14)},
> +	{}
> +};
> +
> +static const struct pmc_bit_map *cnp_slps0_dbg_maps[] = {
> +	cnp_slps0_dbg0_map,
> +	cnp_slps0_dbg1_map,
> +	cnp_slps0_dbg2_map,
> +	NULL,
> +};
> +
>  static const struct pmc_reg_map cnp_reg_map = {
>  	.pfear_sts = cnp_pfear_map,
>  	.slp_s0_offset = CNP_PMC_SLP_S0_RES_COUNTER_OFFSET,
> +	.slps0_dbg_maps = cnp_slps0_dbg_maps,
> +	.slps0_dbg_offset = CNP_PMC_SLPS0_DBG_OFFSET,
>  	.ltr_ignore_offset = CNP_PMC_LTR_IGNORE_OFFSET,
>  	.regmap_length = CNP_PMC_MMIO_REG_LEN,
>  	.ppfear0_offset = CNP_PMC_HOST_PPFEAR0A,
> @@ -252,6 +310,8 @@ static int pmc_core_check_read_lock_bit(void)
>  }
>  
>  #if IS_ENABLED(CONFIG_DEBUG_FS)
> +static bool slps0_dbg_latch;
> +
>  static void pmc_core_display_map(struct seq_file *s, int index,
>  				 u8 pf_reg, const struct pmc_bit_map *pf_map)
>  {
> @@ -481,6 +541,57 @@ static const struct file_operations pmc_core_ltr_ignore_ops = {
>  	.release        = single_release,
>  };
>  
> +static void pmc_core_slps0_dbg_latch(struct pmc_dev *pmcdev, bool reset)
> +{
> +	const struct pmc_reg_map *map = pmcdev->map;
> +	u32 fd;
> +
> +	mutex_lock(&pmcdev->lock);
> +
> +	if (!reset && !slps0_dbg_latch)
> +		goto out_unlock;
> +
> +	fd = pmc_core_reg_read(pmcdev, map->slps0_dbg_offset);
> +	if (reset)
> +		fd &= ~CNP_PMC_LATCH_SLPS0_EVENTS;
> +	else
> +		fd |= CNP_PMC_LATCH_SLPS0_EVENTS;
> +	pmc_core_reg_write(pmcdev, map->slps0_dbg_offset, fd);
> +
> +	slps0_dbg_latch = 0;
> +
> +out_unlock:
> +	mutex_unlock(&pmcdev->lock);
> +}
> +
> +static int pmc_core_slps0_dbg_show(struct seq_file *s, void *unused)
> +{
> +	struct pmc_dev *pmcdev = s->private;
> +	const struct pmc_bit_map **maps = pmcdev->map->slps0_dbg_maps;
> +	const struct pmc_bit_map *map;
> +	int offset;
> +	u32 data;
> +
> +	pmc_core_slps0_dbg_latch(pmcdev, false);
> +	offset = pmcdev->map->slps0_dbg_offset;
> +	while (*maps) {
> +		map = *maps;
> +		data = pmc_core_reg_read(pmcdev, offset);
> +		offset += 4;
> +		while (map->name) {
> +			seq_printf(s, "SLP_S0_DBG: %-32s\tState: %s\n",
> +				   map->name,
> +				   data & map->bit_mask ?
> +				   "Yes" : "No");
> +			++map;
> +		}
> +		++maps;
> +	}
> +	pmc_core_slps0_dbg_latch(pmcdev, true);
> +	return 0;
> +}
> +DEFINE_SHOW_ATTRIBUTE(pmc_core_slps0_dbg);
> +
>  static void pmc_core_dbgfs_unregister(struct pmc_dev *pmcdev)
>  {
>  	debugfs_remove_recursive(pmcdev->dbgfs_dir);
> @@ -514,6 +625,15 @@ static int pmc_core_dbgfs_register(struct pmc_dev *pmcdev)
>  				    0444, dir, pmcdev,
>  				    &pmc_core_mphy_pg_ops);
>  
> +	if (pmcdev->map->slps0_dbg_maps) {
> +		debugfs_create_file("slp_s0_debug_status", 0444,
> +				    dir, pmcdev,
> +				    &pmc_core_slps0_dbg_fops);
> +
> +		debugfs_create_bool("slp_s0_debug_latch", 0644,
> +				    dir, &slps0_dbg_latch);
> +	}
> +
>  	return 0;
>  }
>  #else
> diff --git a/drivers/platform/x86/intel_pmc_core.h b/drivers/platform/x86/intel_pmc_core.h
> index 5fa5f97..93a7e99 100644
> --- a/drivers/platform/x86/intel_pmc_core.h
> +++ b/drivers/platform/x86/intel_pmc_core.h
> @@ -127,12 +127,14 @@ enum ppfear_regs {
>  #define CNP_PMC_SLP_S0_RES_COUNTER_OFFSET      0x193C
>  #define CNP_PMC_LTR_IGNORE_OFFSET              0x1B0C
>  #define CNP_PMC_PM_CFG_OFFSET                  0x1818
> +#define CNP_PMC_SLPS0_DBG_OFFSET		0x10B4
>  /* Cannonlake: PGD PFET Enable Ack Status Register(s) start */
>  #define CNP_PMC_HOST_PPFEAR0A                  0x1D90
>  
>  #define CNP_PMC_MMIO_REG_LEN                   0x2000
>  #define CNP_PPFEAR_NUM_ENTRIES                 8
>  #define CNP_PMC_READ_DISABLE_BIT               22
> +#define CNP_PMC_LATCH_SLPS0_EVENTS		BIT(31)
>  
>  struct pmc_bit_map {
>  	const char *name;
> @@ -145,6 +147,7 @@ struct pmc_bit_map {
>   * @pfear_sts:		Maps name of IP block to PPFEAR* bit
>   * @mphy_sts:		Maps name of MPHY lane to MPHY status lane status bit
>   * @pll_sts:		Maps name of PLL to corresponding bit status
> + * @slps0_dbg_maps:	Array of SLP_S0_DBG* registers containing debug info
>   * @slp_s0_offset:	PWRMBASE offset to read SLP_S0 residency
>   * @ltr_ignore_offset:	PWRMBASE offset to read/write LTR ignore bit
>   * @regmap_length:	Length of memory to map from PWRMBASE address to access
> @@ -153,6 +156,7 @@ struct pmc_bit_map {
>   *			PPFEAR
>   * @pm_cfg_offset:	PWRMBASE offset to PM_CFG register
>   * @pm_read_disable_bit: Bit index to read PMC_READ_DISABLE
> + * @slps0_dbg_offset:	PWRMBASE offset to SLP_S0_DEBUG_REG*
>   *
>   * Each PCH has unique set of register offsets and bit indexes. This structure
>   * captures them to have a common implementation.
> @@ -161,6 +165,7 @@ struct pmc_reg_map {
>  	const struct pmc_bit_map *pfear_sts;
>  	const struct pmc_bit_map *mphy_sts;
>  	const struct pmc_bit_map *pll_sts;
> +	const struct pmc_bit_map **slps0_dbg_maps;
>  	const u32 slp_s0_offset;
>  	const u32 ltr_ignore_offset;
>  	const int regmap_length;
> @@ -168,6 +173,7 @@ struct pmc_reg_map {
>  	const int ppfear_buckets;
>  	const u32 pm_cfg_offset;
>  	const int pm_read_disable_bit;
> +	const u32 slps0_dbg_offset;
>  };
>  
>  /**
> -- 
> 2.7.4
> 

-- 
Best Regards,
Rajneesh

  reply	other threads:[~2018-06-15 11:35 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CAHp75VfLqvjVPwhcsK4enhsvXSLggX9_pO9AozZT56DWDrkjPg@mail.gmail.com>
2018-05-25  1:10 ` [PATCH V2] " David E. Box
2018-05-28  7:00   ` Rajneesh Bhardwaj
2018-05-30 10:53     ` David E. Box
2018-05-30 11:33       ` Rajneesh Bhardwaj
2018-06-02  1:47         ` David E. Box
2018-05-31 18:38   ` Andy Shevchenko
2018-05-31 23:04     ` David E. Box
2018-06-01  8:25       ` Andy Shevchenko
2018-06-09  0:02         ` [V3] " Box, David E
2018-06-13 14:07           ` Rajneesh Bhardwaj
2018-06-13 16:40             ` Andy Shevchenko
2018-06-14 22:13         ` [PATCH V4] " David E. Box
2018-06-15 11:27           ` Rajneesh Bhardwaj [this message]
2018-07-02 12:19             ` Andy Shevchenko
2018-07-02 18:21               ` Rajneesh Bhardwaj

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180615112700.GA20210@raj-desk2.iind.intel.com \
    --to=rajneesh.bhardwaj@intel.com \
    --cc=andy@infradead.org \
    --cc=david.e.box@linux.intel.com \
    --cc=dvhart@infradead.org \
    --cc=kyle.d.pelton@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=platform-driver-x86@vger.kernel.org \
    --cc=vishwanath.somayaji@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®