From: Thomas Garnier <thgarnie@google.com>
To: kernel-hardening@lists.openwall.com
Cc: Thomas Garnier <thgarnie@google.com>,
Steven Rostedt <rostedt@goodmis.org>,
Ingo Molnar <mingo@redhat.com>,
Thomas Gleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@zytor.com>,
x86@kernel.org, James Hogan <jhogan@kernel.org>,
"Peter Zijlstra (Intel)" <peterz@infradead.org>,
nixiaoming <nixiaoming@huawei.com>,
Guenter Roeck <linux@roeck-us.net>,
linux-kernel@vger.kernel.org
Subject: [PATCH v5 21/27] x86/ftrace: Adapt function tracing for PIE support
Date: Mon, 25 Jun 2018 15:39:09 -0700 [thread overview]
Message-ID: <20180625224014.134829-22-thgarnie@google.com> (raw)
In-Reply-To: <20180625224014.134829-1-thgarnie@google.com>
When using PIE with function tracing, the compiler generates a
call through the GOT (call *__fentry__@GOTPCREL). This instruction
takes 6-bytes instead of 5-bytes with a relative call.
If PIE is enabled, replace the 6th byte of the GOT call by a 1-byte nop
so ftrace can handle the previous 5-bytes as before.
Position Independent Executable (PIE) support will allow to extend the
KASLR randomization range 0xffffffff80000000.
Signed-off-by: Thomas Garnier <thgarnie@google.com>
---
arch/x86/kernel/ftrace.c | 51 +++++++++++++++++++++++++-
scripts/recordmcount.c | 79 +++++++++++++++++++++++++++-------------
2 files changed, 102 insertions(+), 28 deletions(-)
diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c
index 01ebcb6f263e..2194a5d3e095 100644
--- a/arch/x86/kernel/ftrace.c
+++ b/arch/x86/kernel/ftrace.c
@@ -102,7 +102,7 @@ static const unsigned char *ftrace_nop_replace(void)
static int
ftrace_modify_code_direct(unsigned long ip, unsigned const char *old_code,
- unsigned const char *new_code)
+ unsigned const char *new_code)
{
unsigned char replaced[MCOUNT_INSN_SIZE];
@@ -135,6 +135,53 @@ ftrace_modify_code_direct(unsigned long ip, unsigned const char *old_code,
return 0;
}
+/* Bytes before call GOT offset */
+static const unsigned char got_call_preinsn[] = { 0xff, 0x15 };
+
+static int
+ftrace_modify_initial_code(unsigned long ip, unsigned const char *old_code,
+ unsigned const char *new_code)
+{
+ unsigned char replaced[MCOUNT_INSN_SIZE + 1];
+
+ /*
+ * If PIE is not enabled default to the original approach to code
+ * modification.
+ */
+ if (!IS_ENABLED(CONFIG_X86_PIE))
+ return ftrace_modify_code_direct(ip, old_code, new_code);
+
+ ftrace_expected = old_code;
+
+ /* Ensure the instructions point to a call to the GOT */
+ if (probe_kernel_read(replaced, (void *)ip, sizeof(replaced))) {
+ WARN_ONCE(1, "invalid function");
+ return -EFAULT;
+ }
+
+ if (memcmp(replaced, got_call_preinsn, sizeof(got_call_preinsn))) {
+ WARN_ONCE(1, "invalid function call");
+ return -EINVAL;
+ }
+
+ /*
+ * Build a nop slide with a 5-byte nop and 1-byte nop to keep the ftrace
+ * hooking algorithm working with the expected 5 bytes instruction.
+ */
+ memset(replaced, ideal_nops[1][0], sizeof(replaced));
+ memcpy(replaced, new_code, MCOUNT_INSN_SIZE);
+
+ ip = text_ip_addr(ip);
+
+ if (probe_kernel_write((void *)ip, replaced, sizeof(replaced)))
+ return -EPERM;
+
+ sync_core();
+
+ return 0;
+
+}
+
int ftrace_make_nop(struct module *mod,
struct dyn_ftrace *rec, unsigned long addr)
{
@@ -153,7 +200,7 @@ int ftrace_make_nop(struct module *mod,
* just modify the code directly.
*/
if (addr == MCOUNT_ADDR)
- return ftrace_modify_code_direct(rec->ip, old, new);
+ return ftrace_modify_initial_code(rec->ip, old, new);
ftrace_expected = NULL;
diff --git a/scripts/recordmcount.c b/scripts/recordmcount.c
index 895c40e8679f..aa71b912958d 100644
--- a/scripts/recordmcount.c
+++ b/scripts/recordmcount.c
@@ -171,33 +171,9 @@ umalloc(size_t size)
return addr;
}
-static unsigned char ideal_nop5_x86_64[5] = { 0x0f, 0x1f, 0x44, 0x00, 0x00 };
-static unsigned char ideal_nop5_x86_32[5] = { 0x3e, 0x8d, 0x74, 0x26, 0x00 };
-static unsigned char *ideal_nop;
-
static char rel_type_nop;
-
static int (*make_nop)(void *map, size_t const offset);
-
-static int make_nop_x86(void *map, size_t const offset)
-{
- uint32_t *ptr;
- unsigned char *op;
-
- /* Confirm we have 0xe8 0x0 0x0 0x0 0x0 */
- ptr = map + offset;
- if (*ptr != 0)
- return -1;
-
- op = map + offset - 1;
- if (*op != 0xe8)
- return -1;
-
- /* convert to nop */
- ulseek(fd_map, offset - 1, SEEK_SET);
- uwrite(fd_map, ideal_nop, 5);
- return 0;
-}
+static unsigned char *ideal_nop;
static unsigned char ideal_nop4_arm_le[4] = { 0x00, 0x00, 0xa0, 0xe1 }; /* mov r0, r0 */
static unsigned char ideal_nop4_arm_be[4] = { 0xe1, 0xa0, 0x00, 0x00 }; /* mov r0, r0 */
@@ -447,6 +423,50 @@ static void MIPS64_r_info(Elf64_Rel *const rp, unsigned sym, unsigned type)
}).r_info;
}
+static unsigned char ideal_nop5_x86_64[5] = { 0x0f, 0x1f, 0x44, 0x00, 0x00 };
+static unsigned char ideal_nop6_x86_64[6] = { 0x66, 0x0f, 0x1f, 0x44, 0x00, 0x00 };
+static unsigned char ideal_nop5_x86_32[5] = { 0x3e, 0x8d, 0x74, 0x26, 0x00 };
+static size_t ideal_nop_x86_size;
+
+static unsigned char stub_default_x86[2] = { 0xe8, 0x00 }; /* call relative */
+static unsigned char stub_got_x86[3] = { 0xff, 0x15, 0x00 }; /* call .got */
+static unsigned char *stub_x86;
+static size_t stub_x86_size;
+
+static int make_nop_x86(void *map, size_t const offset)
+{
+ uint32_t *ptr;
+ size_t stub_offset = offset - stub_x86_size;
+
+ /* confirm we have the expected stub */
+ ptr = map + stub_offset;
+ if (memcmp(ptr, stub_x86, stub_x86_size)) {
+ return -1;
+ }
+
+ /* convert to nop */
+ ulseek(fd_map, stub_offset, SEEK_SET);
+ uwrite(fd_map, ideal_nop, ideal_nop_x86_size);
+ return 0;
+}
+
+/* Swap the stub and nop for a got call if the binary is built with PIE */
+static int is_fake_mcount_x86_x64(Elf64_Rel const *rp)
+{
+ if (ELF64_R_TYPE(rp->r_info) == R_X86_64_GOTPCREL) {
+ ideal_nop = ideal_nop6_x86_64;
+ ideal_nop_x86_size = sizeof(ideal_nop6_x86_64);
+ stub_x86 = stub_got_x86;
+ stub_x86_size = sizeof(stub_got_x86);
+ mcount_adjust_64 = 1 - stub_x86_size;
+ }
+
+ /* Once the relocation was checked, rollback to default */
+ is_fake_mcount64 = fn_is_fake_mcount64;
+ return is_fake_mcount64(rp);
+}
+
+
static void
do_file(char const *const fname)
{
@@ -509,6 +529,9 @@ do_file(char const *const fname)
rel_type_nop = R_386_NONE;
make_nop = make_nop_x86;
ideal_nop = ideal_nop5_x86_32;
+ ideal_nop_x86_size = sizeof(ideal_nop5_x86_32);
+ stub_x86 = stub_default_x86;
+ stub_x86_size = sizeof(stub_default_x86);
mcount_adjust_32 = -1;
break;
case EM_ARM: reltype = R_ARM_ABS32;
@@ -533,9 +556,13 @@ do_file(char const *const fname)
case EM_X86_64:
make_nop = make_nop_x86;
ideal_nop = ideal_nop5_x86_64;
+ ideal_nop_x86_size = sizeof(ideal_nop5_x86_64);
+ stub_x86 = stub_default_x86;
+ stub_x86_size = sizeof(stub_default_x86);
reltype = R_X86_64_64;
rel_type_nop = R_X86_64_NONE;
- mcount_adjust_64 = -1;
+ is_fake_mcount64 = is_fake_mcount_x86_x64;
+ mcount_adjust_64 = 1 - stub_x86_size;
break;
} /* end switch */
--
2.18.0.rc2.346.g013aa6912e-goog
next prev parent reply other threads:[~2018-06-25 22:42 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20180625224014.134829-1-thgarnie@google.com>
2018-06-25 22:38 ` [PATCH v5 01/27] x86/crypto: Adapt assembly " Thomas Garnier
2018-06-25 22:38 ` [PATCH v5 02/27] x86: Use symbol name on bug table " Thomas Garnier
2018-06-25 22:38 ` [PATCH v5 03/27] x86: Use symbol name in jump " Thomas Garnier
2018-06-25 22:38 ` [PATCH v5 04/27] x86: Add macro to get symbol address " Thomas Garnier
2018-06-25 22:38 ` [PATCH v5 05/27] x86: relocate_kernel - Adapt assembly " Thomas Garnier
2018-06-25 22:38 ` [PATCH v5 06/27] x86/entry/64: " Thomas Garnier
2018-06-25 22:38 ` [PATCH v5 07/27] x86: pm-trace - " Thomas Garnier
2018-06-25 22:38 ` [PATCH v5 08/27] x86/CPU: " Thomas Garnier
2018-06-25 22:38 ` [PATCH v5 09/27] x86/acpi: " Thomas Garnier
2018-06-25 22:38 ` [PATCH v5 10/27] x86/boot/64: " Thomas Garnier
2018-06-25 22:38 ` [PATCH v5 11/27] x86/power/64: " Thomas Garnier
2018-06-25 22:39 ` [PATCH v5 12/27] x86/paravirt: " Thomas Garnier
2018-06-25 22:39 ` [PATCH v5 13/27] x86/boot/64: Build head64.c as mcmodel large when PIE is enabled Thomas Garnier
2018-06-25 22:39 ` [PATCH v5 14/27] x86/percpu: Adapt percpu for PIE support Thomas Garnier
2018-06-25 22:39 ` [PATCH v5 15/27] compiler: Option to default to hidden symbols Thomas Garnier
2018-06-25 23:25 ` Randy Dunlap
2018-06-25 22:39 ` [PATCH v5 16/27] compiler: Option to add PROVIDE_HIDDEN replacement for weak symbols Thomas Garnier
2018-06-25 22:39 ` [PATCH v5 17/27] x86/relocs: Handle PIE relocations Thomas Garnier
2018-06-25 22:39 ` [PATCH v5 18/27] xen: Adapt assembly for PIE support Thomas Garnier
2018-06-25 22:39 ` [PATCH v5 19/27] kvm: " Thomas Garnier
2018-06-25 22:39 ` [PATCH v5 20/27] x86: Support global stack cookie Thomas Garnier
2018-06-25 22:39 ` Thomas Garnier [this message]
2018-06-26 15:21 ` [PATCH v5 21/27] x86/ftrace: Adapt function tracing for PIE support Steven Rostedt
2018-06-25 22:39 ` [PATCH v5 22/27] x86/modules: Add option to start module section after kernel Thomas Garnier
2018-06-25 22:39 ` [PATCH v5 23/27] x86/modules: Adapt module loading for PIE support Thomas Garnier
2018-06-25 23:51 ` Randy Dunlap
2018-06-25 23:53 ` Thomas Garnier
2018-06-25 22:39 ` [PATCH v5 24/27] x86/mm: Make the x86 GOT read-only Thomas Garnier
2018-06-25 22:39 ` [PATCH v5 25/27] x86/pie: Add option to build the kernel as PIE Thomas Garnier
2018-06-25 22:39 ` [PATCH v5 26/27] x86/relocs: Add option to generate 64-bit relocations Thomas Garnier
2018-06-25 22:39 ` [PATCH v5 27/27] x86/kaslr: Add option to extend KASLR range from 1GB to 3GB Thomas Garnier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180625224014.134829-22-thgarnie@google.com \
--to=thgarnie@google.com \
--cc=hpa@zytor.com \
--cc=jhogan@kernel.org \
--cc=kernel-hardening@lists.openwall.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=mingo@redhat.com \
--cc=nixiaoming@huawei.com \
--cc=peterz@infradead.org \
--cc=rostedt@goodmis.org \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome