[PATCH 1/2] ARM: dts: imx51-babbage: Fix reg for usbh1phy

[Andrey Smirnov <andrew.smirnov@gmail.com>]

There's already a USB PHY with reg of zero on that bus - usbphy0, used
by usbotg (included from imx51.dtsi). Move usbh1phy to @1 avoid
address collision.

Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
 arch/arm/boot/dts/imx51-babbage.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index b8ca73d3d379..541c6e67ad1a 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -175,9 +175,9 @@
 		#size-cells = <0>;
 		compatible = "simple-bus";
 
-		usbh1phy: usbh1phy@0 {
+		usbh1phy: usbh1phy@1 {
 			compatible = "usb-nop-xceiv";
-			reg = <0>;
+			reg = <1>;
 			clocks = <&clk_usb>;
 			clock-names = "main_clk";
 			reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
-- 
2.17.1