From: Peter Zijlstra <peterz@infradead.org>
To: David Woodhouse <dwmw2@infradead.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>,
mhillenb@amazon.de, linux-kernel <linux-kernel@vger.kernel.org>
Subject: Re: [RFC] Make need_resched() return true when rcu_urgent_qs requested
Date: Mon, 9 Jul 2018 12:44:29 +0200 [thread overview]
Message-ID: <20180709104429.GI2476@hirez.programming.kicks-ass.net> (raw)
In-Reply-To: <1531127935.18697.57.camel@infradead.org>
On Mon, Jul 09, 2018 at 10:18:55AM +0100, David Woodhouse wrote:
> > Which seems like an entirely reasonable amount of time to kick a task.
> > Not scheduling for a second is like an eternity.
>
> If that is our only "fix" for KVM, then wouldn't that mean that things
> like expand_fdtable() would be *expected* to take "an eternity" when
> another CPU happens to be in the guest? Because vcpu_run() would still
> loop until the task gets kicked after a second?
But either proposal is exactly the same in this respect. The whole
rcu_urgent_qs thing won't be set any earlier either.
> Of course, we can explicitly put a check into the KVM loop, but that
> brings me back to my original concern — why is it OK to do it there as
> a special case and not for the general case construct of
> if (need_resched) { drop_local_locks(); cond_resched(); get_local_locks(); }
I'm not proposing anything that would differentiate between KVM and
anything else.
I just want to keep my preemption state sane-ish, and adding random
conditions to part of it just doesn't look attractive.
next prev parent reply other threads:[~2018-07-09 10:44 UTC|newest]
Thread overview: 93+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-06 14:53 David Woodhouse
2018-07-06 16:29 ` Peter Zijlstra
2018-07-06 17:11 ` Paul E. McKenney
2018-07-06 17:14 ` David Woodhouse
2018-07-06 21:12 ` Paul E. McKenney
2018-07-09 8:58 ` Peter Zijlstra
2018-07-09 8:53 ` Peter Zijlstra
2018-07-09 9:18 ` David Woodhouse
2018-07-09 10:44 ` Peter Zijlstra [this message]
2018-07-09 10:56 ` David Woodhouse
2018-07-09 11:06 ` Peter Zijlstra
2018-07-09 11:12 ` David Woodhouse
2018-07-09 11:31 ` Peter Zijlstra
2018-07-09 12:34 ` Paul E. McKenney
2018-07-09 12:47 ` David Woodhouse
2018-07-09 14:30 ` Paul E. McKenney
2018-07-09 12:55 ` Peter Zijlstra
2018-07-09 12:57 ` David Woodhouse
2018-07-09 13:02 ` Peter Zijlstra
2018-07-09 14:29 ` Paul E. McKenney
2018-07-09 14:43 ` Peter Zijlstra
2018-07-09 14:54 ` Paul E. McKenney
2018-07-09 15:26 ` Peter Zijlstra
2018-07-09 16:34 ` Paul E. McKenney
2018-07-09 16:44 ` Paul E. McKenney
2018-07-09 18:50 ` David Woodhouse
2018-07-09 20:34 ` Paul E. McKenney
2018-07-09 20:35 ` David Woodhouse
2018-07-09 20:42 ` Paul E. McKenney
2018-07-09 20:45 ` David Woodhouse
2018-07-09 21:05 ` Paul E. McKenney
2018-07-09 22:08 ` Paul E. McKenney
2018-07-11 10:57 ` David Woodhouse
2018-07-11 12:51 ` Paul E. McKenney
2018-07-11 12:58 ` David Woodhouse
2018-07-11 14:25 ` Paul E. McKenney
2018-07-11 14:23 ` David Woodhouse
2018-07-11 14:43 ` Paul E. McKenney
2018-07-11 16:49 ` Paul E. McKenney
2018-07-11 17:03 ` David Woodhouse
2018-07-11 17:48 ` Paul E. McKenney
2018-07-11 18:01 ` [PATCH v2] kvm/x86: Inform RCU of quiescent state when entering guest mode David Woodhouse
2018-07-11 18:20 ` Paul E. McKenney
2018-07-11 18:36 ` Paul E. McKenney
2018-07-11 18:39 ` Christian Borntraeger
2018-07-11 20:27 ` Paul E. McKenney
2018-07-11 20:54 ` David Woodhouse
2018-07-11 21:09 ` Paul E. McKenney
2018-07-11 21:11 ` Christian Borntraeger
2018-07-11 21:32 ` Paul E. McKenney
2018-07-11 21:39 ` Christian Borntraeger
2018-07-11 23:47 ` Paul E. McKenney
2018-07-12 8:31 ` David Woodhouse
2018-07-12 11:00 ` Christian Borntraeger
2018-07-12 11:10 ` David Woodhouse
2018-07-12 11:58 ` Christian Borntraeger
2018-07-12 12:04 ` Christian Borntraeger
2018-07-11 23:37 ` Paul E. McKenney
2018-07-12 2:15 ` Paul E. McKenney
2018-07-12 6:21 ` Christian Borntraeger
2018-07-12 9:52 ` David Woodhouse
2018-07-11 18:31 ` [RFC] Make need_resched() return true when rcu_urgent_qs requested Christian Borntraeger
2018-07-11 20:17 ` Paul E. McKenney
2018-07-11 20:19 ` David Woodhouse
2018-07-11 21:08 ` Paul E. McKenney
2018-07-12 12:00 ` David Woodhouse
2018-07-12 12:53 ` Paul E. McKenney
2018-07-12 16:17 ` Paul E. McKenney
2018-07-16 15:40 ` Paul E. McKenney
2018-07-17 8:19 ` David Woodhouse
2018-07-17 12:56 ` Paul E. McKenney
2018-07-18 15:36 ` Paul E. McKenney
2018-07-18 16:01 ` David Woodhouse
2018-07-18 16:37 ` Paul E. McKenney
2018-07-18 19:41 ` David Woodhouse
2018-07-18 20:17 ` Paul E. McKenney
2018-07-19 0:26 ` Frederic Weisbecker
2018-07-19 6:45 ` Christian Borntraeger
2018-07-19 7:20 ` David Woodhouse
2018-07-19 10:23 ` Christian Borntraeger
2018-07-19 12:55 ` Paul E. McKenney
2018-07-19 13:14 ` Frederic Weisbecker
2018-07-19 13:36 ` David Woodhouse
2018-07-19 17:09 ` Paul E. McKenney
2018-07-23 8:08 ` David Woodhouse
2018-07-23 12:22 ` Paul E. McKenney
2018-07-19 0:32 ` Frederic Weisbecker
2018-07-19 3:11 ` Paul E. McKenney
2018-07-19 6:16 ` David Woodhouse
2018-07-19 13:17 ` Frederic Weisbecker
2018-07-19 13:15 ` Frederic Weisbecker
2018-07-10 9:24 ` Peter Zijlstra
2018-07-10 16:26 ` Paul E. McKenney
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180709104429.GI2476@hirez.programming.kicks-ass.net \
--to=peterz@infradead.org \
--cc=dwmw2@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mhillenb@amazon.de \
--cc=paulmck@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome