From: John Whitmore <johnfwhitmore@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: devel@driverdev.osuosl.org, gregkh@linuxfoundation.org,
pombredanne@nexb.com, kstewart@linuxfoundation.org,
tglx@linutronix.de, John Whitmore <johnfwhitmore@gmail.com>
Subject: [PATCH 02/13] staging:rtl8192u: remove typdef from enumeration HW90_BLOCK_E - Style
Date: Fri, 13 Jul 2018 12:23:00 +0100 [thread overview]
Message-ID: <20180713112311.544-3-johnfwhitmore@gmail.com> (raw)
In-Reply-To: <20180713112311.544-1-johnfwhitmore@gmail.com>
Checkpatch warns about the creation of new types in code. This patch simply
removes the typedef from the enumeration HW90_BLOCK_E to clear this
warning. There should be no impact on run time code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
---
drivers/staging/rtl8192u/r819xU_phy.c | 6 +++---
drivers/staging/rtl8192u/r819xU_phy.h | 6 +++---
2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/staging/rtl8192u/r819xU_phy.c b/drivers/staging/rtl8192u/r819xU_phy.c
index bc86e6bfb8f5..0462de662eff 100644
--- a/drivers/staging/rtl8192u/r819xU_phy.c
+++ b/drivers/staging/rtl8192u/r819xU_phy.c
@@ -695,7 +695,7 @@ static void rtl8192_InitBBRFRegDef(struct net_device *dev)
* return: return whether BB and RF is ok (0:OK, 1:Fail)
* notice: This function may be removed in the ASIC
******************************************************************************/
-u8 rtl8192_phy_checkBBAndRF(struct net_device *dev, HW90_BLOCK_E CheckBlock,
+u8 rtl8192_phy_checkBBAndRF(struct net_device *dev, enum HW90_BLOCK_E CheckBlock,
RF90_RADIO_PATH_E eRFPath)
{
u8 ret = 0;
@@ -787,10 +787,10 @@ static void rtl8192_BB_Config_ParaFile(struct net_device *dev)
/* ----Ckeck FPGAPHY0 and PHY1 board is OK---- */
/* TODO: this function should be removed on ASIC */
- for (eCheckItem = (HW90_BLOCK_E)HW90_BLOCK_PHY0;
+ for (eCheckItem = (enum HW90_BLOCK_E)HW90_BLOCK_PHY0;
eCheckItem <= HW90_BLOCK_PHY1; eCheckItem++) {
/* don't care RF path */
- status = rtl8192_phy_checkBBAndRF(dev, (HW90_BLOCK_E)eCheckItem,
+ status = rtl8192_phy_checkBBAndRF(dev, (enum HW90_BLOCK_E)eCheckItem,
(RF90_RADIO_PATH_E)0);
if (status != 0) {
RT_TRACE((COMP_ERR | COMP_PHY),
diff --git a/drivers/staging/rtl8192u/r819xU_phy.h b/drivers/staging/rtl8192u/r819xU_phy.h
index 4471a0e00936..0f680a04a468 100644
--- a/drivers/staging/rtl8192u/r819xU_phy.h
+++ b/drivers/staging/rtl8192u/r819xU_phy.h
@@ -34,13 +34,13 @@ extern u32 rtl819XRadioB_Array[];
extern u32 rtl819XRadioC_Array[];
extern u32 rtl819XRadioD_Array[];
-typedef enum _HW90_BLOCK {
+enum HW90_BLOCK_E {
HW90_BLOCK_MAC = 0,
HW90_BLOCK_PHY0 = 1,
HW90_BLOCK_PHY1 = 2,
HW90_BLOCK_RF = 3,
HW90_BLOCK_MAXIMUM = 4, /* Never use this */
-} HW90_BLOCK_E, *PHW90_BLOCK_E;
+};
typedef enum _RF90_RADIO_PATH {
RF90_PATH_A = 0, /* Radio Path A */
@@ -69,7 +69,7 @@ u32 rtl8192_phy_QueryRFReg(struct net_device *dev, RF90_RADIO_PATH_E eRFPath,
void rtl8192_phy_configmac(struct net_device *dev);
void rtl8192_phyConfigBB(struct net_device *dev, u8 ConfigType);
u8 rtl8192_phy_checkBBAndRF(struct net_device *dev,
- HW90_BLOCK_E CheckBlock, RF90_RADIO_PATH_E eRFPath);
+ enum HW90_BLOCK_E CheckBlock, RF90_RADIO_PATH_E eRFPath);
void rtl8192_BBConfig(struct net_device *dev);
void rtl8192_phy_getTxPower(struct net_device *dev);
void rtl8192_phy_setTxPower(struct net_device *dev, u8 channel);
--
2.18.0
next prev parent reply other threads:[~2018-07-13 11:23 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-13 11:22 [0/13] staging:rtl8192u: Coding style changes John Whitmore
2018-07-13 11:22 ` [PATCH 01/13] staging:rtl8192u: remove typedef of enumeration SwChnlCmdID - Style John Whitmore
2018-07-13 11:23 ` John Whitmore [this message]
2018-07-13 11:23 ` [PATCH 03/13] staging:rtl8192u: Remove typdef from enumeration RF90_RADIO_PATH_E " John Whitmore
2018-07-13 11:23 ` [PATCH 04/13] staging:rtl8192u: remove typedef from structure SwChnlCmd " John Whitmore
2018-07-13 11:23 ` [PATCH 05/13] staging:rtl8192u: Rename SwChnlCmdID > switch_chan_cmd_id - Coding Style John Whitmore
2018-07-13 11:23 ` [PATCH 06/13] staging:rtl8192u: Rename enum label CmdID_End > CMD_ID_END - Style John Whitmore
2018-07-13 11:23 ` [PATCH 07/13] staging:rtl8192u: rename CmdID_SetTxPowerLevel > CMD_ID_SET_TX_PWR_LEVEL John Whitmore
2018-07-13 11:23 ` [PATCH 08/13] staging:rtl8192u: Remove unused enum label CmdID_BBRegWrite10 John Whitmore
2018-07-13 11:23 ` [PATCH 09/13] staging:rtl8192u: Rename CmdID_WritePortUlong > CMD_ID_WRITE_PORT_ULONG John Whitmore
2018-07-13 11:23 ` [PATCH 10/13] staging:rtl8192u: Rename CmdID_WritePortUshort > CMD_ID_WRITE_PORT_USHORT John Whitmore
2018-07-13 11:23 ` [PATCH 11/13] staging:rtl8192u: Rename CmdID_WritePortUchar > CMD_ID_WRITE_PORT_UCHAR John Whitmore
2018-07-13 11:23 ` [PATCH 12/13] staging:rtl8192u: Rename CmdID_RF_WriteReg > CMD_ID_RF_WRITE_REG - Style John Whitmore
2018-07-13 11:23 ` [PATCH 13/13] staging:rtl8192u: Rename file macro to avoid camel case - Coding Style John Whitmore
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180713112311.544-3-johnfwhitmore@gmail.com \
--to=johnfwhitmore@gmail.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=kstewart@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pombredanne@nexb.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome