[PATCH] sound: pci: cthw20k1: Replace mdelay() with msleep()

[Jia-Ju Bai <baijiaju1990@gmail.com>]

hw_pll_init(), hw_reset_dac() and hw_card_init() are never 
called in atomic context.
They calls mdelay() to busily wait, which is not necessary.
mdelay() can be replaced with msleep().

This is found by a static analysis tool named DCNS written by myself.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
---
 sound/pci/ctxfi/cthw20k1.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/sound/pci/ctxfi/cthw20k1.c b/sound/pci/ctxfi/cthw20k1.c
index 8e6eb9d7984b..6a051a1c3724 100644
--- a/sound/pci/ctxfi/cthw20k1.c
+++ b/sound/pci/ctxfi/cthw20k1.c
@@ -1319,7 +1319,7 @@ static int hw_pll_init(struct hw *hw, unsigned int rsr)
 			break;
 
 		hw_write_20kx(hw, PLLCTL, pllctl);
-		mdelay(40);
+		msleep(40);
 	}
 	if (i >= 3) {
 		dev_alert(hw->card->dev, "PLL initialization failed!!!\n");
@@ -1407,7 +1407,7 @@ static int hw_reset_dac(struct hw *hw)
 	/* To be effective, need to reset the DAC twice. */
 	for (i = 0; i < 2;  i++) {
 		/* set gpio */
-		mdelay(100);
+		msleep(100);
 		gpioorg = (u16)hw_read_20kx(hw, GPIO);
 		gpioorg &= 0xfffd;
 		hw_write_20kx(hw, GPIO, gpioorg);
@@ -2030,7 +2030,7 @@ static int hw_card_init(struct hw *hw, struct card_conf *info)
 	hw_write_20kx(hw, GIE, 0);
 	/* Reset all SRC pending interrupts */
 	hw_write_20kx(hw, SRCIP, 0);
-	mdelay(30);
+	msleep(30);
 
 	/* Detect the card ID and configure GPIO accordingly. */
 	switch (hw->model) {
-- 
2.17.0