From: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
To: linux-snps-arc@lists.infradead.org
Cc: linux-kernel@vger.kernel.org, linux-arch@vger.kernel.org,
Vineet Gupta <Vineet.Gupta1@synopsys.com>,
Alexey Brodkin <Alexey.Brodkin@synopsys.com>,
hch@lst.de, Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Subject: [PATCH v2 1/4] ARC: DTS: mark DMA devices connected through IOC port as dma-coherent
Date: Mon, 30 Jul 2018 19:26:33 +0300 [thread overview]
Message-ID: <20180730162636.3556-2-Eugeniy.Paltsev@synopsys.com> (raw)
In-Reply-To: <20180730162636.3556-1-Eugeniy.Paltsev@synopsys.com>
Mark DMA devices on AXS103 and HSDK boards connected through IOC
port as dma-coherent.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
---
Changes v1->v2:
* None.
arch/arc/boot/dts/axc003.dtsi | 26 ++++++++++++++++++++++++++
arch/arc/boot/dts/axc003_idu.dtsi | 26 ++++++++++++++++++++++++++
arch/arc/boot/dts/hsdk.dts | 4 ++++
3 files changed, 56 insertions(+)
diff --git a/arch/arc/boot/dts/axc003.dtsi b/arch/arc/boot/dts/axc003.dtsi
index dc91c663bcc0..d75d65ddf8e3 100644
--- a/arch/arc/boot/dts/axc003.dtsi
+++ b/arch/arc/boot/dts/axc003.dtsi
@@ -93,6 +93,32 @@
};
};
+ /*
+ * Mark DMA peripherals connected via IOC port as dma-coherent. We do
+ * it via overlay because peripherals defined in axs10x_mb.dtsi are
+ * used for both AXS101 and AXS103 boards and only AXS103 has IOC (so
+ * only AXS103 board has HW-coherent DMA peripherals)
+ * We don't need to mark pgu@17000 as dma-coherent because it uses
+ * external DMA buffer located outside of IOC aperture.
+ */
+ axs10x_mb {
+ ethernet@0x18000 {
+ dma-coherent;
+ };
+
+ ehci@0x40000 {
+ dma-coherent;
+ };
+
+ ohci@0x60000 {
+ dma-coherent;
+ };
+
+ mmc@0x15000 {
+ dma-coherent;
+ };
+ };
+
/*
* The DW APB ICTL intc on MB is connected to CPU intc via a
* DT "invisible" DW APB GPIO block, configured to simply pass thru
diff --git a/arch/arc/boot/dts/axc003_idu.dtsi b/arch/arc/boot/dts/axc003_idu.dtsi
index 69ff4895f2ba..a05bb737ea63 100644
--- a/arch/arc/boot/dts/axc003_idu.dtsi
+++ b/arch/arc/boot/dts/axc003_idu.dtsi
@@ -100,6 +100,32 @@
};
};
+ /*
+ * Mark DMA peripherals connected via IOC port as dma-coherent. We do
+ * it via overlay because peripherals defined in axs10x_mb.dtsi are
+ * used for both AXS101 and AXS103 boards and only AXS103 has IOC (so
+ * only AXS103 board has HW-coherent DMA peripherals)
+ * We don't need to mark pgu@17000 as dma-coherent because it uses
+ * external DMA buffer located outside of IOC aperture.
+ */
+ axs10x_mb {
+ ethernet@0x18000 {
+ dma-coherent;
+ };
+
+ ehci@0x40000 {
+ dma-coherent;
+ };
+
+ ohci@0x60000 {
+ dma-coherent;
+ };
+
+ mmc@0x15000 {
+ dma-coherent;
+ };
+ };
+
/*
* This INTC is actually connected to DW APB GPIO
* which acts as a wire between MB INTC and CPU INTC.
diff --git a/arch/arc/boot/dts/hsdk.dts b/arch/arc/boot/dts/hsdk.dts
index 006aa3de5348..ebb686c21393 100644
--- a/arch/arc/boot/dts/hsdk.dts
+++ b/arch/arc/boot/dts/hsdk.dts
@@ -176,6 +176,7 @@
phy-handle = <&phy0>;
resets = <&cgu_rst HSDK_ETH_RESET>;
reset-names = "stmmaceth";
+ dma-coherent;
mdio {
#address-cells = <1>;
@@ -194,12 +195,14 @@
compatible = "snps,hsdk-v1.0-ohci", "generic-ohci";
reg = <0x60000 0x100>;
interrupts = <15>;
+ dma-coherent;
};
ehci@40000 {
compatible = "snps,hsdk-v1.0-ehci", "generic-ehci";
reg = <0x40000 0x100>;
interrupts = <15>;
+ dma-coherent;
};
mmc@a000 {
@@ -212,6 +215,7 @@
clock-names = "biu", "ciu";
interrupts = <12>;
bus-width = <4>;
+ dma-coherent;
};
};
--
2.14.4
next prev parent reply other threads:[~2018-07-30 16:26 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-30 16:26 [PATCH v2 0/4] ARC: allow to use IOC and non-IOC DMA devices simultaneously Eugeniy Paltsev
2018-07-30 16:26 ` Eugeniy Paltsev [this message]
2018-07-30 16:26 ` [PATCH v2 2/4] " Eugeniy Paltsev
2018-08-13 16:24 ` Vineet Gupta
2018-08-13 17:08 ` Eugeniy Paltsev
2018-08-20 22:34 ` Vineet Gupta
2018-08-22 18:40 ` Eugeniy Paltsev
2018-08-23 14:05 ` hch
2018-09-04 18:13 ` Vineet Gupta
2018-07-30 16:26 ` [PATCH v2 3/4] ARC: IOC: panic if both IOC and ZONE_HIGHMEM enabled Eugeniy Paltsev
2018-07-30 16:26 ` [PATCH v2 4/4] ARC: don't check for HIGHMEM pages in arch_dma_alloc Eugeniy Paltsev
2018-07-31 8:08 ` Christoph Hellwig
2018-08-13 16:19 ` [PATCH v2 0/4] ARC: allow to use IOC and non-IOC DMA devices simultaneously Vineet Gupta
2018-08-13 17:27 ` Eugeniy Paltsev
2018-08-13 17:39 ` Vineet Gupta
2018-09-04 20:14 ` Vineet Gupta
2018-09-04 21:11 ` Christoph Hellwig
2018-09-04 21:34 ` Vineet Gupta
2018-09-04 21:38 ` Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180730162636.3556-2-Eugeniy.Paltsev@synopsys.com \
--to=eugeniy.paltsev@synopsys.com \
--cc=Alexey.Brodkin@synopsys.com \
--cc=Vineet.Gupta1@synopsys.com \
--cc=hch@lst.de \
--cc=linux-arch@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-snps-arc@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®