From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: MyungJoo Ham <myungjoo.ham@samsung.com>,
Chanwoo Choi <cw00.choi@samsung.com>,
linux-kernel@vger.kernel.org, Hans de Goede <hdegoede@redhat.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [PATCH v1 5/7] extcon: cht-wc: Correct USBID bit field handling
Date: Mon, 27 Aug 2018 18:35:55 +0300 [thread overview]
Message-ID: <20180827153557.58363-5-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20180827153557.58363-1-andriy.shevchenko@linux.intel.com>
USBID is 2-bit bit field according to specification. Make it clear.
No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/extcon/extcon-intel-cht-wc.c | 32 +++++++++++++++++-----------
1 file changed, 19 insertions(+), 13 deletions(-)
diff --git a/drivers/extcon/extcon-intel-cht-wc.c b/drivers/extcon/extcon-intel-cht-wc.c
index 71b1126dbb0b..ad1fd70e4023 100644
--- a/drivers/extcon/extcon-intel-cht-wc.c
+++ b/drivers/extcon/extcon-intel-cht-wc.c
@@ -62,8 +62,11 @@
#define CHT_WC_PWRSRC_VBUS BIT(0)
#define CHT_WC_PWRSRC_DC BIT(1)
#define CHT_WC_PWRSRC_BATT BIT(2)
-#define CHT_WC_PWRSRC_ID_GND BIT(3)
-#define CHT_WC_PWRSRC_ID_FLOAT BIT(4)
+#define CHT_WC_PWRSRC_USBID_MASK GENMASK(4, 3)
+#define CHT_WC_PWRSRC_USBID_SHIFT 3
+#define CHT_WC_PWRSRC_RID_ACA 0
+#define CHT_WC_PWRSRC_RID_GND 1
+#define CHT_WC_PWRSRC_RID_FLOAT 2
#define CHT_WC_VBUS_GPIO_CTLO 0x6e2d
#define CHT_WC_VBUS_GPIO_CTLO_OUTPUT BIT(0)
@@ -104,16 +107,20 @@ struct cht_wc_extcon_data {
static int cht_wc_extcon_get_id(struct cht_wc_extcon_data *ext, int pwrsrc_sts)
{
- if (pwrsrc_sts & CHT_WC_PWRSRC_ID_GND)
+ switch ((pwrsrc_sts & CHT_WC_PWRSRC_USBID_MASK) >> CHT_WC_PWRSRC_USBID_SHIFT) {
+ case CHT_WC_PWRSRC_RID_GND:
return USB_ID_GND;
- if (pwrsrc_sts & CHT_WC_PWRSRC_ID_FLOAT)
+ case CHT_WC_PWRSRC_RID_FLOAT:
return USB_ID_FLOAT;
-
- /*
- * Once we have iio support for the gpadc we should read the USBID
- * gpadc channel here and determine ACA role based on that.
- */
- return USB_ID_FLOAT;
+ case CHT_WC_PWRSRC_RID_ACA:
+ default:
+ /*
+ * Once we have IIO support for the GPADC we should read
+ * the USBID GPADC channel here and determine ACA role
+ * based on that.
+ */
+ return USB_ID_FLOAT;
+ }
}
static int cht_wc_extcon_get_charger(struct cht_wc_extcon_data *ext,
@@ -292,6 +299,7 @@ static int cht_wc_extcon_probe(struct platform_device *pdev)
{
struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
struct cht_wc_extcon_data *ext;
+ unsigned long mask = ~(CHT_WC_PWRSRC_VBUS | CHT_WC_PWRSRC_USBID_MASK);
int irq, ret;
irq = platform_get_irq(pdev, 0);
@@ -352,9 +360,7 @@ static int cht_wc_extcon_probe(struct platform_device *pdev)
}
/* Unmask irqs */
- ret = regmap_write(ext->regmap, CHT_WC_PWRSRC_IRQ_MASK,
- (int)~(CHT_WC_PWRSRC_VBUS | CHT_WC_PWRSRC_ID_GND |
- CHT_WC_PWRSRC_ID_FLOAT));
+ ret = regmap_write(ext->regmap, CHT_WC_PWRSRC_IRQ_MASK, mask);
if (ret) {
dev_err(ext->dev, "Error writing irq-mask: %d\n", ret);
goto disable_sw_control;
--
2.18.0
next prev parent reply other threads:[~2018-08-27 15:36 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20180827153615epcas5p212a6279a5d5c3cbfc2608cbf34c2803d@epcas5p2.samsung.com>
2018-08-27 15:35 ` [PATCH v1 1/7] extcon: Make static analyzer happy about union assignment Andy Shevchenko
2018-08-27 15:35 ` [PATCH v1 2/7] extcon: Switch to use kasprintf() instead of open coded Andy Shevchenko
2018-08-29 9:40 ` David Laight
2018-08-27 15:35 ` [PATCH v1 3/7] extcon: cht-wc: Return from default case to avoid warnings Andy Shevchenko
2018-08-27 15:35 ` [PATCH v1 4/7] extcon: cht-wc: Fix definition names according to spec Andy Shevchenko
2018-08-27 15:35 ` Andy Shevchenko [this message]
2018-08-27 15:35 ` [PATCH v1 6/7] extcon: cht-wc: Convert to use SPDX identifier Andy Shevchenko
2018-08-27 15:35 ` [PATCH v1 7/7] extcon: int3496: " Andy Shevchenko
2018-08-29 7:06 ` [PATCH v1 1/7] extcon: Make static analyzer happy about union assignment Chanwoo Choi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180827153557.58363-5-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=cw00.choi@samsung.com \
--cc=hdegoede@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=myungjoo.ham@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®