[RFT PATCH 1/2] pinctrl: ssbi-gpio: Fix pm8xxx_pin_config_get() to be compliant

[Douglas Anderson <dianders@chromium.org>]

If you look at "pinconf-groups" in debugfs for ssbi-gpio you'll notice
it looks like nonsense.

The problem is fairly well described in commit 1cf86bc21257 ("pinctrl:
qcom: spmi-gpio: Fix pmic_gpio_config_get() to be compliant") and
commit 05e0c828955c ("pinctrl: msm: Fix msm_config_group_get() to be
compliant"), but it was pointed out that ssbi-gpio has the same
problem.  Let's fix it there too.

Fixes: b4c45fe974bc ("pinctrl: qcom: ssbi: Family A gpio & mpp drivers")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
---

 drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c | 28 ++++++++++++++++++------
 1 file changed, 21 insertions(+), 7 deletions(-)

diff --git a/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c b/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c
index f53e32a9d8fc..0e153bae322e 100644
--- a/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c
+++ b/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c
@@ -260,22 +260,32 @@ static int pm8xxx_pin_config_get(struct pinctrl_dev *pctldev,
 
 	switch (param) {
 	case PIN_CONFIG_BIAS_DISABLE:
-		arg = pin->bias == PM8XXX_GPIO_BIAS_NP;
+		if (pin->bias != PM8XXX_GPIO_BIAS_NP)
+			return -EINVAL;
+		arg = 1;
 		break;
 	case PIN_CONFIG_BIAS_PULL_DOWN:
-		arg = pin->bias == PM8XXX_GPIO_BIAS_PD;
+		if (pin->bias != PM8XXX_GPIO_BIAS_PD)
+			return -EINVAL;
+		arg = 1;
 		break;
 	case PIN_CONFIG_BIAS_PULL_UP:
-		arg = pin->bias <= PM8XXX_GPIO_BIAS_PU_1P5_30;
+		if (pin->bias > PM8XXX_GPIO_BIAS_PU_1P5_30)
+			return -EINVAL;
+		arg = 1;
 		break;
 	case PM8XXX_QCOM_PULL_UP_STRENGTH:
 		arg = pin->pull_up_strength;
 		break;
 	case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
-		arg = pin->disable;
+		if (!pin->disable)
+			return -EINVAL;
+		arg = 1;
 		break;
 	case PIN_CONFIG_INPUT_ENABLE:
-		arg = pin->mode == PM8XXX_GPIO_MODE_INPUT;
+		if (pin->mode != PM8XXX_GPIO_MODE_INPUT)
+			return -EINVAL;
+		arg = 1;
 		break;
 	case PIN_CONFIG_OUTPUT:
 		if (pin->mode & PM8XXX_GPIO_MODE_OUTPUT)
@@ -290,10 +300,14 @@ static int pm8xxx_pin_config_get(struct pinctrl_dev *pctldev,
 		arg = pin->output_strength;
 		break;
 	case PIN_CONFIG_DRIVE_PUSH_PULL:
-		arg = !pin->open_drain;
+		if (pin->open_drain)
+			return -EINVAL;
+		arg = 1;
 		break;
 	case PIN_CONFIG_DRIVE_OPEN_DRAIN:
-		arg = pin->open_drain;
+		if (!pin->open_drain)
+			return -EINVAL;
+		arg = 1;
 		break;
 	default:
 		return -EINVAL;
-- 
2.19.0.rc0.228.g281dcd1b4d0-goog