From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: James Hogan <jhogan@kernel.org>, Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>,
linux-kernel@vger.kernel.org, linux-mips@linux-mips.org,
Alexandre Belloni <alexandre.belloni@bootlin.com>
Subject: [PATCH] MIPS: generic: Add Network, SPI and I2C to ocelot_defconfig
Date: Fri, 31 Aug 2018 17:04:34 +0200 [thread overview]
Message-ID: <20180831150434.25050-1-alexandre.belloni@bootlin.com> (raw)
Add support for the integrated switch, and the SPI and I2C controller found
on MSCC Ocelot.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
arch/mips/configs/generic/board-ocelot.config | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/arch/mips/configs/generic/board-ocelot.config b/arch/mips/configs/generic/board-ocelot.config
index aa815761d85e..f607888d2483 100644
--- a/arch/mips/configs/generic/board-ocelot.config
+++ b/arch/mips/configs/generic/board-ocelot.config
@@ -18,17 +18,25 @@ CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_GPIO_SYSFS=y
+CONFIG_NETDEVICES=y
+CONFIG_MSCC_OCELOT_SWITCH=y
+CONFIG_MSCC_OCELOT_SWITCH_OCELOT=y
+CONFIG_MDIO_MSCC_MIIM=y
+CONFIG_MICROSEMI_PHY=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_SPI=y
CONFIG_SPI_BITBANG=y
CONFIG_SPI_DESIGNWARE=y
+CONFIG_SPI_DW_MMIO=y
CONFIG_SPI_SPIDEV=y
+CONFIG_GPIO_SYSFS=y
+
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_OCELOT_RESET=y
--
2.19.0.rc1
reply other threads:[~2018-08-31 15:04 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180831150434.25050-1-alexandre.belloni@bootlin.com \
--to=alexandre.belloni@bootlin.com \
--cc=jhogan@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=paul.burton@mips.com \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®