From: "Andrew F. Davis" <afd@ti.com>
To: Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <fabio.estevam@nxp.com>,
NXP Linux Team <linux-imx@nxp.com>
Cc: <linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, "Andrew F . Davis" <afd@ti.com>
Subject: [PATCH 1/2] ARM: dts: imx6: RDU2: Fix the audio CODEC's reset pin
Date: Fri, 31 Aug 2018 14:17:31 -0500 [thread overview]
Message-ID: <20180831191732.25504-1-afd@ti.com> (raw)
The correct DT property for specifying a GPIO used for reset
is "reset-gpios", fix this here.
Fixes: d763762e3b58 ("ARM: dts: imx6: add ZII RDU2 boards")
Signed-off-by: Andrew F. Davis <afd@ti.com>
---
arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
index 7fff3717cf7c..a0f5cfda0055 100644
--- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
@@ -384,7 +384,7 @@
AVDD-supply = <®_3p3v>;
IOVDD-supply = <®_3p3v>;
DVDD-supply = <&vgen4_reg>;
- gpio-reset = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
};
accel@1c {
@@ -572,7 +572,7 @@
AVDD-supply = <®_3p3v>;
IOVDD-supply = <®_3p3v>;
DVDD-supply = <&vgen4_reg>;
- gpio-reset = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
};
touchscreen@20 {
--
2.18.0
next reply other threads:[~2018-08-31 19:17 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-31 19:17 Andrew F. Davis [this message]
2018-08-31 19:17 ` [PATCH 2/2] ARM: dts: imx: " Andrew F. Davis
2018-09-03 4:54 ` [PATCH 1/2] ARM: dts: imx6: RDU2: " Shawn Guo
2018-09-04 13:35 ` Andrew F. Davis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180831191732.25504-1-afd@ti.com \
--to=afd@ti.com \
--cc=fabio.estevam@nxp.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome