From: Andi Kleen <ak@linux.intel.com>
To: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>,
acme@kernel.org, jolsa@kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 04/10] perf, tools, script: Allow sym and dso without ip, addr
Date: Mon, 3 Sep 2018 09:12:30 -0700 [thread overview]
Message-ID: <20180903161230.GH27886@tassilo.jf.intel.com> (raw)
In-Reply-To: <20180903071510.GA24575@krava>
On Mon, Sep 03, 2018 at 09:15:10AM +0200, Jiri Olsa wrote:
> On Fri, Aug 31, 2018 at 03:02:00PM -0700, Andi Kleen wrote:
> > From: Andi Kleen <ak@linux.intel.com>
> >
> > Currently sym and dso require printing ip and addr because
> > the print function is tied to those outputs. With callindent
> > it makes sense to print the symbol or dso without numerical
> > IP or ADDR. So change the dependency check to only check the
> > underlying attribute.
> >
> > This allows to remove a lot of noise in callindent output by
> > dropping the numerical addresses, which are not all that useful.
> >
> > Before
> >
> > % perf script --itrace=cr -F +callindent
> > swapper 0 [000] 156546.354971: 1 branches: pt_config 0 [unknown] ([unknown]) => ffffffff81010486 pt_config ([kernel.kallsyms])
> > swapper 0 [000] 156546.354971: 1 branches: pt_config ffffffff81010499 pt_config ([kernel.kallsyms]) => ffffffff8101063e pt_event_add ([kernel.kallsyms])
> > swapper 0 [000] 156546.354971: 1 branches: pt_event_add ffffffff81010635 pt_event_add ([kernel.kallsyms]) => ffffffff8115e687 event_sched_in.isra.107 ([kernel.kallsyms])
> > swapper 0 [000] 156546.354971: 1 branches: perf_pmu_enable ffffffff8115e726 event_sched_in.isra.107 ([kernel.kallsyms]) => ffffffff811579b0 perf_pmu_enable ([kernel.kallsyms])
> > swapper 0 [000] 156546.354971: 1 branches: perf_pmu_nop_void ffffffff81151730 perf_pmu_nop_void ([kernel.kallsyms]) => ffffffff8115e72b event_sched_in.isra.107 ([kernel.kallsyms])
> > swapper 0 [000] 156546.354971: 1 branches: event_sched_in.isra.107 ffffffff8115e737 event_sched_in.isra.107 ([kernel.kallsyms]) => ffffffff8115e7a5 group_sched_in ([kernel.kallsyms])
> > swapper 0 [000] 156546.354971: 1 branches: __x86_indirect_thunk_rax ffffffff8115e7f6 group_sched_in ([kernel.kallsyms]) => ffffffff81a03000 __x86_indirect_thunk_rax ([kernel.kallsyms])
> >
> > After
> >
> > % perf script --itrace=cr -F +callindent,-ip,-sym,-symoff
> > swapper 0 [000] 156546.354971: 1 branches: pt_config
> > swapper 0 [000] 156546.354971: 1 branches: pt_config
> > swapper 0 [000] 156546.354971: 1 branches: pt_event_add
> > swapper 0 [000] 156546.354971: 1 branches: perf_pmu_enable
> > swapper 0 [000] 156546.354971: 1 branches: perf_pmu_nop_void
> > swapper 0 [000] 156546.354971: 1 branches: event_sched_in.isra.107
> > swapper 0 [000] 156546.354971: 1 branches: __x86_indirect_thunk_rax
> > swapper 0 [000] 156546.354971: 1 branches: perf_pmu_nop_int
> > swapper 0 [000] 156546.354971: 1 branches: group_sched_in
> > swapper 0 [000] 156546.354971: 1 branches: event_filter_match
> > swapper 0 [000] 156546.354971: 1 branches: event_filter_match
> > swapper 0 [000] 156546.354971: 1 branches: group_sched_in
>
> I'm getting different output than advertised
>
> [jolsa@krava perf]$ ./perf script --itrace=cr -F +callindent,-ip,-sym,-symoff | head -3
> ls 1926 [000] 55509.544711: 1 branches:uhH: _start => 7f9722fa0f60 (/usr/lib64/ld-2.27.so)
> ls 1926 [000] 55509.544711: 1 branches:uhH: _start => 0 ([unknown])
> ls 1926 [000] 55509.544716: 1 branches:uhH: _start => 7f9722fa0f60 (/usr/lib64/ld-2.27.so)
Yes it needs the next patch too. There's no good way to show the effect independently.
I will merge them into one.
-Andi
next prev parent reply other threads:[~2018-09-03 16:12 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-31 22:01 Make perf script easier to use for itrace Andi Kleen
2018-08-31 22:01 ` [PATCH v2 01/10] perf tools: Report itrace options in help Andi Kleen
2018-08-31 22:01 ` [PATCH v2 02/10] tools, pager: Support overwriting the pager Andi Kleen
2018-08-31 22:01 ` [PATCH v2 03/10] tools, perf, script: Add --insn-trace for instruction decoding Andi Kleen
2018-08-31 22:02 ` [PATCH v2 04/10] perf, tools, script: Allow sym and dso without ip, addr Andi Kleen
2018-09-03 7:15 ` Jiri Olsa
2018-09-03 16:12 ` Andi Kleen [this message]
2018-08-31 22:02 ` [PATCH v2 05/10] tools, perf, script: Set user_set/wildcard_set for +- fields in -F Andi Kleen
2018-08-31 22:02 ` [PATCH v2 06/10] perf, tools, script: Implement - for typed fields Andi Kleen
2018-09-03 7:17 ` Jiri Olsa
2018-08-31 22:02 ` [PATCH v2 07/10] perf, tools, script: Print DSO for callindent Andi Kleen
2018-08-31 22:02 ` [PATCH v2 08/10] perf, tools, script: Make itrace script default to all calls Andi Kleen
2018-08-31 22:02 ` [PATCH v2 09/10] tools, perf, script: Add --call-trace and --call-ret-trace Andi Kleen
2018-08-31 22:02 ` [PATCH v2 10/10] tools, perf, script: Implement --graph-function Andi Kleen
2018-09-03 7:51 ` Jiri Olsa
2018-09-03 15:44 ` Andi Kleen
2018-08-31 22:54 ` Make perf script easier to use for itrace Kim Phillips
2018-09-03 7:31 ` Jiri Olsa
2018-09-03 15:50 ` Andi Kleen
2018-09-03 7:52 ` Jiri Olsa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180903161230.GH27886@tassilo.jf.intel.com \
--to=ak@linux.intel.com \
--cc=acme@kernel.org \
--cc=andi@firstfloor.org \
--cc=jolsa@kernel.org \
--cc=jolsa@redhat.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome