From: Vivek Gautam <vivek.gautam@codeaurora.org>
To: kishon@ti.com, vinholikatti@gmail.com, jejb@linux.vnet.ibm.com,
martin.petersen@oracle.com, linux-kernel@vger.kernel.org,
linux-scsi@vger.kernel.org
Cc: subhashj@codeaurora.org, bjorn.andersson@linaro.org,
evgreen@chromium.org, linux-arm-msm@vger.kernel.org,
Vivek Gautam <vivek.gautam@codeaurora.org>
Subject: [PATCH 2/3] scsi/ufs: qcom: Remove ufs_qcom_phy_*() calls from host
Date: Tue, 4 Sep 2018 15:47:18 +0530 [thread overview]
Message-ID: <20180904101719.18049-3-vivek.gautam@codeaurora.org> (raw)
In-Reply-To: <20180904101719.18049-1-vivek.gautam@codeaurora.org>
The host makes direct calls into phy using ufs_qcom_phy_*()
APIs. These APIs are only defined for 20nm qcom-ufs-qmp phy
which is not being used by any architecture as yet. Future
architectures too are not going to use 20nm ufs phy.
So remove these ufs_qcom_phy_*() calls from host to let further
change declare the 20nm phy as broken.
Also remove couple of stale enum defines for ufs phy.
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
---
drivers/phy/qualcomm/phy-qcom-ufs-i.h | 2 +-
drivers/scsi/ufs/ufs-qcom.c | 28 +---------------------------
drivers/scsi/ufs/ufs-qcom.h | 5 -----
include/linux/phy/phy-qcom-ufs.h | 24 ------------------------
4 files changed, 2 insertions(+), 57 deletions(-)
delete mode 100644 include/linux/phy/phy-qcom-ufs.h
diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-i.h b/drivers/phy/qualcomm/phy-qcom-ufs-i.h
index 822c83b8efcd..681644e43248 100644
--- a/drivers/phy/qualcomm/phy-qcom-ufs-i.h
+++ b/drivers/phy/qualcomm/phy-qcom-ufs-i.h
@@ -17,9 +17,9 @@
#include <linux/module.h>
#include <linux/clk.h>
+#include <linux/phy/phy.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
-#include <linux/phy/phy-qcom-ufs.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/delay.h>
diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
index 75ee5906b966..3dc4501c6945 100644
--- a/drivers/scsi/ufs/ufs-qcom.c
+++ b/drivers/scsi/ufs/ufs-qcom.c
@@ -16,7 +16,6 @@
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/phy/phy.h>
-#include <linux/phy/phy-qcom-ufs.h>
#include "ufshcd.h"
#include "ufshcd-pltfrm.h"
@@ -189,22 +188,9 @@ static int ufs_qcom_init_lane_clks(struct ufs_qcom_host *host)
static int ufs_qcom_link_startup_post_change(struct ufs_hba *hba)
{
- struct ufs_qcom_host *host = ufshcd_get_variant(hba);
- struct phy *phy = host->generic_phy;
u32 tx_lanes;
- int err = 0;
-
- err = ufs_qcom_get_connected_tx_lanes(hba, &tx_lanes);
- if (err)
- goto out;
- err = ufs_qcom_phy_set_tx_lane_enable(phy, tx_lanes);
- if (err)
- dev_err(hba->dev, "%s: ufs_qcom_phy_set_tx_lane_enable failed\n",
- __func__);
-
-out:
- return err;
+ return ufs_qcom_get_connected_tx_lanes(hba, &tx_lanes);
}
static int ufs_qcom_check_hibern8(struct ufs_hba *hba)
@@ -932,10 +918,8 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba,
{
u32 val;
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
- struct phy *phy = host->generic_phy;
struct ufs_qcom_dev_params ufs_qcom_cap;
int ret = 0;
- int res = 0;
if (!dev_req_params) {
pr_err("%s: incoming dev_req_params is NULL\n", __func__);
@@ -1002,12 +986,6 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba,
}
val = ~(MAX_U32 << dev_req_params->lane_tx);
- res = ufs_qcom_phy_set_tx_lane_enable(phy, val);
- if (res) {
- dev_err(hba->dev, "%s: ufs_qcom_phy_set_tx_lane_enable() failed res = %d\n",
- __func__, res);
- ret = res;
- }
/* cache the power mode parameters to use internally */
memcpy(&host->dev_req_params,
@@ -1264,10 +1242,6 @@ static int ufs_qcom_init(struct ufs_hba *hba)
}
}
- /* update phy revision information before calling phy_init() */
- ufs_qcom_phy_save_controller_version(host->generic_phy,
- host->hw_ver.major, host->hw_ver.minor, host->hw_ver.step);
-
err = ufs_qcom_init_lane_clks(host);
if (err)
goto out_variant_clear;
diff --git a/drivers/scsi/ufs/ufs-qcom.h b/drivers/scsi/ufs/ufs-qcom.h
index 295f4bef6a0e..c114826316eb 100644
--- a/drivers/scsi/ufs/ufs-qcom.h
+++ b/drivers/scsi/ufs/ufs-qcom.h
@@ -129,11 +129,6 @@ enum {
MASK_CLK_NS_REG = 0xFFFC00,
};
-enum ufs_qcom_phy_init_type {
- UFS_PHY_INIT_FULL,
- UFS_PHY_INIT_CFG_RESTORE,
-};
-
/* QCOM UFS debug print bit mask */
#define UFS_QCOM_DBG_PRINT_REGS_EN BIT(0)
#define UFS_QCOM_DBG_PRINT_ICE_REGS_EN BIT(1)
diff --git a/include/linux/phy/phy-qcom-ufs.h b/include/linux/phy/phy-qcom-ufs.h
deleted file mode 100644
index 9dd85071bcce..000000000000
--- a/include/linux/phy/phy-qcom-ufs.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef PHY_QCOM_UFS_H_
-#define PHY_QCOM_UFS_H_
-
-#include "phy.h"
-
-int ufs_qcom_phy_set_tx_lane_enable(struct phy *phy, u32 tx_lanes);
-void ufs_qcom_phy_save_controller_version(struct phy *phy,
- u8 major, u16 minor, u16 step);
-
-#endif /* PHY_QCOM_UFS_H_ */
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2018-09-04 10:17 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-04 10:17 [PATCH 0/3] scsi: ufs-qcom: Remove all direct calls to qcom-ufs phy Vivek Gautam
2018-09-04 10:17 ` [PATCH 1/3] phy: qcom-ufs: Remove stale methods that handle ref clk Vivek Gautam
2018-09-24 17:23 ` Bjorn Andersson
2018-09-25 5:40 ` Vivek Gautam
2018-09-04 10:17 ` Vivek Gautam [this message]
2018-09-24 17:24 ` [PATCH 2/3] scsi/ufs: qcom: Remove ufs_qcom_phy_*() calls from host Bjorn Andersson
2018-09-25 9:52 ` Vivek Gautam
2018-09-26 0:28 ` Martin K. Petersen
2018-09-26 6:14 ` Vivek Gautam
2018-09-04 10:17 ` [PATCH 3/3] phy: qcom-ufs: Declare 20nm qcom ufs qmp phy as Broken Vivek Gautam
2018-09-24 17:29 ` Bjorn Andersson
2018-09-24 8:14 ` [PATCH 0/3] scsi: ufs-qcom: Remove all direct calls to qcom-ufs phy Vivek Gautam
2018-09-25 6:42 ` Kishon Vijay Abraham I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180904101719.18049-3-vivek.gautam@codeaurora.org \
--to=vivek.gautam@codeaurora.org \
--cc=bjorn.andersson@linaro.org \
--cc=evgreen@chromium.org \
--cc=jejb@linux.vnet.ibm.com \
--cc=kishon@ti.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=subhashj@codeaurora.org \
--cc=vinholikatti@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome