From: Nishanth Menon <nm@ti.com>
To: Tero Kristo <t-kristo@ti.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
Rob Herring <robh+dt@kernel.org>, <linux-kernel@vger.kernel.org>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
Tony Lindgren <tony@atomide.com>, Vignesh R <vigneshr@ti.com>,
Kishon Vijay Abraham I <kishon@ti.com>,
Nishanth Menon <nm@ti.com>
Subject: [PATCH 1/3] arm64: dts: ti: am654: Add uart nodes
Date: Wed, 5 Sep 2018 11:20:22 -0500 [thread overview]
Message-ID: <20180905162024.28243-2-nm@ti.com> (raw)
In-Reply-To: <20180905162024.28243-1-nm@ti.com>
Add uart nodes for AM654 device tree components.
Signed-off-by: Nishanth Menon <nm@ti.com>
---
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 30 ++++++++++++++++++++++++++
arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi | 18 ++++++++++++++++
arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi | 18 ++++++++++++++++
arch/arm64/boot/dts/ti/k3-am65.dtsi | 10 +++++++++
arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 5 +++++
5 files changed, 81 insertions(+)
create mode 100644 arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
create mode 100644 arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index faace3805c01..674a266066ca 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -28,4 +28,34 @@
#msi-cells = <1>;
};
};
+
+ main_uart0: serial@2800000 {
+ compatible = "ti,am654-uart";
+ reg = <0x00 0x02800000 0x00 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ current-speed = <115200>;
+ };
+
+ main_uart1: serial@2810000 {
+ compatible = "ti,am654-uart";
+ reg = <0x00 0x02810000 0x00 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ current-speed = <115200>;
+ };
+
+ main_uart2: serial@2820000 {
+ compatible = "ti,am654-uart";
+ reg = <0x00 0x02820000 0x00 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ current-speed = <115200>;
+ };
};
diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
new file mode 100644
index 000000000000..8c611d16df44
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM6 SoC Family MCU Domain peripherals
+ *
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+&cbass_mcu {
+ mcu_uart0: serial@40a00000 {
+ compatible = "ti,am654-uart";
+ reg = <0x00 0x40a00000 0x00 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <96000000>;
+ current-speed = <115200>;
+ };
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
new file mode 100644
index 000000000000..8b4378d4d0a3
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM6 SoC Family Wakeup Domain peripherals
+ *
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+&cbass_wakeup {
+ wkup_uart0: serial@42300000 {
+ compatible = "ti,am654-uart";
+ reg = <0x00 0x42300000 0x00 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ current-speed = <115200>;
+ };
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi
index ded364d20835..3d4bf369d030 100644
--- a/arch/arm64/boot/dts/ti/k3-am65.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi
@@ -16,6 +16,14 @@
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ serial0 = &wkup_uart0;
+ serial1 = &mcu_uart0;
+ serial2 = &main_uart0;
+ serial3 = &main_uart1;
+ serial4 = &main_uart2;
+ };
+
chosen { };
firmware {
@@ -85,3 +93,5 @@
/* Now include the peripherals for each bus segments */
#include "k3-am65-main.dtsi"
+#include "k3-am65-mcu.dtsi"
+#include "k3-am65-wakeup.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index af6956fdc13f..e146ac2ad781 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -34,3 +34,8 @@
};
};
};
+
+&wkup_uart0 {
+ /* Wakeup UART is used by System firmware */
+ status = "disabled";
+};
--
2.15.1
next prev parent reply other threads:[~2018-09-05 16:20 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-05 16:20 [PATCH 0/3] arm64: dts: ti: am654: Enable additional nodes Nishanth Menon
2018-09-05 16:20 ` Nishanth Menon [this message]
2018-09-05 16:20 ` [PATCH 2/3] arm64: dts: ti: am654: Add secure proxy instance for main domain Nishanth Menon
2018-09-05 16:20 ` [PATCH 3/3] arm64: dts: ti: k3-am6: Add Device Management Security Controller support Nishanth Menon
2018-09-05 20:33 ` [PATCH 0/3] arm64: dts: ti: am654: Enable additional nodes Tony Lindgren
2018-09-19 18:42 ` Tero Kristo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180905162024.28243-2-nm@ti.com \
--to=nm@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=t-kristo@ti.com \
--cc=tony@atomide.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome