From: Chen-Yu Tsai <wens@csie.org>
To: Thierry Reding <thierry.reding@gmail.com>,
David Airlie <airlied@linux.ie>, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Chen-Yu Tsai <wens@csie.org>,
devicetree@vger.kernel.org, dri-devel@lists.freedesktop.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com,
Jonathan Liu <net147@gmail.com>
Subject: [PATCH v2 4/6] drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panel
Date: Fri, 7 Sep 2018 12:19:46 +0800 [thread overview]
Message-ID: <20180907041948.19913-5-wens@csie.org> (raw)
In-Reply-To: <20180907041948.19913-1-wens@csie.org>
This panel is marketed as Banana Pi 7" LCD display. On the back is
a sticker denoting the model name S070WV20-CT16.
This is a 7" 800x480 panel connected through a 24-bit RGB interface.
However the panel only does 262k colors.
Depending on the variant, the PCB attached to the panel module either
supports DSI, or DSI + 24-bit RGB. DSI is converted to 24-bit RGB via
an onboard ICN6211 MIPI DSI - RGB bridge chip, then fed to the panel
itself.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
.../display/panel/bananapi,s070wv20-ct16.txt | 12 +++++++++
drivers/gpu/drm/panel/panel-simple.c | 25 +++++++++++++++++++
2 files changed, 37 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
diff --git a/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
new file mode 100644
index 000000000000..35bc0c839f49
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt
@@ -0,0 +1,12 @@
+Banana Pi 7" (S070WV20-CT16) TFT LCD Panel
+
+Required properties:
+- compatible: should be "bananapi,s070wv20-ct16"
+- power-supply: see ./panel-common.txt
+
+Optional properties:
+- enable-gpios: see ./simple-panel.txt
+- backlight: see ./simple-panel.txt
+
+This binding is compatible with the simple-panel binding, which is specified
+in ./simple-panel.txt.
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 97964f7f2ace..52d6ac572825 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -772,6 +772,28 @@ static const struct panel_desc avic_tm070ddh03 = {
},
};
+static const struct drm_display_mode bananapi_s070wv20_ct16_mode = {
+ .clock = 30000,
+ .hdisplay = 800,
+ .hsync_start = 800 + 40,
+ .hsync_end = 800 + 40 + 48,
+ .htotal = 800 + 40 + 48 + 40,
+ .vdisplay = 480,
+ .vsync_start = 480 + 13,
+ .vsync_end = 480 + 13 + 3,
+ .vtotal = 480 + 13 + 3 + 29,
+};
+
+static const struct panel_desc bananapi_s070wv20_ct16 = {
+ .modes = &bananapi_s070wv20_ct16_mode,
+ .num_modes = 1,
+ .bpc = 6,
+ .size = {
+ .width = 154,
+ .height = 86,
+ },
+};
+
static const struct drm_display_mode boe_hv070wsa_mode = {
.clock = 40800,
.hdisplay = 1024,
@@ -2369,6 +2391,9 @@ static const struct of_device_id platform_of_match[] = {
}, {
.compatible = "avic,tm070ddh03",
.data = &avic_tm070ddh03,
+ }, {
+ .compatible = "bananapi,s070wv20-ct16",
+ .data = &bananapi_s070wv20_ct16,
}, {
.compatible = "boe,hv070wsa-100",
.data = &boe_hv070wsa
--
2.19.0.rc1
next prev parent reply other threads:[~2018-09-07 4:28 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-07 4:19 [PATCH v2 0/6] drm/sun4i: Support color dithering for LCD panels Chen-Yu Tsai
2018-09-07 4:19 ` [PATCH v2 1/6] drm/sun4i: tcon: Pass drm_encoder * into sun4i_tcon0_mode_set_cpu Chen-Yu Tsai
2018-09-07 4:19 ` [PATCH v2 2/6] drm/sun4i: tcon: Rename Dithering related register macros Chen-Yu Tsai
2018-09-07 4:19 ` [PATCH v2 3/6] drm/sun4i: tcon: Add dithering support for RGB565/RGB666 LCD panels Chen-Yu Tsai
2018-09-07 4:19 ` Chen-Yu Tsai [this message]
2018-09-25 21:13 ` [PATCH v2 4/6] drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panel Rob Herring
2018-09-27 12:22 ` Thierry Reding
2018-09-07 4:19 ` [PATCH v2 5/6] ARM: dts: sun7i: add pinmux setting for RGB888 output for LCD0 Chen-Yu Tsai
2018-09-07 4:19 ` [PATCH v2 6/6] [DO NOT MERGE] ARM: dts: sun7i: bananapi-m1-plus: Enable Bananapi 7" 800x480 RGB LCD panel Chen-Yu Tsai
2018-09-07 11:23 ` [PATCH v2 0/6] drm/sun4i: Support color dithering for LCD panels Maxime Ripard
2018-09-12 8:58 ` Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180907041948.19913-5-wens@csie.org \
--to=wens@csie.org \
--cc=airlied@linux.ie \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@bootlin.com \
--cc=net147@gmail.com \
--cc=robh+dt@kernel.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®