From: Suzuki K Poulose <suzuki.poulose@arm.com>
To: linux-arm-kernel@lists.infradead.org
Cc: mathieu.poirier@linaro.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, robh@kernel.org,
frowand.list@gmail.com, coresight@lists.linaro.org,
leo.yan@linaro.org, suzuki.poulose@arm.com, orsonzhai@gmail.com,
zhang.lyra@gmail.com
Subject: [PATCH v2 04/11] arm64: dts: sc9836/sc9860: Update coresight bindings for hardware ports
Date: Wed, 12 Sep 2018 14:53:45 +0100 [thread overview]
Message-ID: <20180912135352.19722-5-suzuki.poulose@arm.com> (raw)
In-Reply-To: <20180912135352.19722-1-suzuki.poulose@arm.com>
Switch to the new coresight bindings for hw ports
Cc: orsonzhai@gmail.com
Cc: zhang.lyra@gmail.com
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
---
arch/arm64/boot/dts/sprd/sc9836.dtsi | 82 +++++-----
arch/arm64/boot/dts/sprd/sc9860.dtsi | 215 ++++++++++++++-------------
2 files changed, 153 insertions(+), 144 deletions(-)
diff --git a/arch/arm64/boot/dts/sprd/sc9836.dtsi b/arch/arm64/boot/dts/sprd/sc9836.dtsi
index 63894c456969..4bcdbb709c01 100644
--- a/arch/arm64/boot/dts/sprd/sc9836.dtsi
+++ b/arch/arm64/boot/dts/sprd/sc9836.dtsi
@@ -50,10 +50,11 @@
reg = <0 0x10003000 0 0x1000>;
clocks = <&clk26mhz>;
clock-names = "apb_pclk";
- port {
- etf_in: endpoint {
- slave-mode;
- remote-endpoint = <&funnel_out_port0>;
+ in-ports {
+ port {
+ etf_in: endpoint {
+ remote-endpoint = <&funnel_out_port0>;
+ };
};
};
};
@@ -63,55 +64,50 @@
reg = <0 0x10001000 0 0x1000>;
clocks = <&clk26mhz>;
clock-names = "apb_pclk";
- ports {
+
+ out-ports {
+ port {
+ funnel_out_port0: endpoint {
+ remote-endpoint = <&etf_in>;
+ };
+ };
+ };
+
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* funnel output port */
port@0 {
- reg = <0>;
- funnel_out_port0: endpoint {
- remote-endpoint = <&etf_in>;
- };
- };
-
- /* funnel input port 0-4 */
- port@1 {
reg = <0>;
funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&etm0_out>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&etm1_out>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
funnel_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&etm2_out>;
};
};
- port@4 {
+ port@3 {
reg = <3>;
funnel_in_port3: endpoint {
- slave-mode;
remote-endpoint = <&etm3_out>;
};
};
- port@5 {
+ port@4 {
reg = <4>;
funnel_in_port4: endpoint {
- slave-mode;
remote-endpoint = <&stm_out>;
};
};
@@ -126,9 +122,11 @@
cpu = <&cpu0>;
clocks = <&clk26mhz>;
clock-names = "apb_pclk";
- port {
- etm0_out: endpoint {
- remote-endpoint = <&funnel_in_port0>;
+ out-ports {
+ port {
+ etm0_out: endpoint {
+ remote-endpoint = <&funnel_in_port0>;
+ };
};
};
};
@@ -140,9 +138,11 @@
cpu = <&cpu1>;
clocks = <&clk26mhz>;
clock-names = "apb_pclk";
- port {
- etm1_out: endpoint {
- remote-endpoint = <&funnel_in_port1>;
+ out-ports {
+ port {
+ etm1_out: endpoint {
+ remote-endpoint = <&funnel_in_port1>;
+ };
};
};
};
@@ -154,9 +154,11 @@
cpu = <&cpu2>;
clocks = <&clk26mhz>;
clock-names = "apb_pclk";
- port {
- etm2_out: endpoint {
- remote-endpoint = <&funnel_in_port2>;
+ out-ports {
+ port {
+ etm2_out: endpoint {
+ remote-endpoint = <&funnel_in_port2>;
+ };
};
};
};
@@ -168,9 +170,11 @@
cpu = <&cpu3>;
clocks = <&clk26mhz>;
clock-names = "apb_pclk";
- port {
- etm3_out: endpoint {
- remote-endpoint = <&funnel_in_port3>;
+ out-ports {
+ port {
+ etm3_out: endpoint {
+ remote-endpoint = <&funnel_in_port3>;
+ };
};
};
};
@@ -182,9 +186,11 @@
reg-names = "stm-base", "stm-stimulus-base";
clocks = <&clk26mhz>;
clock-names = "apb_pclk";
- port {
- stm_out: endpoint {
- remote-endpoint = <&funnel_in_port4>;
+ out-ports {
+ port {
+ stm_out: endpoint {
+ remote-endpoint = <&funnel_in_port4>;
+ };
};
};
};
diff --git a/arch/arm64/boot/dts/sprd/sc9860.dtsi b/arch/arm64/boot/dts/sprd/sc9860.dtsi
index 48f5928ed45c..5f57bf055cde 100644
--- a/arch/arm64/boot/dts/sprd/sc9860.dtsi
+++ b/arch/arm64/boot/dts/sprd/sc9860.dtsi
@@ -304,30 +304,29 @@
reg = <0 0x10001000 0 0x1000>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
soc_funnel_out_port: endpoint {
remote-endpoint = <&etb_in>;
};
};
+ };
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
soc_funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint =
<&main_funnel_out_port>;
};
};
- port@2 {
+ port@4 {
reg = <4>;
soc_funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint =
<&stm_out_port>;
};
@@ -340,11 +339,12 @@
reg = <0 0x10003000 0 0x1000>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- etb_in: endpoint {
- slave-mode;
- remote-endpoint =
- <&soc_funnel_out_port>;
+ out-ports {
+ port {
+ etb_in: endpoint {
+ remote-endpoint =
+ <&soc_funnel_out_port>;
+ };
};
};
};
@@ -356,10 +356,12 @@
reg-names = "stm-base", "stm-stimulus-base";
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- stm_out_port: endpoint {
- remote-endpoint =
- <&soc_funnel_in_port1>;
+ out-ports {
+ port {
+ stm_out_port: endpoint {
+ remote-endpoint =
+ <&soc_funnel_in_port1>;
+ };
};
};
};
@@ -369,38 +371,36 @@
reg = <0 0x11001000 0 0x1000>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
cluster0_funnel_out_port: endpoint {
remote-endpoint =
<&cluster0_etf_in>;
};
};
+ };
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
cluster0_funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&etm0_out>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
cluster0_funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&etm1_out>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
cluster0_funnel_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&etm2_out>;
};
};
@@ -408,7 +408,6 @@
port@4 {
reg = <4>;
cluster0_funnel_in_port3: endpoint {
- slave-mode;
remote-endpoint = <&etm3_out>;
};
};
@@ -420,46 +419,43 @@
reg = <0 0x11002000 0 0x1000>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
cluster1_funnel_out_port: endpoint {
remote-endpoint =
<&cluster1_etf_in>;
};
};
+ };
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
cluster1_funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&etm4_out>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
cluster1_funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&etm5_out>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
cluster1_funnel_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&etm6_out>;
};
};
- port@4 {
+ port@3 {
reg = <3>;
cluster1_funnel_in_port3: endpoint {
- slave-mode;
remote-endpoint = <&etm7_out>;
};
};
@@ -472,22 +468,18 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
cluster0_etf_out: endpoint {
remote-endpoint =
<&main_funnel_in_port0>;
};
};
+ };
- port@1 {
- reg = <0>;
+ in-ports {
+ port {
cluster0_etf_in: endpoint {
- slave-mode;
remote-endpoint =
<&cluster0_funnel_out_port>;
};
@@ -501,22 +493,18 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
cluster1_etf_out: endpoint {
remote-endpoint =
<&main_funnel_in_port1>;
};
};
+ };
- port@1 {
- reg = <0>;
+ in-ports {
+ port {
cluster1_etf_in: endpoint {
- slave-mode;
remote-endpoint =
<&cluster1_funnel_out_port>;
};
@@ -530,31 +518,30 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
main_funnel_out_port: endpoint {
remote-endpoint =
<&soc_funnel_in_port0>;
};
};
+ };
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
main_funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint =
<&cluster0_etf_out>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
main_funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint =
<&cluster1_etf_out>;
};
@@ -569,10 +556,12 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- etm0_out: endpoint {
- remote-endpoint =
- <&cluster0_funnel_in_port0>;
+ out-ports {
+ port {
+ etm0_out: endpoint {
+ remote-endpoint =
+ <&cluster0_funnel_in_port0>;
+ };
};
};
};
@@ -584,10 +573,12 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- etm1_out: endpoint {
- remote-endpoint =
- <&cluster0_funnel_in_port1>;
+ out-ports {
+ port {
+ etm1_out: endpoint {
+ remote-endpoint =
+ <&cluster0_funnel_in_port1>;
+ };
};
};
};
@@ -599,10 +590,12 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- etm2_out: endpoint {
- remote-endpoint =
- <&cluster0_funnel_in_port2>;
+ out-ports {
+ port {
+ etm2_out: endpoint {
+ remote-endpoint =
+ <&cluster0_funnel_in_port2>;
+ };
};
};
};
@@ -614,10 +607,12 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- etm3_out: endpoint {
- remote-endpoint =
- <&cluster0_funnel_in_port3>;
+ out-ports {
+ port {
+ etm3_out: endpoint {
+ remote-endpoint =
+ <&cluster0_funnel_in_port3>;
+ };
};
};
};
@@ -629,10 +624,12 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- etm4_out: endpoint {
- remote-endpoint =
- <&cluster1_funnel_in_port0>;
+ out-ports {
+ port {
+ etm4_out: endpoint {
+ remote-endpoint =
+ <&cluster1_funnel_in_port0>;
+ };
};
};
};
@@ -644,10 +641,12 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- etm5_out: endpoint {
- remote-endpoint =
- <&cluster1_funnel_in_port1>;
+ out-ports {
+ port {
+ etm5_out: endpoint {
+ remote-endpoint =
+ <&cluster1_funnel_in_port1>;
+ };
};
};
};
@@ -659,10 +658,12 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- etm6_out: endpoint {
- remote-endpoint =
- <&cluster1_funnel_in_port2>;
+ out-ports {
+ port {
+ etm6_out: endpoint {
+ remote-endpoint =
+ <&cluster1_funnel_in_port2>;
+ };
};
};
};
@@ -674,10 +675,12 @@
clocks = <&ext_26m>;
clock-names = "apb_pclk";
- port {
- etm7_out: endpoint {
- remote-endpoint =
- <&cluster1_funnel_in_port3>;
+ out-ports {
+ port {
+ etm7_out: endpoint {
+ remote-endpoint =
+ <&cluster1_funnel_in_port3>;
+ };
};
};
};
--
2.19.0
next prev parent reply other threads:[~2018-09-12 13:54 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-12 13:53 [PATCH v2 00/11] dts: Update coresight device tree bindings Suzuki K Poulose
2018-09-12 13:53 ` [PATCH v2 01/11] coresight: dts: binding: Fix example for TPIU component Suzuki K Poulose
2018-09-26 20:30 ` Rob Herring
2018-09-12 13:53 ` [PATCH v2 02/11] coresight: dts: binding: Update coresight binding examples Suzuki K Poulose
2018-09-12 13:53 ` [PATCH v2 03/11] arm64: dts: hi6220: Update coresight bindings for hardware ports Suzuki K Poulose
2018-09-21 14:06 ` Wei Xu
2018-09-12 13:53 ` Suzuki K Poulose [this message]
2018-09-27 8:51 ` [PATCH v2 04/11] arm64: dts: sc9836/sc9860: " Suzuki K Poulose
2018-09-27 9:18 ` Chunyan Zhang
2018-09-28 10:45 ` Arnd Bergmann
2018-09-28 11:09 ` Chunyan Zhang
2018-09-12 13:53 ` [PATCH v2 05/11] arm64: dts: msm8916: " Suzuki K Poulose
2018-09-27 8:18 ` Suzuki K Poulose
2018-09-30 17:12 ` Andy Gross
2018-09-12 13:53 ` [PATCH v2 06/11] arm: dts: hip04: " Suzuki K Poulose
2018-09-21 14:06 ` Wei Xu
2018-09-12 13:53 ` [PATCH v2 07/11] arm: dts: imx7: Update coresight binding " Suzuki K Poulose
2018-09-26 2:24 ` Shawn Guo
2018-09-12 13:53 ` [PATCH v2 08/11] arm: dts: omap: Update coresight bindings " Suzuki K Poulose
2018-09-20 22:01 ` Tony Lindgren
2018-09-12 13:53 ` [PATCH v2 09/11] arm: dts: qcom: " Suzuki K Poulose
2018-09-12 13:53 ` [PATCH v2 10/11] arm: dts: sama5d2: " Suzuki K Poulose
2018-09-19 17:12 ` Alexandre Belloni
2018-09-12 13:53 ` [PATCH v2 11/11] arm: dts: ste-dbx5x0: Update coresight bindings for hardware port Suzuki K Poulose
2018-09-14 8:43 ` Linus Walleij
2018-09-14 8:58 ` Suzuki K Poulose
2018-09-20 22:02 ` Linus Walleij
2018-09-21 9:24 ` Suzuki K Poulose
2018-09-19 23:29 ` [PATCH v2 00/11] dts: Update coresight device tree bindings Mathieu Poirier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180912135352.19722-5-suzuki.poulose@arm.com \
--to=suzuki.poulose@arm.com \
--cc=coresight@lists.linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=frowand.list@gmail.com \
--cc=leo.yan@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=orsonzhai@gmail.com \
--cc=robh@kernel.org \
--cc=zhang.lyra@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®