From: Oscar Salvador <osalvador@techadventures.net>
To: akpm@linux-foundation.org
Cc: mhocko@suse.com, dan.j.williams@intel.com, david@redhat.com,
Pavel.Tatashin@microsoft.com, Jonathan.Cameron@huawei.com,
yasu.isimatu@gmail.com, malat@debian.org, linux-mm@kvack.org,
linux-kernel@vger.kernel.org, Oscar Salvador <osalvador@suse.de>
Subject: [PATCH 5/5] mm/memory_hotplug: Clean up node_states_check_changes_offline
Date: Wed, 19 Sep 2018 12:08:19 +0200 [thread overview]
Message-ID: <20180919100819.25518-6-osalvador@techadventures.net> (raw)
In-Reply-To: <20180919100819.25518-1-osalvador@techadventures.net>
From: Oscar Salvador <osalvador@suse.de>
This patch, as the previous one, gets rid of the wrong if statements.
While at it, I realized that the comments are sometimes very confusing,
to say the least, and wrong.
For example:
---
zone_last = ZONE_MOVABLE;
/*
* check whether node_states[N_HIGH_MEMORY] will be changed
* If we try to offline the last present @nr_pages from the node,
* we can determind we will need to clear the node from
* node_states[N_HIGH_MEMORY].
*/
for (; zt <= zone_last; zt++)
present_pages += pgdat->node_zones[zt].present_pages;
if (nr_pages >= present_pages)
arg->status_change_nid = zone_to_nid(zone);
else
arg->status_change_nid = -1;
---
In case the node gets empry, it must be removed from N_MEMORY.
We already check N_HIGH_MEMORY a bit above within the CONFIG_HIGHMEM
ifdef code.
Not to say that status_change_nid is for N_MEMORY, and not for
N_HIGH_MEMORY.
So I re-wrote some of the comments to what I think is better.
Signed-off-by: Oscar Salvador <osalvador@suse.de>
---
mm/memory_hotplug.c | 71 +++++++++++++++++++++--------------------------------
1 file changed, 28 insertions(+), 43 deletions(-)
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index ab3c1de18c5d..15ecf3d7a554 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -1485,51 +1485,36 @@ static void node_states_check_changes_offline(unsigned long nr_pages,
{
struct pglist_data *pgdat = zone->zone_pgdat;
unsigned long present_pages = 0;
- enum zone_type zt, zone_last = ZONE_NORMAL;
+ enum zone_type zt;
/*
- * If we have HIGHMEM or movable node, node_states[N_NORMAL_MEMORY]
- * contains nodes which have zones of 0...ZONE_NORMAL,
- * set zone_last to ZONE_NORMAL.
- *
- * If we don't have HIGHMEM nor movable node,
- * node_states[N_NORMAL_MEMORY] contains nodes which have zones of
- * 0...ZONE_MOVABLE, set zone_last to ZONE_MOVABLE.
+ * Check whether node_states[N_NORMAL_MEMORY] will be changed.
+ * If the memory to be offline is within the range
+ * [0..ZONE_NORMAL], and it is the last present memory there,
+ * the zones in that range will become empty after the offlining,
+ * thus we can determine that we need to clear the node from
+ * node_states[N_NORMAL_MEMORY].
*/
- if (N_MEMORY == N_NORMAL_MEMORY)
- zone_last = ZONE_MOVABLE;
-
- /*
- * check whether node_states[N_NORMAL_MEMORY] will be changed.
- * If the memory to be offline is in a zone of 0...zone_last,
- * and it is the last present memory, 0...zone_last will
- * become empty after offline , thus we can determind we will
- * need to clear the node from node_states[N_NORMAL_MEMORY].
- */
- for (zt = 0; zt <= zone_last; zt++)
+ for (zt = 0; zt <= ZONE_NORMAL; zt++)
present_pages += pgdat->node_zones[zt].present_pages;
- if (zone_idx(zone) <= zone_last && nr_pages >= present_pages)
+ if (zone_idx(zone) <= ZONE_NORMAL && nr_pages >= present_pages)
arg->status_change_nid_normal = zone_to_nid(zone);
else
arg->status_change_nid_normal = -1;
#ifdef CONFIG_HIGHMEM
/*
- * If we have movable node, node_states[N_HIGH_MEMORY]
- * contains nodes which have zones of 0...ZONE_HIGHMEM,
- * set zone_last to ZONE_HIGHMEM.
- *
- * If we don't have movable node, node_states[N_NORMAL_MEMORY]
- * contains nodes which have zones of 0...ZONE_MOVABLE,
- * set zone_last to ZONE_MOVABLE.
+ * node_states[N_HIGH_MEMORY] contains nodes which
+ * have normal memory or high memory.
+ * Here we add the present_pages belonging to ZONE_HIGHMEM.
+ * If the zone is within the range of [0..ZONE_HIGHMEM), and
+ * we determine that the zones in that range become empty,
+ * we need to clear the node for N_HIGH_MEMORY.
*/
- zone_last = ZONE_HIGHMEM;
- if (N_MEMORY == N_HIGH_MEMORY)
- zone_last = ZONE_MOVABLE;
+ zt = ZONE_HIGHMEM;
+ present_pages += pgdat->node_zones[zt].present_pages;
- for (; zt <= zone_last; zt++)
- present_pages += pgdat->node_zones[zt].present_pages;
- if (zone_idx(zone) <= zone_last && nr_pages >= present_pages)
+ if (zone_idx(zone) <= zt && nr_pages >= present_pages)
arg->status_change_nid_high = zone_to_nid(zone);
else
arg->status_change_nid_high = -1;
@@ -1542,18 +1527,18 @@ static void node_states_check_changes_offline(unsigned long nr_pages,
#endif
/*
- * node_states[N_HIGH_MEMORY] contains nodes which have 0...ZONE_MOVABLE
+ * We have accounted the pages from [0..ZONE_NORMAL), and
+ * in case of CONFIG_HIGHMEM the pages from ZONE_HIGHMEM
+ * as well.
+ * Here we count the possible pages from ZONE_MOVABLE.
+ * If after having accounted all the pages, we see that the nr_pages
+ * to be offlined is over or equal to the accounted pages,
+ * we know that the node will become empty, and so, we can clear
+ * it for N_MEMORY as well.
*/
- zone_last = ZONE_MOVABLE;
+ zt = ZONE_MOVABLE;
+ present_pages += pgdat->node_zones[zt].present_pages;
- /*
- * check whether node_states[N_HIGH_MEMORY] will be changed
- * If we try to offline the last present @nr_pages from the node,
- * we can determind we will need to clear the node from
- * node_states[N_HIGH_MEMORY].
- */
- for (; zt <= zone_last; zt++)
- present_pages += pgdat->node_zones[zt].present_pages;
if (nr_pages >= present_pages)
arg->status_change_nid = zone_to_nid(zone);
else
--
2.13.6
next prev parent reply other threads:[~2018-09-19 10:08 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-19 10:08 [PATCH 0/5] Refactor node_states_check_changes_online/offline Oscar Salvador
2018-09-19 10:08 ` [PATCH 1/5] mm/memory_hotplug: Spare unnecessary calls to node_set_state Oscar Salvador
2018-09-20 20:53 ` Pasha Tatashin
2018-09-19 10:08 ` [PATCH 2/5] mm/memory_hotplug: Avoid node_set/clear_state(N_HIGH_MEMORY) when !CONFIG_HIGHMEM Oscar Salvador
2018-09-20 20:59 ` Pasha Tatashin
2018-09-21 10:31 ` Oscar Salvador
2018-09-19 10:08 ` [PATCH 3/5] mm/memory_hotplug: Tidy up node_states_clear_node Oscar Salvador
2018-09-20 23:40 ` Pasha Tatashin
2018-09-19 10:08 ` [PATCH 4/5] mm/memory_hotplug: Simplify node_states_check_changes_online Oscar Salvador
2018-09-21 0:15 ` Pasha Tatashin
2018-09-21 10:30 ` Oscar Salvador
2018-09-19 10:08 ` Oscar Salvador [this message]
2018-09-21 0:38 ` [PATCH 5/5] mm/memory_hotplug: Clean up node_states_check_changes_offline Pasha Tatashin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180919100819.25518-6-osalvador@techadventures.net \
--to=osalvador@techadventures.net \
--cc=Jonathan.Cameron@huawei.com \
--cc=Pavel.Tatashin@microsoft.com \
--cc=akpm@linux-foundation.org \
--cc=dan.j.williams@intel.com \
--cc=david@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=malat@debian.org \
--cc=mhocko@suse.com \
--cc=osalvador@suse.de \
--cc=yasu.isimatu@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®