From: Salil Mehta <salil.mehta@huawei.com>
To: <davem@davemloft.net>
Cc: <salil.mehta@huawei.com>, <yisen.zhuang@huawei.com>,
<lipeng321@huawei.com>, <mehta.salil@opnsrc.net>,
<netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linuxarm@huawei.com>, Jian Shen <shenjian15@huawei.com>
Subject: [PATCH net-next 10/12] net: hns3: Clear client pointer when initialize client failed or unintialize finished
Date: Wed, 19 Sep 2018 18:29:56 +0100 [thread overview]
Message-ID: <20180919172958.12992-11-salil.mehta@huawei.com> (raw)
In-Reply-To: <20180919172958.12992-1-salil.mehta@huawei.com>
From: Jian Shen <shenjian15@huawei.com>
If initialize client failed or finish uninitializing client, we should
clear the client pointer. It may cause unexpected result when use
uninitialized client. Meanwhile, we also should check whether client
exist when uninitialize it.
Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
---
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 25 ++++++++++------
.../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 33 ++++++++++++++++------
2 files changed, 41 insertions(+), 17 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 8a50688..141da18 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -5162,13 +5162,13 @@ static int hclge_init_client_instance(struct hnae3_client *client,
vport->nic.client = client;
ret = client->ops->init_instance(&vport->nic);
if (ret)
- return ret;
+ goto clear_nic;
ret = hclge_init_instance_hw(hdev);
if (ret) {
client->ops->uninit_instance(&vport->nic,
0);
- return ret;
+ goto clear_nic;
}
if (hdev->roce_client &&
@@ -5177,11 +5177,11 @@ static int hclge_init_client_instance(struct hnae3_client *client,
ret = hclge_init_roce_base_info(vport);
if (ret)
- return ret;
+ goto clear_roce;
ret = rc->ops->init_instance(&vport->roce);
if (ret)
- return ret;
+ goto clear_roce;
}
break;
@@ -5191,7 +5191,7 @@ static int hclge_init_client_instance(struct hnae3_client *client,
ret = client->ops->init_instance(&vport->nic);
if (ret)
- return ret;
+ goto clear_nic;
break;
case HNAE3_CLIENT_ROCE:
@@ -5203,16 +5203,25 @@ static int hclge_init_client_instance(struct hnae3_client *client,
if (hdev->roce_client && hdev->nic_client) {
ret = hclge_init_roce_base_info(vport);
if (ret)
- return ret;
+ goto clear_roce;
ret = client->ops->init_instance(&vport->roce);
if (ret)
- return ret;
+ goto clear_roce;
}
}
}
return 0;
+
+clear_nic:
+ hdev->nic_client = NULL;
+ vport->nic.client = NULL;
+ return ret;
+clear_roce:
+ hdev->roce_client = NULL;
+ vport->roce.client = NULL;
+ return ret;
}
static void hclge_uninit_client_instance(struct hnae3_client *client,
@@ -5232,7 +5241,7 @@ static void hclge_uninit_client_instance(struct hnae3_client *client,
}
if (client->type == HNAE3_CLIENT_ROCE)
return;
- if (client->ops->uninit_instance) {
+ if (hdev->nic_client && client->ops->uninit_instance) {
hclge_uninit_instance_hw(hdev);
client->ops->uninit_instance(&vport->nic, 0);
hdev->nic_client = NULL;
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
index 320043e..88cff5f 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
@@ -1624,17 +1624,17 @@ static int hclgevf_init_client_instance(struct hnae3_client *client,
ret = client->ops->init_instance(&hdev->nic);
if (ret)
- return ret;
+ goto clear_nic;
if (hdev->roce_client && hnae3_dev_roce_supported(hdev)) {
struct hnae3_client *rc = hdev->roce_client;
ret = hclgevf_init_roce_base_info(hdev);
if (ret)
- return ret;
+ goto clear_roce;
ret = rc->ops->init_instance(&hdev->roce);
if (ret)
- return ret;
+ goto clear_roce;
}
break;
case HNAE3_CLIENT_UNIC:
@@ -1643,7 +1643,7 @@ static int hclgevf_init_client_instance(struct hnae3_client *client,
ret = client->ops->init_instance(&hdev->nic);
if (ret)
- return ret;
+ goto clear_nic;
break;
case HNAE3_CLIENT_ROCE:
if (hnae3_dev_roce_supported(hdev)) {
@@ -1654,15 +1654,24 @@ static int hclgevf_init_client_instance(struct hnae3_client *client,
if (hdev->roce_client && hdev->nic_client) {
ret = hclgevf_init_roce_base_info(hdev);
if (ret)
- return ret;
+ goto clear_roce;
ret = client->ops->init_instance(&hdev->roce);
if (ret)
- return ret;
+ goto clear_roce;
}
}
return 0;
+
+clear_nic:
+ hdev->nic_client = NULL;
+ hdev->nic.client = NULL;
+ return ret;
+clear_roce:
+ hdev->roce_client = NULL;
+ hdev->roce.client = NULL;
+ return ret;
}
static void hclgevf_uninit_client_instance(struct hnae3_client *client,
@@ -1671,13 +1680,19 @@ static void hclgevf_uninit_client_instance(struct hnae3_client *client,
struct hclgevf_dev *hdev = ae_dev->priv;
/* un-init roce, if it exists */
- if (hdev->roce_client)
+ if (hdev->roce_client) {
hdev->roce_client->ops->uninit_instance(&hdev->roce, 0);
+ hdev->roce_client = NULL;
+ hdev->roce.client = NULL;
+ }
/* un-init nic/unic, if this was not called by roce client */
- if ((client->ops->uninit_instance) &&
- (client->type != HNAE3_CLIENT_ROCE))
+ if (client->ops->uninit_instance && hdev->nic_client &&
+ client->type != HNAE3_CLIENT_ROCE) {
client->ops->uninit_instance(&hdev->nic, 0);
+ hdev->nic_client = NULL;
+ hdev->nic.client = NULL;
+ }
}
static int hclgevf_pci_init(struct hclgevf_dev *hdev)
--
2.7.4
next prev parent reply other threads:[~2018-09-19 17:31 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-19 17:29 [PATCH net-next 00/12] Fixes, cleanups & minor additions to HNS3 driver Salil Mehta
2018-09-19 17:29 ` [PATCH net-next 01/12] net: hns3: Add default irq affinity Salil Mehta
2018-09-19 17:29 ` [PATCH net-next 02/12] net: hns3: Add unlikely for buf_num check Salil Mehta
2018-09-19 17:29 ` [PATCH net-next 03/12] net: hns3: Remove tx budget to clean more TX descriptors in a napi Salil Mehta
2018-09-19 17:29 ` [PATCH net-next 04/12] net: hns3: Remove packet statistics of public Salil Mehta
2018-09-19 17:29 ` [PATCH net-next 05/12] net: hns3: Add support for hns3_nic_netdev_ops.ndo_do_ioctl Salil Mehta
2018-09-19 17:29 ` [PATCH net-next 06/12] net: hns3: Set STATE_DOWN bit of hdev state when stopping net Salil Mehta
2018-09-19 17:29 ` [PATCH net-next 07/12] net: hns3: Check hdev state when getting link status Salil Mehta
2018-09-19 17:29 ` [PATCH net-next 08/12] net: hns3: Fix for setting speed for phy failed problem Salil Mehta
2018-09-19 17:29 ` [PATCH net-next 09/12] net: hns3: Fix cmdq registers initialization issue for vf Salil Mehta
2018-09-19 17:29 ` Salil Mehta [this message]
2018-09-19 17:29 ` [PATCH net-next 11/12] net: hns3: Fix client initialize state issue when roce client initialize failed Salil Mehta
2018-09-19 17:29 ` [PATCH net-next 12/12] net: hns3: Fix parameter type for q_id in hclge_tm_q_to_qs_map_cfg() Salil Mehta
2018-09-20 4:21 ` [PATCH net-next 00/12] Fixes, cleanups & minor additions to HNS3 driver David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180919172958.12992-11-salil.mehta@huawei.com \
--to=salil.mehta@huawei.com \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=lipeng321@huawei.com \
--cc=mehta.salil@opnsrc.net \
--cc=netdev@vger.kernel.org \
--cc=shenjian15@huawei.com \
--cc=yisen.zhuang@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®