From: Sasha Levin <Alexander.Levin@microsoft.com>
To: "stable@vger.kernel.org" <stable@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Cc: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>,
Sasha Levin <Alexander.Levin@microsoft.com>
Subject: [PATCH AUTOSEL 4.18 27/56] ice: Fix multiple static analyser warnings
Date: Thu, 20 Sep 2018 02:47:46 +0000 [thread overview]
Message-ID: <20180920024716.58490-27-alexander.levin@microsoft.com> (raw)
In-Reply-To: <20180920024716.58490-1-alexander.levin@microsoft.com>
From: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
[ Upstream commit 4381147df9098706caa5cf9fda37e53b2fe4871f ]
This patch fixes the following smatch errors:
1) Fix "odd binop '0x0 & 0xc'" when performing the bitwise-and with a
constant value of zero (ICE_AQC_GSET_RSS_LUT_TABLE_SIZE_128_FLAG).
Remove a similar bitwise-and with 0 in ice_add_marker_act() and use the
right mask ICE_LG_ACT_GENERIC_OFFSET_M in the expression.
2) Fix a similar issue "odd binop '0x0 & 0x1800' in ice_req_irq_msix_misc.
3) Fix "odd binop '0x380000 & 0x7fff8'" in ice_add_marker_act(). Also, use
a new define ICE_LG_ACT_GENERIC_OFF_RX_DESC_PROF_IDX instead of magic
number '7'.
4) Fix warn: odd binop '0x0 & 0x18' in ice_set_dflt_vsi_ctx() by removing
unnecessary logic to explicitly unset bits 3 and 4 in port_vlan_bits.
These bits are unset already by the memset on ctxt->info.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
.../net/ethernet/intel/ice/ice_adminq_cmd.h | 1 +
drivers/net/ethernet/intel/ice/ice_common.c | 25 +++++++++++--------
drivers/net/ethernet/intel/ice/ice_main.c | 19 ++++++--------
drivers/net/ethernet/intel/ice/ice_switch.c | 4 +--
4 files changed, 25 insertions(+), 24 deletions(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h b/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h
index 7541ec2270b3..6d3e11659ba5 100644
--- a/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h
+++ b/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h
@@ -594,6 +594,7 @@ struct ice_sw_rule_lg_act {
#define ICE_LG_ACT_GENERIC_OFFSET_M (0x7 << ICE_LG_ACT_GENERIC_OFFSET_S)
#define ICE_LG_ACT_GENERIC_PRIORITY_S 22
#define ICE_LG_ACT_GENERIC_PRIORITY_M (0x7 << ICE_LG_ACT_GENERIC_PRIORITY_S)
+#define ICE_LG_ACT_GENERIC_OFF_RX_DESC_PROF_IDX 7
/* Action = 7 - Set Stat count */
#define ICE_LG_ACT_STAT_COUNT 0x7
diff --git a/drivers/net/ethernet/intel/ice/ice_common.c b/drivers/net/ethernet/intel/ice/ice_common.c
index 71d032cc5fa7..d5300b606d5a 100644
--- a/drivers/net/ethernet/intel/ice/ice_common.c
+++ b/drivers/net/ethernet/intel/ice/ice_common.c
@@ -1619,20 +1619,23 @@ __ice_aq_get_set_rss_lut(struct ice_hw *hw, u16 vsi_id, u8 lut_type, u8 *lut,
}
/* LUT size is only valid for Global and PF table types */
- if (lut_size == ICE_AQC_GSET_RSS_LUT_TABLE_SIZE_128) {
- flags |= (ICE_AQC_GSET_RSS_LUT_TABLE_SIZE_128_FLAG <<
- ICE_AQC_GSET_RSS_LUT_TABLE_SIZE_S) &
- ICE_AQC_GSET_RSS_LUT_TABLE_SIZE_M;
- } else if (lut_size == ICE_AQC_GSET_RSS_LUT_TABLE_SIZE_512) {
+ switch (lut_size) {
+ case ICE_AQC_GSET_RSS_LUT_TABLE_SIZE_128:
+ break;
+ case ICE_AQC_GSET_RSS_LUT_TABLE_SIZE_512:
flags |= (ICE_AQC_GSET_RSS_LUT_TABLE_SIZE_512_FLAG <<
ICE_AQC_GSET_RSS_LUT_TABLE_SIZE_S) &
ICE_AQC_GSET_RSS_LUT_TABLE_SIZE_M;
- } else if ((lut_size == ICE_AQC_GSET_RSS_LUT_TABLE_SIZE_2K) &&
- (lut_type == ICE_AQC_GSET_RSS_LUT_TABLE_TYPE_PF)) {
- flags |= (ICE_AQC_GSET_RSS_LUT_TABLE_SIZE_2K_FLAG <<
- ICE_AQC_GSET_RSS_LUT_TABLE_SIZE_S) &
- ICE_AQC_GSET_RSS_LUT_TABLE_SIZE_M;
- } else {
+ break;
+ case ICE_AQC_GSET_RSS_LUT_TABLE_SIZE_2K:
+ if (lut_type == ICE_AQC_GSET_RSS_LUT_TABLE_TYPE_PF) {
+ flags |= (ICE_AQC_GSET_RSS_LUT_TABLE_SIZE_2K_FLAG <<
+ ICE_AQC_GSET_RSS_LUT_TABLE_SIZE_S) &
+ ICE_AQC_GSET_RSS_LUT_TABLE_SIZE_M;
+ break;
+ }
+ /* fall-through */
+ default:
status = ICE_ERR_PARAM;
goto ice_aq_get_set_rss_lut_exit;
}
diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index 5299caf55a7f..186e764a469a 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -1352,14 +1352,13 @@ static void ice_set_dflt_vsi_ctx(struct ice_vsi_ctx *ctxt)
ctxt->info.sw_flags = ICE_AQ_VSI_SW_FLAG_SRC_PRUNE;
/* Traffic from VSI can be sent to LAN */
ctxt->info.sw_flags2 = ICE_AQ_VSI_SW_FLAG_LAN_ENA;
- /* Allow all packets untagged/tagged */
+ /* By default bits 3 and 4 in port_vlan_flags are 0's which results in
+ * legacy behavior (show VLAN, DEI, and UP) in descriptor. Also, allow
+ * all packets untagged/tagged.
+ */
ctxt->info.port_vlan_flags = ((ICE_AQ_VSI_PVLAN_MODE_ALL &
ICE_AQ_VSI_PVLAN_MODE_M) >>
ICE_AQ_VSI_PVLAN_MODE_S);
- /* Show VLAN/UP from packets in Rx descriptors */
- ctxt->info.port_vlan_flags |= ((ICE_AQ_VSI_PVLAN_EMOD_STR_BOTH &
- ICE_AQ_VSI_PVLAN_EMOD_M) >>
- ICE_AQ_VSI_PVLAN_EMOD_S);
/* Have 1:1 UP mapping for both ingress/egress tables */
table |= ICE_UP_TABLE_TRANSLATE(0, 0);
table |= ICE_UP_TABLE_TRANSLATE(1, 1);
@@ -2058,15 +2057,13 @@ static int ice_req_irq_msix_misc(struct ice_pf *pf)
skip_req_irq:
ice_ena_misc_vector(pf);
- val = (pf->oicr_idx & PFINT_OICR_CTL_MSIX_INDX_M) |
- (ICE_RX_ITR & PFINT_OICR_CTL_ITR_INDX_M) |
- PFINT_OICR_CTL_CAUSE_ENA_M;
+ val = ((pf->oicr_idx & PFINT_OICR_CTL_MSIX_INDX_M) |
+ PFINT_OICR_CTL_CAUSE_ENA_M);
wr32(hw, PFINT_OICR_CTL, val);
/* This enables Admin queue Interrupt causes */
- val = (pf->oicr_idx & PFINT_FW_CTL_MSIX_INDX_M) |
- (ICE_RX_ITR & PFINT_FW_CTL_ITR_INDX_M) |
- PFINT_FW_CTL_CAUSE_ENA_M;
+ val = ((pf->oicr_idx & PFINT_FW_CTL_MSIX_INDX_M) |
+ PFINT_FW_CTL_CAUSE_ENA_M);
wr32(hw, PFINT_FW_CTL, val);
itr_gran = hw->itr_gran_200;
diff --git a/drivers/net/ethernet/intel/ice/ice_switch.c b/drivers/net/ethernet/intel/ice/ice_switch.c
index 723d15f1e90b..6b7ec2ae5ad6 100644
--- a/drivers/net/ethernet/intel/ice/ice_switch.c
+++ b/drivers/net/ethernet/intel/ice/ice_switch.c
@@ -645,14 +645,14 @@ ice_add_marker_act(struct ice_hw *hw, struct ice_fltr_mgmt_list_entry *m_ent,
act |= (1 << ICE_LG_ACT_GENERIC_VALUE_S) & ICE_LG_ACT_GENERIC_VALUE_M;
lg_act->pdata.lg_act.act[1] = cpu_to_le32(act);
- act = (7 << ICE_LG_ACT_GENERIC_OFFSET_S) & ICE_LG_ACT_GENERIC_VALUE_M;
+ act = (ICE_LG_ACT_GENERIC_OFF_RX_DESC_PROF_IDX <<
+ ICE_LG_ACT_GENERIC_OFFSET_S) & ICE_LG_ACT_GENERIC_OFFSET_M;
/* Third action Marker value */
act |= ICE_LG_ACT_GENERIC;
act |= (sw_marker << ICE_LG_ACT_GENERIC_VALUE_S) &
ICE_LG_ACT_GENERIC_VALUE_M;
- act |= (0 << ICE_LG_ACT_GENERIC_OFFSET_S) & ICE_LG_ACT_GENERIC_VALUE_M;
lg_act->pdata.lg_act.act[2] = cpu_to_le32(act);
/* call the fill switch rule to fill the lookup tx rx structure */
--
2.17.1
next prev parent reply other threads:[~2018-09-20 2:52 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-20 2:47 [PATCH AUTOSEL 4.18 01/56] ARM: OMAP2+: Fix null hwmod for ti-sysc debug Sasha Levin
2018-09-20 2:47 ` [PATCH AUTOSEL 4.18 02/56] ARM: OMAP2+: Fix module address for modules using mpu_rt_idx Sasha Levin
2018-09-20 2:47 ` [PATCH AUTOSEL 4.18 03/56] bus: ti-sysc: Fix module register ioremap for larger offsets Sasha Levin
2018-09-20 2:47 ` [PATCH AUTOSEL 4.18 04/56] qed: Wait for ready indication before rereading the shmem Sasha Levin
2018-09-20 2:47 ` [PATCH AUTOSEL 4.18 05/56] qed: Wait for MCP halt and resume commands to take place Sasha Levin
2018-09-20 2:47 ` [PATCH AUTOSEL 4.18 07/56] qed: Avoid sending mailbox commands when MFW is not responsive Sasha Levin
2018-09-20 2:47 ` [PATCH AUTOSEL 4.18 06/56] qed: Prevent a possible deadlock during driver load and unload Sasha Levin
2018-09-20 2:47 ` [PATCH AUTOSEL 4.18 08/56] thermal: of-thermal: disable passive polling when thermal zone is disabled Sasha Levin
2018-09-20 2:47 ` [PATCH AUTOSEL 4.18 09/56] isofs: reject hardware sector size > 2048 bytes Sasha Levin
2018-09-20 2:47 ` [PATCH AUTOSEL 4.18 10/56] mmc: atmel-mci: fix bad logic of sg_copy_{from,to}_buffer conversion Sasha Levin
2018-09-20 2:47 ` [PATCH AUTOSEL 4.18 11/56] mmc: android-goldfish: " Sasha Levin
2018-09-20 2:47 ` [PATCH AUTOSEL 4.18 12/56] bus: ti-sysc: Fix no_console_suspend handling Sasha Levin
2018-09-20 2:47 ` [PATCH AUTOSEL 4.18 13/56] ARM: dts: omap4-droid4: fix vibrations on Droid 4 Sasha Levin
2018-09-20 2:47 ` [PATCH AUTOSEL 4.18 15/56] bpf, sockmap: fix sock hash count in alloc_sock_hash_elem Sasha Levin
2018-09-20 2:47 ` [PATCH AUTOSEL 4.18 14/56] bpf, sockmap: fix sock_hash_alloc and reject zero-sized keys Sasha Levin
2018-09-20 2:47 ` [PATCH AUTOSEL 4.18 16/56] tls: possible hang when do_tcp_sendpages hits sndbuf is full case Sasha Levin
2018-09-20 2:47 ` [PATCH AUTOSEL 4.18 17/56] bpf: sockmap: write_space events need to be passed to TCP handler Sasha Levin
2018-09-20 2:47 ` [PATCH AUTOSEL 4.18 19/56] drm/amdgpu: fix preamble handling Sasha Levin
2018-09-20 2:47 ` [PATCH AUTOSEL 4.18 18/56] drm/amdgpu: fix VM clearing for the root PD Sasha Levin
2018-09-20 2:47 ` [PATCH AUTOSEL 4.18 21/56] net/ncsi: Fixup .dumpit message flags and ID check in Netlink handler Sasha Levin
2018-09-20 2:47 ` [PATCH AUTOSEL 4.18 20/56] amdgpu: fix multi-process hang issue Sasha Levin
2018-09-20 2:47 ` [PATCH AUTOSEL 4.18 22/56] tcp_bbr: add bbr_check_probe_rtt_done() helper Sasha Levin
2018-09-20 2:47 ` [PATCH AUTOSEL 4.18 23/56] tcp_bbr: in restart from idle, see if we should exit PROBE_RTT Sasha Levin
2018-09-20 2:47 ` [PATCH AUTOSEL 4.18 24/56] net: hns: fix length and page_offset overflow when CONFIG_ARM64_64K_PAGES Sasha Levin
2018-09-20 2:47 ` [PATCH AUTOSEL 4.18 25/56] net: hns: fix skb->truesize underestimation Sasha Levin
2018-09-20 2:47 ` [PATCH AUTOSEL 4.18 26/56] net: hns3: fix page_offset overflow when CONFIG_ARM64_64K_PAGES Sasha Levin
2018-09-20 2:47 ` Sasha Levin [this message]
2018-09-20 2:47 ` [PATCH AUTOSEL 4.18 28/56] ice: Report stats for allocated queues via ethtool stats Sasha Levin
2018-09-20 2:47 ` [PATCH AUTOSEL 4.18 29/56] ice: Clean control queues only when they are initialized Sasha Levin
2018-09-20 2:47 ` [PATCH AUTOSEL 4.18 30/56] ice: Fix bugs in control queue processing Sasha Levin
2018-09-20 2:47 ` [PATCH AUTOSEL 4.18 31/56] ice: Use order_base_2 to calculate higher power of 2 Sasha Levin
2018-09-20 2:47 ` [PATCH AUTOSEL 4.18 33/56] tools: bpftool: return from do_event_pipe() on bad arguments Sasha Levin
2018-09-20 2:47 ` [PATCH AUTOSEL 4.18 32/56] ice: Set VLAN flags correctly Sasha Levin
2018-09-20 2:47 ` [PATCH AUTOSEL 4.18 34/56] ice: Fix a few null pointer dereference issues Sasha Levin
2018-09-20 2:47 ` [PATCH AUTOSEL 4.18 35/56] ice: Fix potential return of uninitialized value Sasha Levin
2018-09-20 2:47 ` [PATCH AUTOSEL 4.18 36/56] e1000: check on netif_running() before calling e1000_up() Sasha Levin
2018-09-20 2:47 ` [PATCH AUTOSEL 4.18 38/56] ixgbe: fix driver behaviour after issuing VFLR Sasha Levin
2018-09-20 2:47 ` [PATCH AUTOSEL 4.18 37/56] e1000: ensure to free old tx/rx rings in set_ringparam() Sasha Levin
2018-09-20 2:47 ` [PATCH AUTOSEL 4.18 39/56] i40e: Fix for Tx timeouts when interface is brought up if DCB is enabled Sasha Levin
2018-09-20 2:47 ` [PATCH AUTOSEL 4.18 40/56] i40e: fix condition of WARN_ONCE for stat strings Sasha Levin
2018-09-20 2:47 ` [PATCH AUTOSEL 4.18 41/56] crypto: chtls - fix null dereference chtls_free_uld() Sasha Levin
2018-09-20 2:47 ` [PATCH AUTOSEL 4.18 42/56] crypto: cavium/nitrox - fix for command corruption in queue full case with backlog submissions Sasha Levin
2018-09-20 2:47 ` [PATCH AUTOSEL 4.18 43/56] hwmon: (ina2xx) fix sysfs shunt resistor read access Sasha Levin
2018-09-20 2:47 ` [PATCH AUTOSEL 4.18 44/56] hwmon: (adt7475) Make adt7475_read_word() return errors Sasha Levin
2018-09-20 2:47 ` [PATCH AUTOSEL 4.18 45/56] Revert "ARM: dts: imx7d: Invert legacy PCI irq mapping" Sasha Levin
2018-09-20 2:48 ` [PATCH AUTOSEL 4.18 47/56] drm/amdgpu: Update power state at the end of smu hw_init Sasha Levin
2018-09-20 2:48 ` [PATCH AUTOSEL 4.18 46/56] drm/amdgpu: Enable/disable gfx PG feature in rlc safe mode Sasha Levin
2018-09-20 2:48 ` [PATCH AUTOSEL 4.18 48/56] ata: ftide010: Add a quirk for SQ201 Sasha Levin
2018-09-20 2:48 ` [PATCH AUTOSEL 4.18 49/56] nvme-fcloop: Fix dropped LS's to removed target port Sasha Levin
2018-09-20 2:48 ` [PATCH AUTOSEL 4.18 51/56] drm/amdgpu: Need to set moved to true when evict bo Sasha Levin
2018-09-20 2:48 ` [PATCH AUTOSEL 4.18 50/56] ARM: dts: omap4-droid4: Fix emmc errors seen on some devices Sasha Levin
2018-09-20 2:48 ` [PATCH AUTOSEL 4.18 52/56] arm/arm64: smccc-1.1: Make return values unsigned long Sasha Levin
2018-09-20 2:48 ` [PATCH AUTOSEL 4.18 53/56] arm/arm64: smccc-1.1: Handle function result as parameters Sasha Levin
2018-09-20 2:48 ` [PATCH AUTOSEL 4.18 54/56] i2c: i801: Allow ACPI AML access I/O ports not reserved for SMBus Sasha Levin
2018-09-20 2:48 ` [PATCH AUTOSEL 4.18 56/56] x86/pti: Fix section mismatch warning/error Sasha Levin
2018-09-20 2:48 ` [PATCH AUTOSEL 4.18 55/56] clk: x86: Set default parent to 48Mhz Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180920024716.58490-27-alexander.levin@microsoft.com \
--to=alexander.levin@microsoft.com \
--cc=anirudh.venkataramanan@intel.com \
--cc=jeffrey.t.kirsher@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome