From: Chuanhua Han <chuanhua.han@nxp.com>
To: broonie@kernel.org
Cc: linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org,
eha@deif.com, boris.brezillon@bootlin.com,
Chuanhua Han <chuanhua.han@nxp.com>
Subject: [PATCH 2/2] spi: spi-fsl-dspi: Fix support for XSPI transport mode
Date: Fri, 21 Sep 2018 15:06:27 +0800 [thread overview]
Message-ID: <20180921070628.35153-2-chuanhua.han@nxp.com> (raw)
In-Reply-To: <20180921070628.35153-1-chuanhua.han@nxp.com>
This patch fixes the problem that the XSPI mode of the dspi controller
cannot transfer data properly.
In XSPI mode, cmd_fifo is written before tx_fifo, which transforms the
byte order of sending and receiving data.
Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>
---
drivers/spi/spi-fsl-dspi.c | 29 +++++++++++++++++++----------
1 file changed, 19 insertions(+), 10 deletions(-)
diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index 3082e72e4f6c..44cc2bd0120e 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -220,9 +220,15 @@ static u32 dspi_pop_tx(struct fsl_dspi *dspi)
if (dspi->bytes_per_word == 1)
txdata = *(u8 *)dspi->tx;
else if (dspi->bytes_per_word == 2)
- txdata = *(u16 *)dspi->tx;
+ if (dspi->cur_chip->ctar_val & SPI_CTAR_LSBFE(1))
+ txdata = cpu_to_le16(*(u16 *)dspi->tx);
+ else
+ txdata = cpu_to_be16(*(u16 *)dspi->tx);
else /* dspi->bytes_per_word == 4 */
- txdata = *(u32 *)dspi->tx;
+ if (dspi->cur_chip->ctar_val & SPI_CTAR_LSBFE(1))
+ txdata = cpu_to_le32(*(u32 *)dspi->tx);
+ else
+ txdata = cpu_to_be32(*(u32 *)dspi->tx);
dspi->tx += dspi->bytes_per_word;
}
dspi->len -= dspi->bytes_per_word;
@@ -243,15 +249,18 @@ static void dspi_push_rx(struct fsl_dspi *dspi, u32 rxdata)
if (!dspi->rx)
return;
- /* Mask of undefined bits */
- rxdata &= (1 << dspi->bits_per_word) - 1;
-
if (dspi->bytes_per_word == 1)
*(u8 *)dspi->rx = rxdata;
else if (dspi->bytes_per_word == 2)
- *(u16 *)dspi->rx = rxdata;
+ if (dspi->cur_chip->ctar_val & SPI_CTAR_LSBFE(1))
+ *(u16 *)dspi->rx = be16_to_cpu(rxdata);
+ else
+ *(u16 *)dspi->rx = be16_to_cpu(rxdata);
else /* dspi->bytes_per_word == 4 */
- *(u32 *)dspi->rx = rxdata;
+ if (dspi->cur_chip->ctar_val & SPI_CTAR_LSBFE(1))
+ *(u32 *)dspi->rx = le32_to_cpu(rxdata);
+ else
+ *(u32 *)dspi->rx = be32_to_cpu(rxdata);
dspi->rx += dspi->bytes_per_word;
}
@@ -593,16 +602,16 @@ static void dspi_tcfq_write(struct fsl_dspi *dspi)
*/
u32 data = dspi_pop_tx(dspi);
+ cmd_fifo_write(dspi);
if (dspi->cur_chip->ctar_val & SPI_CTAR_LSBFE(1)) {
/* LSB */
- tx_fifo_write(dspi, data & 0xFFFF);
tx_fifo_write(dspi, data >> 16);
+ tx_fifo_write(dspi, data & 0xFFFF);
} else {
/* MSB */
- tx_fifo_write(dspi, data >> 16);
tx_fifo_write(dspi, data & 0xFFFF);
+ tx_fifo_write(dspi, data >> 16);
}
- cmd_fifo_write(dspi);
} else {
/* Write one entry to both TX FIFO and CMD FIFO
* simultaneously.
--
2.17.1
next prev parent reply other threads:[~2018-09-21 7:06 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-21 7:06 [PATCH 1/2] spi: spi-mem: Add the spi_set_xfer_bpw function Chuanhua Han
2018-09-21 7:06 ` Chuanhua Han [this message]
2018-09-28 6:37 ` [PATCH 2/2] spi: spi-fsl-dspi: Fix support for XSPI transport mode Chuanhua Han
2018-09-28 6:55 ` Boris Brezillon
2018-09-29 14:56 ` Esben Haabendal
2018-09-29 15:43 ` Boris Brezillon
2018-09-30 2:49 ` Chuanhua Han
2018-09-21 7:06 ` [PATCH] spi: spi-mem: Adjust op len based on message/transfer size limitations Chuanhua Han
2018-09-21 7:15 ` Chuanhua Han
2018-09-28 6:37 ` [PATCH 1/2] spi: spi-mem: Add the spi_set_xfer_bpw function Chuanhua Han
2018-09-28 6:44 ` Boris Brezillon
2018-09-28 6:59 ` Chuanhua Han
2018-09-28 7:18 ` Boris Brezillon
2018-09-28 7:29 ` Chuanhua Han
2018-09-28 13:26 ` Mark Brown
2018-10-09 9:52 ` Chuanhua Han
2018-10-09 10:05 ` Boris Brezillon
2018-10-09 10:24 ` Chuanhua Han
2018-10-09 11:20 ` Esben Haabendal
2018-10-10 2:42 ` Chuanhua Han
2018-10-10 6:38 ` Esben Haabendal
2018-10-09 10:33 ` Mark Brown
2018-10-09 13:50 ` Esben Haabendal
2018-10-09 10:53 ` Esben Haabendal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180921070628.35153-2-chuanhua.han@nxp.com \
--to=chuanhua.han@nxp.com \
--cc=boris.brezillon@bootlin.com \
--cc=broonie@kernel.org \
--cc=eha@deif.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®