mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
To: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Russell King - ARM Linux <linux@armlinux.org.uk>,
	Jan Kundr??t <jan.kundrat@cesnet.cz>,
	Baruch Siach <baruch@tkos.co.il>,
	Jason Cooper <jason@lakedaemon.net>,
	linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	Bjorn Helgaas <bhelgaas@google.com>,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [BISECTED] Regression: Solidrun Clearfog Base won't boot since "PCI: mvebu: Only remap I/O space if configured"
Date: Mon, 24 Sep 2018 15:15:12 +0100	[thread overview]
Message-ID: <20180924141512.GA11875@e107981-ln.cambridge.arm.com> (raw)
In-Reply-To: <20180924151040.5e57462b@windsurf>

On Mon, Sep 24, 2018 at 03:10:40PM +0200, Thomas Petazzoni wrote:
> Hello,
> 
> On Mon, 24 Sep 2018 13:46:29 +0100, Lorenzo Pieralisi wrote:
> 
> > What I think you can do short term, given that AFAICS MVEBU is not
> > removable, instead of using pci_host_probe() you move part of its code
> > into the driver and make sure that you remap IO as last operation before
> > probe completion (ie after scanning the host bridge) so that you do not
> > need to unmap it on failure; write a commit log summarising/linking this
> > thread please and when v4.20 lands we will give this a more thorough
> > look as Russell requested.
> > 
> > How does that sound ?
> 
> The only thing that can fail in pci_host_probe() is:
> 
> 	ret = pci_scan_root_bus_bridge(bridge);
> 	if (ret < 0) {
> 		dev_err(bridge->dev.parent, "Scanning root bridge
> 	failed"); return ret;
> 	}
> 
> In the pci-mvebu driver prior to the conversion to pci_host_probe(),
> the code flow at the end of ->probe() was:
> 
>   mvebu_pcie_enable()
>     pci_common_init_dev()
>       pcibios_init_hw()
> 
> and pcibios_init_hw() calls pci_scan_root_bus_bridge(), without doing
> much about the return value other than issuing a warning:
> 
>                                 ret = pci_scan_root_bus_bridge(bridge);
>                         }
> 
>                         if (WARN(ret < 0, "PCI: unable to scan bus!")) {
>                                 pci_free_host_bridge(bridge);
>                                 break;
>                         }
> 
> I.e, even before the conversion to pci_host_probe(), in case of
> failure in pci_scan_root_bus_bridge(), we would have the I/O mapping in
> place, but the PCI controller not registered.
> 
> We could keep the same (not great) behavior by doing:
> 
> diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c
> index 50eb0729385b..487492f0c5f7 100644
> --- a/drivers/pci/controller/pci-mvebu.c
> +++ b/drivers/pci/controller/pci-mvebu.c
> @@ -1179,9 +1179,6 @@ static int mvebu_pcie_parse_request_resources(struct mvebu_pcie *pcie)
>                                          resource_size(&pcie->io) - 1);
>                 pcie->realio.name = "PCI I/O";
>  
> -               for (i = 0; i < resource_size(&pcie->realio); i += SZ_64K)
> -                       pci_ioremap_io(i, pcie->io.start + i);
> -
>                 pci_add_resource(&pcie->resources, &pcie->realio);
>         }
>  
> @@ -1197,7 +1194,7 @@ static int mvebu_pcie_probe(struct platform_device *pdev)
>         struct device_node *child;
>         int num, i, ret;
>  
> -       bridge = devm_pci_alloc_host_bridge(dev, sizeof(struct mvebu_pcie));
> +       bridge = pci_alloc_host_bridge(sizeof(struct mvebu_pcie));
>         if (!bridge)
>                 return -ENOMEM;
>  
> @@ -1212,8 +1209,10 @@ static int mvebu_pcie_probe(struct platform_device *pdev)
>         num = of_get_available_child_count(np);
>  
>         pcie->ports = devm_kcalloc(dev, num, sizeof(*pcie->ports), GFP_KERNEL);
> -       if (!pcie->ports)
> -               return -ENOMEM;
> +       if (!pcie->ports) {
> +               ret = -ENOMEM;
> +               goto free_host_bridge;
> +       }
>  
>         i = 0;
>         for_each_available_child_of_node(np, child) {
> @@ -1222,7 +1221,7 @@ static int mvebu_pcie_probe(struct platform_device *pdev)
>                 ret = mvebu_pcie_parse_port(pcie, port, child);
>                 if (ret < 0) {
>                         of_node_put(child);
> -                       return ret;
> +                       goto free_host_bridge;
>                 } else if (ret == 0) {
>                         continue;
>                 }
> @@ -1268,7 +1267,21 @@ static int mvebu_pcie_probe(struct platform_device *pdev)
>         bridge->align_resource = mvebu_pcie_align_resource;
>         bridge->msi = pcie->msi;
>  
> -       return pci_host_probe(bridge);
> +       if (resource_size(&pcie->io) != 0) {
> +               for (i = 0; i < resource_size(&pcie->realio); i += SZ_64K)
> +                       pci_ioremap_io(i, pcie->io.start + i);
> +       }
> +
> +       ret = pci_host_probe(bridge);
> +       if (ret)
> +               pci_free_host_bridge(bridge);
> +
> +       /* Yes, when pci_host_probe() returns a failure, we don't care */
> +       return 0;
> +
> +free_host_bridge:
> +       pci_free_host_bridge(bridge);
> +       return ret;
>  }
>  
>  static const struct of_device_id mvebu_pcie_of_match_table[] = {
> 
> I.e, we simply ignore the failure of pci_host_probe().
> 
> To be honest, I really prefer the option of introducing pci_unmap_io().

I understand that, I wanted to make sure we come up with a fix asap
and what I put forward would cover everything discussed in this thread,
at least temporarily, giving us time to check ISA related issues while
unmapping IO space.

Lorenzo

  reply	other threads:[~2018-09-24 14:15 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-12 16:11 Jan Kundrát
2018-09-12 18:49 ` Baruch Siach
2018-09-12 18:50   ` Thomas Petazzoni
2018-09-12 19:00     ` Jan Kundrát
2018-09-12 23:10   ` Russell King - ARM Linux
2018-09-13  3:19     ` Baruch Siach
2018-09-13  7:45     ` Thomas Petazzoni
2018-09-13  8:20       ` Jan Kundrát
2018-09-13  8:42         ` Thomas Petazzoni
2018-09-24 10:02           ` Jan Kundrát
2018-09-24 10:10             ` Thomas Petazzoni
2018-09-24 10:12           ` Russell King - ARM Linux
2018-09-24 10:26             ` Thomas Petazzoni
2018-09-24 11:13               ` Russell King - ARM Linux
2018-09-24 12:12                 ` Thomas Petazzoni
2018-09-24 12:46                   ` Lorenzo Pieralisi
2018-09-24 13:10                     ` Thomas Petazzoni
2018-09-24 14:15                       ` Lorenzo Pieralisi [this message]
2018-09-24 14:52                         ` Thomas Petazzoni
2018-09-24 16:42                           ` Lorenzo Pieralisi
2018-10-01 10:56                           ` Jan Kundrát
2018-10-01 12:51                             ` Thomas Petazzoni
2018-10-01 21:01                               ` Bjorn Helgaas
2018-09-25  8:18                   ` Andrew Murray

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180924141512.GA11875@e107981-ln.cambridge.arm.com \
    --to=lorenzo.pieralisi@arm.com \
    --cc=baruch@tkos.co.il \
    --cc=bhelgaas@google.com \
    --cc=jan.kundrat@cesnet.cz \
    --cc=jason@lakedaemon.net \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=thomas.petazzoni@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®