mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Suzuki K Poulose <suzuki.poulose@arm.com>
To: linux-arm-kernel@lists.infradead.org
Cc: kvmarm@lists.cs.columbia.edu, kvm@vger.kernel.org,
	marc.zyngier@arm.com, cdall@kernel.org, eric.auger@redhat.com,
	suzuki.poulose@arm.com, will.deacon@arm.com, dave.martin@arm.com,
	peter.maydell@linaro.org, pbonzini@redhat.com,
	rkrcmar@redhat.com, julien.grall@arm.com,
	linux-kernel@vger.kernel.org
Subject: [PATCH v6 18/18] kvm: arm64: Allow tuning the physical address size for VM
Date: Wed, 26 Sep 2018 17:32:54 +0100	[thread overview]
Message-ID: <20180926163258.20218-19-suzuki.poulose@arm.com> (raw)
In-Reply-To: <20180926163258.20218-1-suzuki.poulose@arm.com>

Allow specifying the physical address size limit for a new
VM via the kvm_type argument for the KVM_CREATE_VM ioctl. This
allows us to finalise the stage2 page table as early as possible
and hence perform the right checks on the memory slots
without complication. The size is encoded as Log2(PA_Size) in
bits[7:0] of the type field. For backward compatibility the
value 0 is reserved and implies 40bits. Also, lift the limit
of the IPA to host limit and allow lower IPA sizes (e.g, 32).

The userspace could check the extension KVM_CAP_ARM_VM_IPA_SIZE
for the availability of this feature. The cap check returns the
maximum limit for the physical address shift supported by the host.

Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Christoffer Dall <cdall@kernel.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
---
Changes since v5:
 - Rename the capability to KVM_CAP_ARM_VM_IPA_SIZE
 - Update Documentation of the API (Peter Maydell)
 - Fix comment/commit-description as spotted by Eric
Changes since v4:
 - Fold the introduction of the KVM_CAP_ARM_VM_PHYS_SHIFT to this
   patch to allow detection of the availability of the feature for
   userspace.
 - Document the API
 - Restrict the feature only to arm64.
Changes since V3:
 - Switch to a CAP, that can be checkd via EXTENSIONS on KVM device
   fd, rather than a dedicated ioctl.
---
 Documentation/virtual/kvm/api.txt       | 31 +++++++++++++++++++++++++
 arch/arm64/include/asm/stage2_pgtable.h | 20 ----------------
 arch/arm64/kvm/reset.c                  | 17 ++++++++++----
 include/uapi/linux/kvm.h                | 10 ++++++++
 4 files changed, 54 insertions(+), 24 deletions(-)

diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
index c664064f76fb..54eb7c763c89 100644
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@@ -123,6 +123,37 @@ memory layout to fit in user mode), check KVM_CAP_MIPS_VZ and use the
 flag KVM_VM_MIPS_VZ.
 
 
+On arm64, the physical address size for a VM (IPA Size limit) is limited
+to 40bits by default. The limit can be configured if the host supports the
+extension KVM_CAP_ARM_VM_IPA_SIZE. When supported, use
+KVM_VM_TYPE_ARM_IPA_SIZE(IPA_Bits) to set the size in the machine type
+identifier, where IPA_Bits is the maximum width of any physical
+address used by the VM. The IPA_Bits is encoded in bits[7-0] of the
+machine type identifier.
+
+e.g, to configure a guest to use 48bit physical address size :
+
+    vm_fd = ioctl(dev_fd, KVM_CREATE_VM, KVM_VM_TYPE_ARM_IPA_SIZE(48));
+
+The requested size (IPA_Bits) must be :
+  0 - Implies default size, 40bits (for backward compatibility)
+
+  or
+
+  N - Implies N bits, where N is a positive integer such that,
+      32 <= N <= Host_IPA_Limit
+
+Host_IPA_Limit is the maximum possible value for IPA_Bits on the host and
+is dependent on the CPU capability and the kernel configuration. The limit can
+be retrieved using KVM_CAP_ARM_VM_IPA_SIZE of the KVM_CHECK_EXTENSION
+ioctl() at run-time.
+
+Please note that configuring the IPA size does not affect the capability
+exposed by the guest CPUs in ID_AA64MMFR0_EL1[PARange]. It only affects
+size of the address translated by the stage2 level (guest physical to
+host physical address translations).
+
+
 4.3 KVM_GET_MSR_INDEX_LIST, KVM_GET_MSR_FEATURE_INDEX_LIST
 
 Capability: basic, KVM_CAP_GET_MSR_FEATURES for KVM_GET_MSR_FEATURE_INDEX_LIST
diff --git a/arch/arm64/include/asm/stage2_pgtable.h b/arch/arm64/include/asm/stage2_pgtable.h
index 2cce769ba4c6..d352f6df8d2c 100644
--- a/arch/arm64/include/asm/stage2_pgtable.h
+++ b/arch/arm64/include/asm/stage2_pgtable.h
@@ -42,28 +42,8 @@
  * the range (IPA_SHIFT, IPA_SHIFT - 4).
  */
 #define stage2_pgtable_levels(ipa)	ARM64_HW_PGTABLE_LEVELS((ipa) - 4)
-#define STAGE2_PGTABLE_LEVELS		stage2_pgtable_levels(KVM_PHYS_SHIFT)
 #define kvm_stage2_levels(kvm)		VTCR_EL2_LVLS(kvm->arch.vtcr)
 
-/*
- * With all the supported VA_BITs and 40bit guest IPA, the following condition
- * is always true:
- *
- *       STAGE2_PGTABLE_LEVELS <= CONFIG_PGTABLE_LEVELS
- *
- * We base our stage-2 page table walker helpers on this assumption and
- * fall back to using the host version of the helper wherever possible.
- * i.e, if a particular level is not folded (e.g, PUD) at stage2, we fall back
- * to using the host version, since it is guaranteed it is not folded at host.
- *
- * If the condition breaks in the future, we can rearrange the host level
- * definitions and reuse them for stage2. Till then...
- */
-#if STAGE2_PGTABLE_LEVELS > CONFIG_PGTABLE_LEVELS
-#error "Unsupported combination of guest IPA and host VA_BITS."
-#endif
-
-
 /* stage2_pgdir_shift() is the size mapped by top-level stage2 entry for the VM */
 #define stage2_pgdir_shift(kvm)		pt_levels_pgdir_shift(kvm_stage2_levels(kvm))
 #define stage2_pgdir_size(kvm)		(1ULL << stage2_pgdir_shift(kvm))
diff --git a/arch/arm64/kvm/reset.c b/arch/arm64/kvm/reset.c
index f156e45760bc..95f28d5950e0 100644
--- a/arch/arm64/kvm/reset.c
+++ b/arch/arm64/kvm/reset.c
@@ -89,6 +89,9 @@ int kvm_arch_dev_ioctl_check_extension(struct kvm *kvm, long ext)
 	case KVM_CAP_VCPU_EVENTS:
 		r = 1;
 		break;
+	case KVM_CAP_ARM_VM_IPA_SIZE:
+		r = kvm_ipa_limit;
+		break;
 	default:
 		r = 0;
 	}
@@ -192,17 +195,23 @@ int kvm_arm_config_vm(struct kvm *kvm, unsigned long type)
 	u32 parange, phys_shift;
 	u8 lvls;
 
-	if (type)
+	if (type & ~KVM_VM_TYPE_ARM_IPA_SIZE_MASK)
 		return -EINVAL;
 
+	phys_shift = KVM_VM_TYPE_ARM_IPA_SIZE(type);
+	if (phys_shift) {
+		if (phys_shift > kvm_ipa_limit ||
+		    phys_shift < 32)
+			return -EINVAL;
+	} else {
+		phys_shift = KVM_PHYS_SHIFT;
+	}
+
 	parange = read_sanitised_ftr_reg(SYS_ID_AA64MMFR0_EL1) & 7;
 	if (parange > ID_AA64MMFR0_PARANGE_MAX)
 		parange = ID_AA64MMFR0_PARANGE_MAX;
 	vtcr |= parange << VTCR_EL2_PS_SHIFT;
 
-	phys_shift = id_aa64mmfr0_parange_to_phys_shift(parange);
-	if (phys_shift > KVM_PHYS_SHIFT)
-		phys_shift = KVM_PHYS_SHIFT;
 	vtcr |= VTCR_EL2_T0SZ(phys_shift);
 	/*
 	 * Use a minimum 2 level page table to prevent splitting
diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h
index 07548de5c988..9b949efcfd32 100644
--- a/include/uapi/linux/kvm.h
+++ b/include/uapi/linux/kvm.h
@@ -750,6 +750,15 @@ struct kvm_ppc_resize_hpt {
 
 #define KVM_S390_SIE_PAGE_OFFSET 1
 
+/*
+ * On arm64, machine type can be used to request the physical
+ * address size for the VM. Bits[7-0] are reserved for the guest
+ * PA size shift (i.e, log2(PA_Size)). For backward compatibility,
+ * value 0 implies the default IPA size, 40bits.
+ */
+#define KVM_VM_TYPE_ARM_IPA_SIZE_MASK	0xffULL
+#define KVM_VM_TYPE_ARM_IPA_SIZE(x)		\
+	((x) & KVM_VM_TYPE_ARM_IPA_SIZE_MASK)
 /*
  * ioctls for /dev/kvm fds:
  */
@@ -952,6 +961,7 @@ struct kvm_ppc_resize_hpt {
 #define KVM_CAP_S390_HPAGE_1M 156
 #define KVM_CAP_NESTED_STATE 157
 #define KVM_CAP_ARM_INJECT_SERROR_ESR 158
+#define KVM_CAP_ARM_VM_IPA_SIZE 159 /* returns maximum IPA bits for a VM */
 
 #ifdef KVM_CAP_IRQ_ROUTING
 
-- 
2.19.0


  parent reply	other threads:[~2018-09-26 16:34 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-26 16:32 [PATCH v6 00/18] kvm: arm64: Dynamic IPA and 52bit IPA Suzuki K Poulose
2018-09-26 16:32 ` [PATCH v6 01/18] kvm: arm/arm64: Fix stage2_flush_memslot for 4 level page table Suzuki K Poulose
2018-09-26 16:32 ` [PATCH v6 02/18] kvm: arm/arm64: Remove spurious WARN_ON Suzuki K Poulose
2018-09-26 16:32 ` [PATCH v6 03/18] kvm: arm64: Add helper for loading the stage2 setting for a VM Suzuki K Poulose
2018-09-26 16:32 ` [PATCH v6 04/18] arm64: Add a helper for PARange to physical shift conversion Suzuki K Poulose
2018-10-01 12:05   ` Catalin Marinas
2018-09-26 16:32 ` [PATCH v6 05/18] kvm: arm64: Clean up VTCR_EL2 initialisation Suzuki K Poulose
2018-09-26 16:32 ` [PATCH v6 06/18] kvm: arm/arm64: Allow arch specific configurations for VM Suzuki K Poulose
2018-09-28 17:27   ` Marc Zyngier
2018-09-29  8:30     ` Suzuki K Poulose
2018-09-26 16:32 ` [PATCH v6 07/18] kvm: arm64: Configure VTCR_EL2 per VM Suzuki K Poulose
2018-10-02  7:48   ` Auger Eric
2018-09-26 16:32 ` [PATCH v6 08/18] kvm: arm/arm64: Prepare for VM specific stage2 translations Suzuki K Poulose
2018-09-26 16:32 ` [PATCH v6 09/18] kvm: arm64: Prepare for dynamic stage2 page table layout Suzuki K Poulose
2018-09-26 16:32 ` [PATCH v6 10/18] kvm: arm64: Make stage2 page table layout dynamic Suzuki K Poulose
2018-09-26 16:32 ` [PATCH v6 11/18] kvm: arm64: Dynamic configuration of VTTBR mask Suzuki K Poulose
2018-10-02  7:54   ` Auger Eric
2018-09-26 16:32 ` [PATCH v6 12/18] kvm: arm64: Configure VTCR_EL2.SL0 per VM Suzuki K Poulose
2018-09-26 16:32 ` [PATCH v6 13/18] kvm: arm64: Switch to per VM IPA limit Suzuki K Poulose
2018-10-02  7:58   ` Auger Eric
2018-09-26 16:32 ` [PATCH v6 14/18] vgic: Add support for 52bit guest physical address Suzuki K Poulose
2018-09-26 16:32 ` [PATCH v6 15/18] kvm: arm64: Add 52bit support for PAR to HPFAR conversoin Suzuki K Poulose
2018-09-26 16:32 ` [PATCH v6 16/18] kvm: arm64: Set a limit on the IPA size Suzuki K Poulose
2018-10-02  8:20   ` Auger Eric
2018-09-26 16:32 ` [PATCH v6 17/18] kvm: arm64: Limit the minimum number of page table levels Suzuki K Poulose
2018-10-02  8:22   ` Auger Eric
2018-09-26 16:32 ` Suzuki K Poulose [this message]
2018-10-02  8:37   ` [PATCH v6 18/18] kvm: arm64: Allow tuning the physical address size for VM Auger Eric
2018-10-31 14:22   ` Christoffer Dall
2018-10-31 17:55     ` Suzuki K Poulose
2018-11-01  8:36       ` Christoffer Dall
2018-11-01  9:32         ` Suzuki K Poulose
2018-09-26 16:32 ` [kvmtool PATCH v6 19/18] kvmtool: Allow backends to run checks on the KVM device fd Suzuki K Poulose
2018-09-26 16:32 ` [kvmtool PATCH v6 20/18] kvmtool: arm64: Add support for guest physical address size Suzuki K Poulose
2018-09-26 16:32 ` [kvmtool PATCH v6 21/18] kvmtool: arm64: Switch memory layout Suzuki K Poulose
2018-09-26 16:32 ` [kvmtool PATCH v6 22/18] kvmtool: arm: Add support for creating VM with PA size Suzuki K Poulose
2018-10-01 14:13   ` Marc Zyngier
2018-10-04  8:40 ` [PATCH v6 00/18] kvm: arm64: Dynamic IPA and 52bit IPA Auger Eric

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180926163258.20218-19-suzuki.poulose@arm.com \
    --to=suzuki.poulose@arm.com \
    --cc=cdall@kernel.org \
    --cc=dave.martin@arm.com \
    --cc=eric.auger@redhat.com \
    --cc=julien.grall@arm.com \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marc.zyngier@arm.com \
    --cc=pbonzini@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=rkrcmar@redhat.com \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®