mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Matias Bjørling" <mb@lightnvm.io>
To: axboe@fb.com
Cc: linux-block@vger.kernel.org, linux-kernel@vger.kernel.org,
	"Hans Holmberg" <hans.holmberg@cnexlabs.com>,
	"Matias Bjørling" <mb@lightnvm.io>
Subject: [GIT PULL 25/45] lightnvm: pblk: add tracing for chunk resets
Date: Tue,  9 Oct 2018 13:11:55 +0200	[thread overview]
Message-ID: <20181009111215.7653-26-mb@lightnvm.io> (raw)
In-Reply-To: <20181009111215.7653-1-mb@lightnvm.io>

From: Hans Holmberg <hans.holmberg@cnexlabs.com>

Trace state of chunk resets.

Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
---
 drivers/lightnvm/pblk-core.c  | 12 ++++++++++++
 drivers/lightnvm/pblk-trace.h | 31 +++++++++++++++++++++++++++++++
 drivers/lightnvm/pblk.h       |  6 ++++++
 3 files changed, 49 insertions(+)

diff --git a/drivers/lightnvm/pblk-core.c b/drivers/lightnvm/pblk-core.c
index c482ef7dd4b5..84f3b4912b92 100644
--- a/drivers/lightnvm/pblk-core.c
+++ b/drivers/lightnvm/pblk-core.c
@@ -90,9 +90,15 @@ static void __pblk_end_io_erase(struct pblk *pblk, struct nvm_rq *rqd)
 	atomic_dec(&line->left_seblks);
 
 	if (rqd->error) {
+		trace_pblk_chunk_reset(pblk_disk_name(pblk),
+				&rqd->ppa_addr, PBLK_CHUNK_RESET_FAILED);
+
 		chunk->state = NVM_CHK_ST_OFFLINE;
 		pblk_mark_bb(pblk, line, rqd->ppa_addr);
 	} else {
+		trace_pblk_chunk_reset(pblk_disk_name(pblk),
+				&rqd->ppa_addr, PBLK_CHUNK_RESET_DONE);
+
 		chunk->state = NVM_CHK_ST_FREE;
 	}
 
@@ -923,6 +929,9 @@ static int pblk_blk_erase_sync(struct pblk *pblk, struct ppa_addr ppa)
 	struct nvm_rq rqd = {NULL};
 	int ret;
 
+	trace_pblk_chunk_reset(pblk_disk_name(pblk), &ppa,
+				PBLK_CHUNK_RESET_START);
+
 	pblk_setup_e_rq(pblk, &rqd, ppa);
 
 	/* The write thread schedules erases so that it minimizes disturbances
@@ -1736,6 +1745,9 @@ int pblk_blk_erase_async(struct pblk *pblk, struct ppa_addr ppa)
 	rqd->end_io = pblk_end_io_erase;
 	rqd->private = pblk;
 
+	trace_pblk_chunk_reset(pblk_disk_name(pblk),
+				&ppa, PBLK_CHUNK_RESET_START);
+
 	/* The write thread schedules erases so that it minimizes disturbances
 	 * with writes. Thus, there is no need to take the LUN semaphore.
 	 */
diff --git a/drivers/lightnvm/pblk-trace.h b/drivers/lightnvm/pblk-trace.h
index c171d0450c07..679e5c458ca6 100644
--- a/drivers/lightnvm/pblk-trace.h
+++ b/drivers/lightnvm/pblk-trace.h
@@ -31,6 +31,37 @@ struct ppa_addr;
 	{ PBLK_STATE_RECOVERING,	"RECOVERING",	},	\
 	{ PBLK_STATE_STOPPED,		"STOPPED"	})
 
+#define show_chunk_erase_state(state) __print_symbolic(state,	\
+	{ PBLK_CHUNK_RESET_START,	"START",	},	\
+	{ PBLK_CHUNK_RESET_DONE,	"OK",		},	\
+	{ PBLK_CHUNK_RESET_FAILED,	"FAILED"	})
+
+
+TRACE_EVENT(pblk_chunk_reset,
+
+	TP_PROTO(const char *name, struct ppa_addr *ppa, int state),
+
+	TP_ARGS(name, ppa, state),
+
+	TP_STRUCT__entry(
+		__string(name, name)
+		__field(u64, ppa)
+		__field(int, state);
+	),
+
+	TP_fast_assign(
+		__assign_str(name, name);
+		__entry->ppa = ppa->ppa;
+		__entry->state = state;
+	),
+
+	TP_printk("dev=%s grp=%llu pu=%llu chk=%llu state=%s", __get_str(name),
+			(u64)(((struct ppa_addr *)(&__entry->ppa))->m.grp),
+			(u64)(((struct ppa_addr *)(&__entry->ppa))->m.pu),
+			(u64)(((struct ppa_addr *)(&__entry->ppa))->m.chk),
+			show_chunk_erase_state((int)__entry->state))
+
+);
 
 TRACE_EVENT(pblk_chunk_state,
 
diff --git a/drivers/lightnvm/pblk.h b/drivers/lightnvm/pblk.h
index b2746099ca1d..7f4e46dfb0d7 100644
--- a/drivers/lightnvm/pblk.h
+++ b/drivers/lightnvm/pblk.h
@@ -79,6 +79,12 @@ enum {
 	PBLK_BLK_ST_CLOSED =	0x2,
 };
 
+enum {
+	PBLK_CHUNK_RESET_START,
+	PBLK_CHUNK_RESET_DONE,
+	PBLK_CHUNK_RESET_FAILED,
+};
+
 struct pblk_sec_meta {
 	u64 reserved;
 	__le64 lba;
-- 
2.17.1


  parent reply	other threads:[~2018-10-09 11:14 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-09 11:11 [GIT PULL 00/45] lightnvm updates for 4.20 Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 01/45] lightnvm: remove dependencies on BLK_DEV_NVME and PCI Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 02/45] lightnvm: combine 1.2 and 2.0 command flags Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 03/45] lightnvm: pblk: fix rqd.error return value in pblk_blk_erase_sync Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 04/45] lightnvm: move device L2P detection to core Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 05/45] lightnvm: pblk: fix race condition on metadata I/O Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 06/45] lightnvm: move bad block and chunk state logic to core Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 07/45] lightnvm: pblk: unify vector max req constants Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 08/45] lightnvm: pblk: fix incorrect min_write_pgs Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 09/45] lightnvm: pblk: remove size and out of bounds read check Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 10/45] lightnvm: pblk: refactor put line fn on read completion Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 11/45] lightnvm: pblk: add helpers for chunk addresses Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 12/45] lightnvm: pblk: improve line helpers Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 13/45] lightnvm: pblk: fix comment typo Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 14/45] lightnvm: pblk: remove unused variable Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 15/45] lightnvm: pblk: guarantee emeta on line close Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 16/45] lightnvm: introduce nvm_rq_to_ppa_list Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 17/45] lightnvm: pblk: allocate line map bitmaps using a mempool Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 18/45] lightnvm: pblk: remove unused parameters in pblk_up_rq Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 19/45] lightnvm: pblk: fix up prints in pblk_read_check_rand Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 20/45] lightnvm: pblk: fix write amplificiation calculation Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 21/45] lightnvm: pblk: remove debug from pblk_[down/up]_page Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 22/45] lightnvm: pblk: add trace events for chunk states Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 23/45] lightnvm: pblk: add trace events for line state changes Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 24/45] lightnvm: pblk: add trace events for pblk " Matias Bjørling
2018-10-09 11:11 ` Matias Bjørling [this message]
2018-10-09 11:11 ` [GIT PULL 26/45] lightnvm: move ppa transformations to core Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 27/45] lightnvm: pblk: calculate line pad distance in helper Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 28/45] lightnvm: pblk: stop recreating global caches Matias Bjørling
2018-10-09 11:11 ` [GIT PULL 29/45] lightnvm: pblk: fix mapping issue on failed writes Matias Bjørling
2018-10-09 11:12 ` [GIT PULL 30/45] lightnvm: pblk: fix two sleep-in-atomic-context bugs Matias Bjørling
2018-10-09 11:12 ` [GIT PULL 31/45] lightnvm: use internal allocation for chunk log page Matias Bjørling
2018-10-09 11:12 ` [GIT PULL 32/45] lightnvm: pblk: encapsulate rqd dma allocations Matias Bjørling
2018-10-09 11:12 ` [GIT PULL 33/45] lightnvm: pblk: refactor metadata paths Matias Bjørling
2018-10-09 11:12 ` [GIT PULL 34/45] lightnvm: pblk: take write semaphore on metadata Matias Bjørling
2018-10-09 11:12 ` [GIT PULL 35/45] lightnvm: pblk: recover open lines on 2.0 devices Matias Bjørling
2018-10-09 11:12 ` [GIT PULL 36/45] lightnvm: pblk: add SPDX license tag Matias Bjørling
2018-10-09 11:12 ` [GIT PULL 37/45] lightnvm: pblk: fix race on sysfs line state Matias Bjørling
2018-10-09 11:12 ` [GIT PULL 38/45] lightnvm: pblk: remove unused function Matias Bjørling
2018-10-09 11:12 ` [GIT PULL 39/45] lightnvm: pblk: encapsulate rb pointer operations Matias Bjørling
2018-10-09 11:12 ` [GIT PULL 40/45] lightnvm: pblk: move ring buffer alloc/free rb init Matias Bjørling
2018-10-09 11:12 ` [GIT PULL 41/45] lightnvm: pblk: guarantee mw_cunits on read buffer Matias Bjørling
2018-10-09 11:12 ` [GIT PULL 42/45] lightnvm: do no update csecs and sos on 1.2 Matias Bjørling
2018-10-09 11:12 ` [GIT PULL 43/45] lightnvm: pblk: fix error handling of pblk_lines_init() Matias Bjørling
2018-10-09 11:12 ` [GIT PULL 44/45] lightnvm: pblk: consider max hw sectors supported for max_write_pgs Matias Bjørling
2018-10-09 11:12 ` [GIT PULL 45/45] lightnvm: pblk: guarantee that backpointer is respected on writer stall Matias Bjørling
2018-10-09 14:25 ` [GIT PULL 00/45] lightnvm updates for 4.20 Jens Axboe

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181009111215.7653-26-mb@lightnvm.io \
    --to=mb@lightnvm.io \
    --cc=axboe@fb.com \
    --cc=hans.holmberg@cnexlabs.com \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®