Re: [PATCH] hwmon: (pmbus) remove redundant 'default n' from Kconfig

[Guenter Roeck <linux@roeck-us.net>]

On Wed, Oct 10, 2018 at 04:35:57PM +0200, Bartlomiej Zolnierkiewicz wrote:
> 'default n' is the default value for any bool or tristate Kconfig
> setting so there is no need to write it explicitly.
> 
> Also since commit f467c5640c29 ("kconfig: only write '# CONFIG_FOO
> is not set' for visible symbols") the Kconfig behavior is the same
> regardless of 'default n' being present or not:
> 
>     ...
>     One side effect of (and the main motivation for) this change is making
>     the following two definitions behave exactly the same:
>     
>         config FOO
>                 bool
>     
>         config FOO
>                 bool
>                 default n
>     
>     With this change, neither of these will generate a
>     '# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied).
>     That might make it clearer to people that a bare 'default n' is
>     redundant.
>     ...
> 
> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

Applied to hwmon-next.

Thanks,
Guenter

> ---
>  drivers/hwmon/pmbus/Kconfig |   15 ---------------
>  1 file changed, 15 deletions(-)
> 
> Index: b/drivers/hwmon/pmbus/Kconfig
> ===================================================================
> --- a/drivers/hwmon/pmbus/Kconfig	2018-10-09 15:58:39.067122941 +0200
> +++ b/drivers/hwmon/pmbus/Kconfig	2018-10-10 16:31:57.671888538 +0200
> @@ -5,7 +5,6 @@
>  menuconfig PMBUS
>  	tristate "PMBus support"
>  	depends on I2C
> -	default n
>  	help
>  	  Say yes here if you want to enable PMBus support.
>  
> @@ -28,7 +27,6 @@ config SENSORS_PMBUS
>  
>  config SENSORS_ADM1275
>  	tristate "Analog Devices ADM1275 and compatibles"
> -	default n
>  	help
>  	  If you say yes here you get hardware monitoring support for Analog
>  	  Devices ADM1075, ADM1272, ADM1275, ADM1276, ADM1278, ADM1293,
> @@ -49,7 +47,6 @@ config SENSORS_IBM_CFFPS
>  
>  config SENSORS_IR35221
>  	tristate "Infineon IR35221"
> -	default n
>  	help
>  	  If you say yes here you get hardware monitoring support for the
>  	  Infineon IR35221 controller.
> @@ -59,7 +56,6 @@ config SENSORS_IR35221
>  
>  config SENSORS_LM25066
>  	tristate "National Semiconductor LM25066 and compatibles"
> -	default n
>  	help
>  	  If you say yes here you get hardware monitoring support for National
>  	  Semiconductor LM25056, LM25066, LM5064, and LM5066.
> @@ -69,7 +65,6 @@ config SENSORS_LM25066
>  
>  config SENSORS_LTC2978
>  	tristate "Linear Technologies LTC2978 and compatibles"
> -	default n
>  	help
>  	  If you say yes here you get hardware monitoring support for Linear
>  	  Technology LTC2974, LTC2975, LTC2977, LTC2978, LTC2980, LTC3880,
> @@ -88,7 +83,6 @@ config SENSORS_LTC2978_REGULATOR
>  
>  config SENSORS_LTC3815
>  	tristate "Linear Technologies LTC3815"
> -	default n
>  	help
>  	  If you say yes here you get hardware monitoring support for Linear
>  	  Technology LTC3815.
> @@ -98,7 +92,6 @@ config SENSORS_LTC3815
>  
>  config SENSORS_MAX16064
>  	tristate "Maxim MAX16064"
> -	default n
>  	help
>  	  If you say yes here you get hardware monitoring support for Maxim
>  	  MAX16064.
> @@ -108,7 +101,6 @@ config SENSORS_MAX16064
>  
>  config SENSORS_MAX20751
>  	tristate "Maxim MAX20751"
> -	default n
>  	help
>  	  If you say yes here you get hardware monitoring support for Maxim
>  	  MAX20751.
> @@ -118,7 +110,6 @@ config SENSORS_MAX20751
>  
>  config SENSORS_MAX31785
>  	tristate "Maxim MAX31785 and compatibles"
> -	default n
>  	help
>  	  If you say yes here you get hardware monitoring support for Maxim
>  	  MAX31785.
> @@ -128,7 +119,6 @@ config SENSORS_MAX31785
>  
>  config SENSORS_MAX34440
>  	tristate "Maxim MAX34440 and compatibles"
> -	default n
>  	help
>  	  If you say yes here you get hardware monitoring support for Maxim
>  	  MAX34440, MAX34441, MAX34446, MAX34451, MAX34460, and MAX34461.
> @@ -138,7 +128,6 @@ config SENSORS_MAX34440
>  
>  config SENSORS_MAX8688
>  	tristate "Maxim MAX8688"
> -	default n
>  	help
>  	  If you say yes here you get hardware monitoring support for Maxim
>  	  MAX8688.
> @@ -148,7 +137,6 @@ config SENSORS_MAX8688
>  
>  config SENSORS_TPS40422
>  	tristate "TI TPS40422"
> -	default n
>  	help
>  	  If you say yes here you get hardware monitoring support for TI
>  	  TPS40422.
> @@ -167,7 +155,6 @@ config SENSORS_TPS53679
>  
>  config SENSORS_UCD9000
>  	tristate "TI UCD90120, UCD90124, UCD90160, UCD9090, UCD90910"
> -	default n
>  	help
>  	  If you say yes here you get hardware monitoring support for TI
>  	  UCD90120, UCD90124, UCD90160, UCD9090, UCD90910, Sequencer and System
> @@ -178,7 +165,6 @@ config SENSORS_UCD9000
>  
>  config SENSORS_UCD9200
>  	tristate "TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, UCD9248"
> -	default n
>  	help
>  	  If you say yes here you get hardware monitoring support for TI
>  	  UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248
> @@ -189,7 +175,6 @@ config SENSORS_UCD9200
>  
>  config SENSORS_ZL6100
>  	tristate "Intersil ZL6100 and compatibles"
> -	default n
>  	help
>  	  If you say yes here you get hardware monitoring support for Intersil
>  	  ZL2004, ZL2005, ZL2006, ZL2008, ZL2105, ZL2106, ZL6100, ZL6105,