From: Richard Leitner <richard.leitner@skidata.com>
To: <dmitry.torokhov@gmail.com>, <robh+dt@kernel.org>,
<mark.rutland@arm.com>
Cc: <linux-input@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
Richard Leitner <richard.leitner@skidata.com>
Subject: [PATCH v2 7/8] Input: sx8654 - use common of_touchscreen functions
Date: Wed, 17 Oct 2018 14:51:15 +0200 [thread overview]
Message-ID: <20181017125116.20077-8-richard.leitner@skidata.com> (raw)
In-Reply-To: <20181017125116.20077-1-richard.leitner@skidata.com>
of_touchscreen.c provides a common interface for a axis invertion and
swapping of touchscreens. Therefore use it in the sx8654 driver.
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
---
drivers/input/touchscreen/sx8654.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/input/touchscreen/sx8654.c b/drivers/input/touchscreen/sx8654.c
index 4939863efbef..b7b263ed52af 100644
--- a/drivers/input/touchscreen/sx8654.c
+++ b/drivers/input/touchscreen/sx8654.c
@@ -35,6 +35,7 @@
#include <linux/irq.h>
#include <linux/gpio/consumer.h>
#include <linux/delay.h>
+#include <linux/input/touchscreen.h>
/* register addresses */
#define I2C_REG_TOUCH0 0x00
@@ -101,6 +102,7 @@ struct sx8654 {
spinlock_t lock; /* for input reporting from irq/timer */
struct timer_list timer;
+ struct touchscreen_properties props;
const struct sx865x_data *data;
};
@@ -178,8 +180,7 @@ static irqreturn_t sx8650_irq(int irq, void *handle)
chdata);
}
- input_report_abs(ts->input, ABS_X, x);
- input_report_abs(ts->input, ABS_Y, y);
+ touchscreen_report_pos(ts->input, &ts->props, x, y, false);
input_report_key(ts->input, BTN_TOUCH, 1);
input_sync(ts->input);
dev_dbg(dev, "point(%4d,%4d)\n", x, y);
@@ -226,8 +227,8 @@ static irqreturn_t sx8654_irq(int irq, void *handle)
x = ((data[0] & 0xf) << 8) | (data[1]);
y = ((data[2] & 0xf) << 8) | (data[3]);
- input_report_abs(sx8654->input, ABS_X, x);
- input_report_abs(sx8654->input, ABS_Y, y);
+ touchscreen_report_pos(sx8654->input, &sx8654->props, x, y,
+ false);
input_report_key(sx8654->input, BTN_TOUCH, 1);
input_sync(sx8654->input);
@@ -377,6 +378,8 @@ static int sx8654_probe(struct i2c_client *client,
input_set_abs_params(input, ABS_X, 0, MAX_12BIT, 0, 0);
input_set_abs_params(input, ABS_Y, 0, MAX_12BIT, 0, 0);
+ touchscreen_parse_properties(input, false, &sx8654->props);
+
sx8654->client = client;
sx8654->input = input;
--
2.11.0
next prev parent reply other threads:[~2018-10-17 16:04 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-17 12:51 [PATCH v2 0/7] Input: sx8654 - reset-gpio, sx865[056] support, etc Richard Leitner
2018-10-17 12:51 ` [PATCH v2 1/8] dt-bindings: input: touchscreen: sx8654: add reset-gpio property Richard Leitner
2018-10-18 20:34 ` Rob Herring
2018-10-17 12:51 ` [PATCH v2 2/8] Input: sx8654 - add reset-gpio support Richard Leitner
2018-10-17 12:51 ` [PATCH v2 3/8] dt-bindings: input: touchscreen: sx8654: add compatible models Richard Leitner
2018-10-18 20:35 ` Rob Herring
2018-10-17 12:51 ` [PATCH v2 4/8] Input: sx8654 - add sx8655 and sx8656 to compatibles Richard Leitner
2018-10-17 12:51 ` [PATCH v2 5/8] dt-bindings: input: touchscreen: sx8654: add sx8650 to comatibles Richard Leitner
2018-10-18 20:35 ` Rob Herring
2018-10-17 12:51 ` [PATCH v2 6/8] Input: sx8654 - add sx8650 support Richard Leitner
2018-10-17 12:51 ` Richard Leitner [this message]
2018-10-17 12:51 ` [PATCH v2 8/8] Input: sx8654 - convert #defined flags to BIT(x) Richard Leitner
2018-11-04 21:38 ` [PATCH v2 0/7] Input: sx8654 - reset-gpio, sx865[056] support, etc Richard Leitner
2018-12-03 8:25 ` Richard Leitner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181017125116.20077-8-richard.leitner@skidata.com \
--to=richard.leitner@skidata.com \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®