From: Salil Mehta <salil.mehta@huawei.com>
To: <davem@davemloft.net>
Cc: <salil.mehta@huawei.com>, <andrew@lunn.ch>, <yuvalm@mellanox.com>,
<leon@kernel.org>, <yisen.zhuang@huawei.com>,
<lipeng321@huawei.com>, <mehta.salil@opnsrc.net>,
<netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-rdma@vger.kernel.org>, <linuxarm@huawei.com>,
liuzhongzhu <liuzhongzhu@huawei.com>
Subject: [RFC PATCH 08/10] net: hns3: Add PFC config info query function
Date: Fri, 9 Nov 2018 22:07:41 +0000 [thread overview]
Message-ID: <20181109220743.10264-9-salil.mehta@huawei.com> (raw)
In-Reply-To: <20181109220743.10264-1-salil.mehta@huawei.com>
From: liuzhongzhu <liuzhongzhu@huawei.com>
This patch prints qos pause config information.
debugfs command:
echo dump qos pause cfg > cmd
Sample Command:
root@(none)# echo dump qos pause cfg > cmd
hns3 0000:7d:00.0: dump qos pause cfg
hns3 0000:7d:00.0: pause_trans_gap: 0xff
hns3 0000:7d:00.0: pause_trans_time: 0xffff
root@(none)#
Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
---
drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c | 1 +
.../ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c | 25 ++++++++++++++++++++++
2 files changed, 26 insertions(+)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c b/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c
index 27757be..8edb4e9 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c
@@ -133,6 +133,7 @@ static void hns3_dbg_help(struct hnae3_handle *h)
dev_info(&h->pdev->dev, "dump tc\n");
dev_info(&h->pdev->dev, "dump tm\n");
dev_info(&h->pdev->dev, "dump checksum\n");
+ dev_info(&h->pdev->dev, "dump qos pause cfg\n");
}
static ssize_t hns3_dbg_cmd_read(struct file *filp, char __user *buffer,
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c
index 4fa546f..a71e9d0 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c
@@ -341,6 +341,29 @@ static void hclge_dbg_dump_checksum(struct hclge_dev *hdev)
"inner_sctp", "enable", "disable");
}
+static void hclge_dbg_dump_qos_pause_cfg(struct hclge_dev *hdev)
+{
+ struct hclge_cfg_pause_param_cmd *pause_param;
+ struct hclge_desc desc;
+ int ret;
+
+ hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_CFG_MAC_PARA, true);
+
+ ret = hclge_cmd_send(&hdev->hw, &desc, 1);
+ if (ret) {
+ dev_err(&hdev->pdev->dev, "dump checksum fail, status is %d.\n",
+ ret);
+ return;
+ }
+
+ pause_param = (struct hclge_cfg_pause_param_cmd *)desc.data;
+ dev_info(&hdev->pdev->dev, "dump qos pause cfg\n");
+ dev_info(&hdev->pdev->dev, "pause_trans_gap: 0x%x\n",
+ pause_param->pause_trans_gap);
+ dev_info(&hdev->pdev->dev, "pause_trans_time: 0x%x\n",
+ pause_param->pause_trans_time);
+}
+
static void hclge_dbg_fd_tcam_read(struct hclge_dev *hdev, u8 stage,
bool sel_x, u32 loc)
{
@@ -410,6 +433,8 @@ int hclge_dbg_run_cmd(struct hnae3_handle *handle, char *cmd_buf)
hclge_dbg_dump_tm(hdev);
} else if (strncmp(cmd_buf, "dump checksum", 13) == 0) {
hclge_dbg_dump_checksum(hdev);
+ } else if (strncmp(cmd_buf, "dump qos pause cfg", 18) == 0) {
+ hclge_dbg_dump_qos_pause_cfg(hdev);
} else {
dev_info(&hdev->pdev->dev, "unknown command\n");
return -EINVAL;
--
2.7.4
next prev parent reply other threads:[~2018-11-09 22:09 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-09 22:07 [RFC PATCH 00/10] net: hns3: Adds support of debugfs to HNS3 driver Salil Mehta
2018-11-09 22:07 ` [RFC PATCH 01/10] net: hns3: Add debugfs framework registration Salil Mehta
2018-11-09 22:07 ` [RFC PATCH 02/10] net: hns3: Add "queue info" query function Salil Mehta
2018-11-09 22:07 ` [RFC PATCH 03/10] net: hns3: Add "FD flow table" info " Salil Mehta
2018-11-09 22:07 ` [RFC PATCH 04/10] net: hns3: Add "promisc mode" config " Salil Mehta
2018-11-09 22:49 ` Andrew Lunn
2018-11-11 16:45 ` Salil Mehta
2018-11-09 22:07 ` [RFC PATCH 05/10] net: hns3: Add "tc config" " Salil Mehta
2018-11-09 22:07 ` [RFC PATCH 06/10] net: hns3: Add "tm " Salil Mehta
2018-11-09 22:07 ` [RFC PATCH 07/10] net: hns3: Add checksum " Salil Mehta
2018-11-09 22:51 ` Andrew Lunn
2018-11-11 16:23 ` Salil Mehta
2018-11-09 22:07 ` Salil Mehta [this message]
2018-11-09 22:07 ` [RFC PATCH 09/10] net: hns3: Add "qos prio map" " Salil Mehta
2018-11-09 22:07 ` [RFC PATCH 10/10] net: hns3: Add "qos buffer" config " Salil Mehta
2018-11-09 22:43 ` [RFC PATCH 00/10] net: hns3: Adds support of debugfs to HNS3 driver Andrew Lunn
2018-11-11 15:12 ` Salil Mehta
2018-11-11 16:18 ` Andrew Lunn
2018-11-11 16:47 ` Salil Mehta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181109220743.10264-9-salil.mehta@huawei.com \
--to=salil.mehta@huawei.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=leon@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=lipeng321@huawei.com \
--cc=liuzhongzhu@huawei.com \
--cc=mehta.salil@opnsrc.net \
--cc=netdev@vger.kernel.org \
--cc=yisen.zhuang@huawei.com \
--cc=yuvalm@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®