mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Eric Anholt <eric@anholt.net>
To: Florian Fainelli <f.fainelli@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Wim Van Sebroeck <wim@linux-watchdog.org>,
	Guenter Roeck <linux@roeck-us.net>,
	linux-watchdog@vger.kernel.org
Cc: linux-rpi-kernel@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Stefan Wahren <stefan.wahren@i2se.com>,
	bcm-kernel-feedback-list@broadcom.com,
	Eric Anholt <eric@anholt.net>
Subject: [PATCH 2/8] soc: bcm: bcm2835-pm: Rename the driver to its new "PM" name.
Date: Tue, 20 Nov 2018 09:19:54 -0800	[thread overview]
Message-ID: <20181120172000.15102-3-eric@anholt.net> (raw)
In-Reply-To: <20181120172000.15102-1-eric@anholt.net>

This is the name of the block we're controlling.

Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/soc/bcm/bcm2835-pm.c | 92 ++++++++++++++++++------------------
 1 file changed, 47 insertions(+), 45 deletions(-)

diff --git a/drivers/soc/bcm/bcm2835-pm.c b/drivers/soc/bcm/bcm2835-pm.c
index ed05514cc2dc..ca37145e4e40 100644
--- a/drivers/soc/bcm/bcm2835-pm.c
+++ b/drivers/soc/bcm/bcm2835-pm.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
- * Watchdog driver for Broadcom BCM2835
+ * PM driver for Broadcom BCM2835
  *
  * "bcm2708_wdog" driver written by Luke Diamand that was obtained from
  * branch "rpi-3.6.y" of git://github.com/raspberrypi/linux.git was used
@@ -42,7 +42,7 @@
 #define SECS_TO_WDOG_TICKS(x) ((x) << 16)
 #define WDOG_TICKS_TO_SECS(x) ((x) >> 16)
 
-struct bcm2835_wdt {
+struct bcm2835_pm {
 	void __iomem		*base;
 	spinlock_t		lock;
 };
@@ -50,60 +50,60 @@ struct bcm2835_wdt {
 static unsigned int heartbeat;
 static bool nowayout = WATCHDOG_NOWAYOUT;
 
-static bool bcm2835_wdt_is_running(struct bcm2835_wdt *wdt)
+static bool bcm2835_wdt_is_running(struct bcm2835_pm *pm)
 {
 	uint32_t cur;
 
-	cur = readl(wdt->base + PM_RSTC);
+	cur = readl(pm->base + PM_RSTC);
 
 	return !!(cur & PM_RSTC_WRCFG_FULL_RESET);
 }
 
 static int bcm2835_wdt_start(struct watchdog_device *wdog)
 {
-	struct bcm2835_wdt *wdt = watchdog_get_drvdata(wdog);
+	struct bcm2835_pm *pm = watchdog_get_drvdata(wdog);
 	uint32_t cur;
 	unsigned long flags;
 
-	spin_lock_irqsave(&wdt->lock, flags);
+	spin_lock_irqsave(&pm->lock, flags);
 
 	writel_relaxed(PM_PASSWORD | (SECS_TO_WDOG_TICKS(wdog->timeout) &
-				PM_WDOG_TIME_SET), wdt->base + PM_WDOG);
-	cur = readl_relaxed(wdt->base + PM_RSTC);
+				PM_WDOG_TIME_SET), pm->base + PM_WDOG);
+	cur = readl_relaxed(pm->base + PM_RSTC);
 	writel_relaxed(PM_PASSWORD | (cur & PM_RSTC_WRCFG_CLR) |
-		  PM_RSTC_WRCFG_FULL_RESET, wdt->base + PM_RSTC);
+		  PM_RSTC_WRCFG_FULL_RESET, pm->base + PM_RSTC);
 
-	spin_unlock_irqrestore(&wdt->lock, flags);
+	spin_unlock_irqrestore(&pm->lock, flags);
 
 	return 0;
 }
 
 static int bcm2835_wdt_stop(struct watchdog_device *wdog)
 {
-	struct bcm2835_wdt *wdt = watchdog_get_drvdata(wdog);
+	struct bcm2835_pm *pm = watchdog_get_drvdata(wdog);
 
-	writel_relaxed(PM_PASSWORD | PM_RSTC_RESET, wdt->base + PM_RSTC);
+	writel_relaxed(PM_PASSWORD | PM_RSTC_RESET, pm->base + PM_RSTC);
 	return 0;
 }
 
 static unsigned int bcm2835_wdt_get_timeleft(struct watchdog_device *wdog)
 {
-	struct bcm2835_wdt *wdt = watchdog_get_drvdata(wdog);
+	struct bcm2835_pm *pm = watchdog_get_drvdata(wdog);
 
-	uint32_t ret = readl_relaxed(wdt->base + PM_WDOG);
+	uint32_t ret = readl_relaxed(pm->base + PM_WDOG);
 	return WDOG_TICKS_TO_SECS(ret & PM_WDOG_TIME_SET);
 }
 
-static void __bcm2835_restart(struct bcm2835_wdt *wdt)
+static void __bcm2835_restart(struct bcm2835_pm *pm)
 {
 	u32 val;
 
 	/* use a timeout of 10 ticks (~150us) */
-	writel_relaxed(10 | PM_PASSWORD, wdt->base + PM_WDOG);
-	val = readl_relaxed(wdt->base + PM_RSTC);
+	writel_relaxed(10 | PM_PASSWORD, pm->base + PM_WDOG);
+	val = readl_relaxed(pm->base + PM_RSTC);
 	val &= PM_RSTC_WRCFG_CLR;
 	val |= PM_PASSWORD | PM_RSTC_WRCFG_FULL_RESET;
-	writel_relaxed(val, wdt->base + PM_RSTC);
+	writel_relaxed(val, pm->base + PM_RSTC);
 
 	/* No sleeping, possibly atomic. */
 	mdelay(1);
@@ -112,9 +112,9 @@ static void __bcm2835_restart(struct bcm2835_wdt *wdt)
 static int bcm2835_restart(struct watchdog_device *wdog,
 			   unsigned long action, void *data)
 {
-	struct bcm2835_wdt *wdt = watchdog_get_drvdata(wdog);
+	struct bcm2835_pm *pm = watchdog_get_drvdata(wdog);
 
-	__bcm2835_restart(wdt);
+	__bcm2835_restart(pm);
 
 	return 0;
 }
@@ -151,7 +151,7 @@ static void bcm2835_power_off(void)
 	struct device_node *np =
 		of_find_compatible_node(NULL, NULL, "brcm,bcm2835-pm-wdt");
 	struct platform_device *pdev = of_find_device_by_node(np);
-	struct bcm2835_wdt *wdt = platform_get_drvdata(pdev);
+	struct bcm2835_pm *pm = platform_get_drvdata(pdev);
 	u32 val;
 
 	/*
@@ -159,38 +159,39 @@ static void bcm2835_power_off(void)
 	 * from the normal (full) reset. bootcode.bin will not reboot after a
 	 * hard reset.
 	 */
-	val = readl_relaxed(wdt->base + PM_RSTS);
+	val = readl_relaxed(pm->base + PM_RSTS);
 	val |= PM_PASSWORD | PM_RSTS_RASPBERRYPI_HALT;
-	writel_relaxed(val, wdt->base + PM_RSTS);
+	writel_relaxed(val, pm->base + PM_RSTS);
 
 	/* Continue with normal reset mechanism */
-	__bcm2835_restart(wdt);
+	__bcm2835_restart(pm);
 }
 
-static int bcm2835_wdt_probe(struct platform_device *pdev)
+static int bcm2835_pm_probe(struct platform_device *pdev)
 {
 	struct resource *res;
 	struct device *dev = &pdev->dev;
-	struct bcm2835_wdt *wdt;
+	struct bcm2835_pm *pm;
 	int err;
 
-	wdt = devm_kzalloc(dev, sizeof(struct bcm2835_wdt), GFP_KERNEL);
-	if (!wdt)
+	pm = devm_kzalloc(dev, sizeof(struct bcm2835_pm), GFP_KERNEL);
+	if (!pm)
 		return -ENOMEM;
-	platform_set_drvdata(pdev, wdt);
+	platform_set_drvdata(pdev, pm);
 
-	spin_lock_init(&wdt->lock);
+	spin_lock_init(&pm->lock);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	wdt->base = devm_ioremap_resource(dev, res);
-	if (IS_ERR(wdt->base))
-		return PTR_ERR(wdt->base);
+	pm->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(pm->base))
+		return PTR_ERR(pm->base);
 
-	watchdog_set_drvdata(&bcm2835_wdt_wdd, wdt);
+#if defined(CONFIG_WATCHDOG_CORE)
+	watchdog_set_drvdata(&bcm2835_wdt_wdd, pm);
 	watchdog_init_timeout(&bcm2835_wdt_wdd, heartbeat, dev);
 	watchdog_set_nowayout(&bcm2835_wdt_wdd, nowayout);
 	bcm2835_wdt_wdd.parent = dev;
-	if (bcm2835_wdt_is_running(wdt)) {
+	if (bcm2835_wdt_is_running(pm)) {
 		/*
 		 * The currently active timeout value (set by the
 		 * bootloader) may be different from the module
@@ -210,6 +211,7 @@ static int bcm2835_wdt_probe(struct platform_device *pdev)
 		dev_err(dev, "Failed to register watchdog device");
 		return err;
 	}
+#endif
 
 	if (pm_power_off == NULL)
 		pm_power_off = bcm2835_power_off;
@@ -218,7 +220,7 @@ static int bcm2835_wdt_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int bcm2835_wdt_remove(struct platform_device *pdev)
+static int bcm2835_pm_remove(struct platform_device *pdev)
 {
 	if (pm_power_off == bcm2835_power_off)
 		pm_power_off = NULL;
@@ -226,21 +228,21 @@ static int bcm2835_wdt_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct of_device_id bcm2835_wdt_of_match[] = {
+static const struct of_device_id bcm2835_pm_of_match[] = {
 	{ .compatible = "brcm,bcm2835-pm-wdt", },
 	{},
 };
-MODULE_DEVICE_TABLE(of, bcm2835_wdt_of_match);
+MODULE_DEVICE_TABLE(of, bcm2835_pm_of_match);
 
-static struct platform_driver bcm2835_wdt_driver = {
-	.probe		= bcm2835_wdt_probe,
-	.remove		= bcm2835_wdt_remove,
+static struct platform_driver bcm2835_pm_driver = {
+	.probe		= bcm2835_pm_probe,
+	.remove		= bcm2835_pm_remove,
 	.driver = {
-		.name =		"bcm2835-wdt",
-		.of_match_table = bcm2835_wdt_of_match,
+		.name =		"bcm2835-pm",
+		.of_match_table = bcm2835_pm_of_match,
 	},
 };
-module_platform_driver(bcm2835_wdt_driver);
+module_platform_driver(bcm2835_pm_driver);
 
 module_param(heartbeat, uint, 0);
 MODULE_PARM_DESC(heartbeat, "Initial watchdog heartbeat in seconds");
@@ -250,5 +252,5 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
 				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>");
-MODULE_DESCRIPTION("Driver for Broadcom BCM2835 watchdog timer");
+MODULE_DESCRIPTION("Driver for Broadcom BCM2835 PM/WDT");
 MODULE_LICENSE("GPL");
-- 
2.19.1


  parent reply	other threads:[~2018-11-20 17:20 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-20 17:19 [PATCH 0/8] BCM2835 PM driver Eric Anholt
2018-11-20 17:19 ` [PATCH 1/8] watchdog: bcm2835: Move the driver to the soc/ directory Eric Anholt
2018-11-20 17:29   ` Guenter Roeck
2018-11-20 17:19 ` Eric Anholt [this message]
2018-11-20 17:19 ` [PATCH 3/8] soc: bcm: bcm2835-pm: Stop using _relaxed mmio accessors Eric Anholt
2018-11-20 17:19 ` [PATCH 4/8] soc: bcm: bcm2835-pm: Make some little accessor macros for the mmio area Eric Anholt
2018-11-20 17:19 ` [PATCH 5/8] dt-bindings: soc: Add a new binding for the BCM2835 PM node Eric Anholt
2018-11-20 17:19 ` [PATCH 6/8] soc: bcm: bcm2835-pm: Add support for power domains under a new binding Eric Anholt
2018-11-20 17:19 ` [PATCH 7/8] ARM: bcm283x: Extend the WDT DT node out to cover the whole PM block Eric Anholt
2018-11-20 17:20 ` [PATCH 8/8] ARM: bcm283x: Switch V3D over to using the PM driver instead of firmware Eric Anholt
2018-11-20 17:49 ` [PATCH 0/8] BCM2835 PM driver Stefan Wahren
2018-11-20 21:34   ` Eric Anholt
2018-11-20 21:39     ` Arnd Bergmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181120172000.15102-3-eric@anholt.net \
    --to=eric@anholt.net \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=f.fainelli@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=stefan.wahren@i2se.com \
    --cc=wim@linux-watchdog.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®