From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: alsa-devel@alsa-project.org, tiwai@suse.de, broonie@kernel.org,
vkoul@kernel.org, liam.r.girdwood@linux.intel.com, arnd@arndb.de,
linux-kernel@vger.kernel.org
Subject: Re: [RFC PATCH 6/6] ALSA: hda: add fallback capabilities for SKL+ platforms
Date: Wed, 21 Nov 2018 16:39:39 +0200 [thread overview]
Message-ID: <20181121143939.GQ10650@smile.fi.intel.com> (raw)
In-Reply-To: <20181120213644.19103-7-pierre-louis.bossart@linux.intel.com>
On Tue, Nov 20, 2018 at 03:36:44PM -0600, Pierre-Louis Bossart wrote:
> Enable fallback for select PCI IDs
>
> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
> ---
> sound/pci/hda/Kconfig | 40 +++++++++++++++++++++++++++++++++++++++
> sound/pci/hda/hda_intel.c | 19 +++++++++++++------
> sound/soc/intel/Kconfig | 6 ++++++
> 3 files changed, 59 insertions(+), 6 deletions(-)
>
> diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig
> index 4235907b7858..9bb317fb3507 100644
> --- a/sound/pci/hda/Kconfig
> +++ b/sound/pci/hda/Kconfig
> @@ -228,4 +228,44 @@ config SND_HDA_POWER_SAVE_DEFAULT
>
> endif
>
> +if SND_HDA_INTEL
> +
> +config SND_HDA_INTEL_LEGACY_FALLBACK_SKL
> + bool
> + help
> + This option enables HD-audio legacy fallback for
> + Skylake machines
> +
> +config SND_HDA_INTEL_LEGACY_FALLBACK_APL
> + bool
> + help
> + This option enables HD-audio legacy fallback for
> + Broxton/ApolloLake machines
> +
> +config SND_HDA_INTEL_LEGACY_FALLBACK_KBL
> + bool
> + help
> + This option enables HD-audio legacy fallback for
> + KabyLake machines
> +
> +config SND_HDA_INTEL_LEGACY_FALLBACK_GLK
> + bool
> + help
> + This option enables HD-audio legacy fallback for
> + GeminiLake machines
> +
> +config SND_HDA_INTEL_LEGACY_FALLBACK_CNL
> + bool
> + help
> + This option enables HD-audio legacy fallback for
> + CannonLake machines
> +
> +config SND_HDA_INTEL_LEGACY_FALLBACK_CFL
> + bool
> + help
> + This option enables HD-audio legacy fallback for
> + CoffeeLake machines
> +
> +endif ## SND_HDA_INTEL
> +
> endmenu
> diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
> index eb00e37c1c27..569419242da3 100644
> --- a/sound/pci/hda/hda_intel.c
> +++ b/sound/pci/hda/hda_intel.c
> @@ -360,6 +360,7 @@ enum {
> AZX_DCAPS_NO_64BIT |\
> AZX_DCAPS_4K_BDLE_BOUNDARY | AZX_DCAPS_SNOOP_OFF)
>
> +#define AZX_DCAPS_INTEL_LEGACY_FALLBACK(conf) (IS_ENABLED(conf) ? AZX_DCAPS_INTEL_SHARED : 0)
> /*
> * vga_switcheroo support
> */
> @@ -2416,34 +2417,40 @@ static const struct pci_device_id azx_ids[] = {
> .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE },
> /* Sunrise Point-LP */
> { PCI_DEVICE(0x8086, 0x9d70),
> - .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE },
> + .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE |
> + AZX_DCAPS_INTEL_LEGACY_FALLBACK(CONFIG_SND_HDA_INTEL_LEGACY_FALLBACK_SKL) },
Preprocessor may concatenate the same prefix for you.
I expect to see something like ..._FALLBACK(SKL) and so on.
Moreover, you can go further and create a macro that would consolidate all bits together.
> /* Kabylake */
> { PCI_DEVICE(0x8086, 0xa171),
> .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE },
> /* Kabylake-LP */
> { PCI_DEVICE(0x8086, 0x9d71),
> - .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE },
> + .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE |
> + AZX_DCAPS_INTEL_LEGACY_FALLBACK(CONFIG_SND_HDA_INTEL_LEGACY_FALLBACK_KBL) },
> /* Kabylake-H */
> { PCI_DEVICE(0x8086, 0xa2f0),
> .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE },
> /* Coffelake */
> { PCI_DEVICE(0x8086, 0xa348),
> - .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE},
> + .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE |
> + AZX_DCAPS_INTEL_LEGACY_FALLBACK(CONFIG_SND_HDA_INTEL_LEGACY_FALLBACK_CFL) },
> /* Cannonlake */
> { PCI_DEVICE(0x8086, 0x9dc8),
> - .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE},
> + .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE |
> + AZX_DCAPS_INTEL_LEGACY_FALLBACK(CONFIG_SND_HDA_INTEL_LEGACY_FALLBACK_CNL) },
> /* Icelake */
> { PCI_DEVICE(0x8086, 0x34c8),
> .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_SKYLAKE},
> /* Broxton-P(Apollolake) */
> { PCI_DEVICE(0x8086, 0x5a98),
> - .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_BROXTON },
> + .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_BROXTON |
> + AZX_DCAPS_INTEL_LEGACY_FALLBACK(CONFIG_SND_HDA_INTEL_LEGACY_FALLBACK_APL) },
> /* Broxton-T */
> { PCI_DEVICE(0x8086, 0x1a98),
> .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_BROXTON },
> /* Gemini-Lake */
> { PCI_DEVICE(0x8086, 0x3198),
> - .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_BROXTON },
> + .driver_data = AZX_DRIVER_SKL | AZX_DCAPS_INTEL_BROXTON |
> + AZX_DCAPS_INTEL_LEGACY_FALLBACK(CONFIG_SND_HDA_INTEL_LEGACY_FALLBACK_GLK) },
> /* Haswell */
> { PCI_DEVICE(0x8086, 0x0a0c),
> .driver_data = AZX_DRIVER_HDMI | AZX_DCAPS_INTEL_HASWELL },
> diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig
> index c02d08d31d0d..4c6abdbb0b90 100644
> --- a/sound/soc/intel/Kconfig
> +++ b/sound/soc/intel/Kconfig
> @@ -197,6 +197,12 @@ config SND_SOC_INTEL_SKYLAKE_COMMON
> config SND_SOC_INTEL_SKL_LEGACY_SUPPORT
> bool "Fallback legacy HD-audio binding"
> depends on SND_HDA_INTEL=y || SND_SOC_INTEL_SKYLAKE_FAMILY=SND_HDA_INTEL
> + select SND_HDA_INTEL_LEGACY_FALLBACK_SKL if SND_SOC_INTEL_SKL
> + select SND_HDA_INTEL_LEGACY_FALLBACK_APL if SND_SOC_INTEL_APL
> + select SND_HDA_INTEL_LEGACY_FALLBACK_KBL if SND_SOC_INTEL_KBL
> + select SND_HDA_INTEL_LEGACY_FALLBACK_GLK if SND_SOC_INTEL_GLK
> + select SND_HDA_INTEL_LEGACY_FALLBACK_CNL if SND_SOC_INTEL_CNL
> + select SND_HDA_INTEL_LEGACY_FALLBACK_CFL if SND_SOC_INTEL_CFL
> help
> Fallback binding with the legacy HD-audio driver when no DSP is
> found
> --
> 2.17.1
>
--
With Best Regards,
Andy Shevchenko
next prev parent reply other threads:[~2018-11-21 14:39 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-20 21:36 [RFC PATCH 0/6] ASoC:Intel:Skylake: Enable HDaudio legacy fallback Pierre-Louis Bossart
2018-11-20 21:36 ` [RFC PATCH 1/6] ASoC: Intel: Skylake: Add CFL-S support Pierre-Louis Bossart
2018-11-21 14:27 ` Andy Shevchenko
2018-11-21 17:16 ` Pierre-Louis Bossart
2018-11-21 17:38 ` Andy Shevchenko
2018-11-21 22:17 ` Takashi Iwai
2018-11-22 9:56 ` Andy Shevchenko
2018-11-24 3:16 ` [alsa-devel] " Pierre-Louis Bossart
2018-11-20 21:36 ` [RFC PATCH 2/6] ASoC: Intel: Skylake: stop init/probe if DSP is not present Pierre-Louis Bossart
2018-11-21 14:29 ` Andy Shevchenko
2018-11-21 16:48 ` Pierre-Louis Bossart
2018-11-21 17:32 ` Andy Shevchenko
2018-11-20 21:36 ` [RFC PATCH 3/6] ASoC: Intel: Skylake: remove useless tests on DSP presence Pierre-Louis Bossart
2018-11-20 21:36 ` [RFC PATCH 4/6] ASoC: Intel: Skylake: Add more platform granularity Pierre-Louis Bossart
2018-11-20 21:36 ` [RFC PATCH 5/6] ALSA: hda: Allow fallback binding with legacy HD-audio for Intel SKL+ Pierre-Louis Bossart
2018-11-20 21:36 ` [RFC PATCH 6/6] ALSA: hda: add fallback capabilities for SKL+ platforms Pierre-Louis Bossart
2018-11-21 14:39 ` Andy Shevchenko [this message]
2018-11-21 22:20 ` Takashi Iwai
2018-11-21 10:32 ` [RFC PATCH 0/6] ASoC:Intel:Skylake: Enable HDaudio legacy fallback Takashi Iwai
2018-11-28 18:09 ` Pierre-Louis Bossart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181121143939.GQ10650@smile.fi.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=arnd@arndb.de \
--cc=broonie@kernel.org \
--cc=liam.r.girdwood@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=tiwai@suse.de \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®