[PATCH v2 0/3] Reset controller support for i.MX8MQ

[Andrey Smirnov <andrew.smirnov@gmail.com>]

Everyone:

This patch contains changes I made in order to add support for i.MX8MQ
to reset-imx7.c in order to enable support of PCIE IP block on i.MX8MQ
SoCs (full tree can be found at [github-v1]).

NOTE: This patch depens on CONFIG_ARCH_IMX8MQ introduced in [imx8mq]

Feedback is welcome!

Thanks,
Andrey Smirnov

Changes since [v1]

 - Series re-written to use a per-variant LUT instead of using a
   single table

- Changed driver to use "imx8mq" insead of "imx8m" to match other
  drivers and CONFIG_ARCH_IMX8MQ

- Updated list of exported i.MX8MQ resets, add missing and remove
  bogus ones (hopefully nothing is missing this time)

[v1] lkml.kernel.org/r/20181117181131.9330-2-andrew.smirnov@gmail.com
[github-v1] https://github.com/ndreys/linux/commits/imx8mq-pcie-v1
[imx8mq] https://www.spinics.net/lists/arm-kernel/msg687293.html

Andrey Smirnov (3):
  reset: imx7: Add plubming to support multiple IP variants
  reset: imx7: Add support for i.MX8MQ IP block variant
  dt-bindings: reset: imx7: Document usage on i.MX8MQ SoCs

 .../bindings/reset/fsl,imx7-src.txt           |   7 +-
 drivers/reset/Kconfig                         |   2 +-
 drivers/reset/reset-imx7.c                    | 166 ++++++++++++++++--
 include/dt-bindings/reset/imx8mq-reset.h      |  64 +++++++
 4 files changed, 220 insertions(+), 19 deletions(-)
 create mode 100644 include/dt-bindings/reset/imx8mq-reset.h

-- 
2.19.1