mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	stable@vger.kernel.org, Pavel Rojtberg <rojtberg@gmail.com>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Sasha Levin <sashal@kernel.org>
Subject: [PATCH 3.18 28/83] Input: xpad - remove needless bulk out URB used for LED setup
Date: Thu, 29 Nov 2018 15:11:46 +0100	[thread overview]
Message-ID: <20181129140139.566608123@linuxfoundation.org> (raw)
In-Reply-To: <20181129140138.002176596@linuxfoundation.org>

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit a306a65f46acb040d208523592a2d34f67d47a61 ]

This code was probably wrong ever since and is redundant with
xpad_send_led_command. Both try to send a similar command to the xbox360
controller. However xpad_send_led_command correctly uses the pad_nr instead
of bInterfaceNumber to select the led and re-uses the irq_out URB instead
of creating a new one.

Note that this change only affects the two supported wireless controllers.
Tested using the xbox360 wireless controller (PC).

Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/joystick/xpad.c | 79 +----------------------------------
 1 file changed, 1 insertion(+), 78 deletions(-)

diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index a395980bb816..afa232b415a5 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -330,9 +330,6 @@ struct usb_xpad {
 	unsigned char *idata;		/* input data */
 	dma_addr_t idata_dma;
 
-	struct urb *bulk_out;
-	unsigned char *bdata;
-
 	struct urb *irq_out;		/* urb for interrupt out report */
 	unsigned char *odata;		/* output data */
 	dma_addr_t odata_dma;
@@ -512,7 +509,6 @@ static void xpad360w_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned cha
 	if (data[0] & 0x08) {
 		if (data[1] & 0x80) {
 			xpad->pad_present = 1;
-			usb_submit_urb(xpad->bulk_out, GFP_ATOMIC);
 			/*
 			 * Light up the segment corresponding to
 			 * controller number.
@@ -674,28 +670,6 @@ exit:
 			__func__, retval);
 }
 
-static void xpad_bulk_out(struct urb *urb)
-{
-	struct usb_xpad *xpad = urb->context;
-	struct device *dev = &xpad->intf->dev;
-
-	switch (urb->status) {
-	case 0:
-		/* success */
-		break;
-	case -ECONNRESET:
-	case -ENOENT:
-	case -ESHUTDOWN:
-		/* this urb is terminated, clean up */
-		dev_dbg(dev, "%s - urb shutting down with status: %d\n",
-			__func__, urb->status);
-		break;
-	default:
-		dev_dbg(dev, "%s - nonzero urb status received: %d\n",
-			__func__, urb->status);
-	}
-}
-
 static void xpad_irq_out(struct urb *urb)
 {
 	struct usb_xpad *xpad = urb->context;
@@ -1234,52 +1208,6 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 	usb_set_intfdata(intf, xpad);
 
 	if (xpad->xtype == XTYPE_XBOX360W) {
-		/*
-		 * Setup the message to set the LEDs on the
-		 * controller when it shows up
-		 */
-		xpad->bulk_out = usb_alloc_urb(0, GFP_KERNEL);
-		if (!xpad->bulk_out) {
-			error = -ENOMEM;
-			goto fail7;
-		}
-
-		xpad->bdata = kzalloc(XPAD_PKT_LEN, GFP_KERNEL);
-		if (!xpad->bdata) {
-			error = -ENOMEM;
-			goto fail8;
-		}
-
-		xpad->bdata[2] = 0x08;
-		switch (intf->cur_altsetting->desc.bInterfaceNumber) {
-		case 0:
-			xpad->bdata[3] = 0x42;
-			break;
-		case 2:
-			xpad->bdata[3] = 0x43;
-			break;
-		case 4:
-			xpad->bdata[3] = 0x44;
-			break;
-		case 6:
-			xpad->bdata[3] = 0x45;
-		}
-
-		ep_irq_in = &intf->cur_altsetting->endpoint[1].desc;
-		if (usb_endpoint_is_bulk_out(ep_irq_in)) {
-			usb_fill_bulk_urb(xpad->bulk_out, udev,
-					  usb_sndbulkpipe(udev,
-							  ep_irq_in->bEndpointAddress),
-					  xpad->bdata, XPAD_PKT_LEN,
-					  xpad_bulk_out, xpad);
-		} else {
-			usb_fill_int_urb(xpad->bulk_out, udev,
-					 usb_sndintpipe(udev,
-							ep_irq_in->bEndpointAddress),
-					 xpad->bdata, XPAD_PKT_LEN,
-					 xpad_bulk_out, xpad, 0);
-		}
-
 		/*
 		 * Submit the int URB immediately rather than waiting for open
 		 * because we get status messages from the device whether
@@ -1290,13 +1218,11 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 		xpad->irq_in->dev = xpad->udev;
 		error = usb_submit_urb(xpad->irq_in, GFP_KERNEL);
 		if (error)
-			goto fail9;
+			goto fail7;
 	}
 
 	return 0;
 
- fail9:	kfree(xpad->bdata);
- fail8:	usb_free_urb(xpad->bulk_out);
  fail7:	input_unregister_device(input_dev);
 	input_dev = NULL;
  fail6:	xpad_led_disconnect(xpad);
@@ -1320,8 +1246,6 @@ static void xpad_disconnect(struct usb_interface *intf)
 	xpad_deinit_output(xpad);
 
 	if (xpad->xtype == XTYPE_XBOX360W) {
-		usb_kill_urb(xpad->bulk_out);
-		usb_free_urb(xpad->bulk_out);
 		usb_kill_urb(xpad->irq_in);
 	}
 
@@ -1329,7 +1253,6 @@ static void xpad_disconnect(struct usb_interface *intf)
 	usb_free_coherent(xpad->udev, XPAD_PKT_LEN,
 			xpad->idata, xpad->idata_dma);
 
-	kfree(xpad->bdata);
 	kfree(xpad);
 
 	usb_set_intfdata(intf, NULL);
-- 
2.17.1




  parent reply	other threads:[~2018-11-29 14:14 UTC|newest]

Thread overview: 97+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-29 14:11 [PATCH 3.18 00/83] 3.18.128-stable review Greg Kroah-Hartman
2018-11-29 14:11 ` [PATCH 3.18 01/83] usb: core: Fix hub port connection events lost Greg Kroah-Hartman
2018-11-29 14:11 ` [PATCH 3.18 02/83] v9fs_dir_readdir: fix double-free on p9stat_read error Greg Kroah-Hartman
2018-11-29 14:11 ` [PATCH 3.18 03/83] bfs: add sanity check at bfs_fill_super() Greg Kroah-Hartman
2018-11-29 14:11 ` [PATCH 3.18 04/83] sctp: clear the transport of some out_chunk_list chunks in sctp_assoc_rm_peer Greg Kroah-Hartman
2018-11-29 14:11 ` [PATCH 3.18 05/83] gfs2: Dont leave s_fs_info pointing to freed memory in init_sbd Greg Kroah-Hartman
2018-11-29 14:11 ` [PATCH 3.18 06/83] llc: do not use sk_eat_skb() Greg Kroah-Hartman
2018-11-29 14:11 ` [PATCH 3.18 07/83] drm/ast: fixed cursor may disappear sometimes Greg Kroah-Hartman
2018-11-29 14:11 ` [PATCH 3.18 08/83] drm/ast: change resolution may cause screen blurred Greg Kroah-Hartman
2018-11-29 14:11 ` [PATCH 3.18 09/83] can: dev: can_get_echo_skb(): factor out non sending code to __can_get_echo_skb() Greg Kroah-Hartman
2018-11-29 14:11 ` [PATCH 3.18 10/83] can: dev: __can_get_echo_skb(): replace struct can_frame by canfd_frame to access frame length Greg Kroah-Hartman
2018-11-29 14:11 ` [PATCH 3.18 11/83] can: dev: __can_get_echo_skb(): Dont crash the kernel if can_priv::echo_skb is accessed out of bounds Greg Kroah-Hartman
2018-11-29 14:11 ` [PATCH 3.18 12/83] can: dev: __can_get_echo_skb(): print error message, if trying to echo non existing skb Greg Kroah-Hartman
2018-11-29 14:11 ` [PATCH 3.18 13/83] cpufreq: imx6q: add return value check for voltage scale Greg Kroah-Hartman
2018-11-29 14:11 ` [PATCH 3.18 14/83] ARM: make lookup_processor_type() non-__init Greg Kroah-Hartman
2018-11-29 14:28   ` Russell King - ARM Linux
2018-11-30 15:15     ` Greg Kroah-Hartman
2018-11-30 15:18       ` Greg Kroah-Hartman
2018-11-30 19:02         ` Russell King - ARM Linux
2018-12-02 15:17         ` Sasha Levin
2018-12-02 16:15           ` Greg Kroah-Hartman
2018-12-02 16:25             ` Sasha Levin
2018-12-02 20:11               ` Greg Kroah-Hartman
2018-12-02 20:32                 ` Sasha Levin
2018-11-29 14:11 ` [PATCH 3.18 15/83] SUNRPC: Fix a bogus get/put in generic_key_to_expire() Greg Kroah-Hartman
2018-11-29 14:11 ` [PATCH 3.18 16/83] kdb: Use strscpy with destination buffer size Greg Kroah-Hartman
2018-11-29 14:11 ` [PATCH 3.18 17/83] powerpc/numa: Suppress "VPHN is not supported" messages Greg Kroah-Hartman
2018-11-29 14:11 ` [PATCH 3.18 18/83] tmpfs: make lseek(SEEK_DATA/SEK_HOLE) return ENXIO with a negative offset Greg Kroah-Hartman
2018-11-29 14:11 ` [PATCH 3.18 19/83] arm64: remove no-op -p linker flag Greg Kroah-Hartman
2018-11-29 14:11 ` [PATCH 3.18 20/83] Input: initialize device counter variables with -1 Greg Kroah-Hartman
2018-11-29 14:11 ` [PATCH 3.18 21/83] Input: xpad - add rumble support for Xbox One controller Greg Kroah-Hartman
2018-11-29 14:11 ` [PATCH 3.18 22/83] Input: xpad - set the LEDs properly on XBox Wireless controllers Greg Kroah-Hartman
2018-11-29 14:11 ` [PATCH 3.18 23/83] Input: xpad - re-send LED command on present event Greg Kroah-Hartman
2018-11-29 14:11 ` [PATCH 3.18 24/83] Input: xpad - add Covert Forces edition of the Xbox One controller Greg Kroah-Hartman
2018-11-29 14:11 ` [PATCH 3.18 25/83] Input: xpad - fix Razer Atrox Arcade Stick button mapping Greg Kroah-Hartman
2018-11-29 14:11 ` [PATCH 3.18 26/83] Input: xpad - clarify LED enumeration Greg Kroah-Hartman
2018-11-29 14:11 ` [PATCH 3.18 27/83] Input: xpad - use ida() for finding the pad_nr Greg Kroah-Hartman
2018-11-29 14:11 ` Greg Kroah-Hartman [this message]
2018-11-29 14:11 ` [PATCH 3.18 29/83] Input: xpad - factor out URB submission in xpad_play_effect Greg Kroah-Hartman
2018-11-29 14:11 ` [PATCH 3.18 30/83] Input: xpad - x360w: report dpad as buttons and axes Greg Kroah-Hartman
2018-11-29 14:11 ` [PATCH 3.18 31/83] Input: xpad - move the input device creation to a new function Greg Kroah-Hartman
2018-11-29 14:11 ` [PATCH 3.18 32/83] Input: xpad - query wireless controller state at init Greg Kroah-Hartman
2018-11-29 14:11 ` [PATCH 3.18 33/83] Input: xpad - fix clash of presence handling with LED setting Greg Kroah-Hartman
2018-11-29 14:11 ` [PATCH 3.18 34/83] Input: xpad - remove spurious events of wireless xpad 360 controller Greg Kroah-Hartman
2018-11-29 14:11 ` [PATCH 3.18 35/83] Input: xpad - handle "present" and "gone" correctly Greg Kroah-Hartman
2018-11-29 14:11 ` [PATCH 3.18 36/83] Input: xpad - correctly handle concurrent LED and FF requests Greg Kroah-Hartman
2018-11-29 14:11 ` [PATCH 3.18 37/83] Input: xpad - update Xbox One Force Feedback Support Greg Kroah-Hartman
2018-11-29 14:11 ` [PATCH 3.18 38/83] Input: xpad - workaround dead irq_out after suspend/ resume Greg Kroah-Hartman
2018-11-29 14:11 ` [PATCH 3.18 39/83] Input: xpad - use LED API when identifying wireless controllers Greg Kroah-Hartman
2018-11-29 14:11 ` [PATCH 3.18 40/83] Input: xpad - correct xbox one pad device name Greg Kroah-Hartman
2018-11-29 14:11 ` [PATCH 3.18 41/83] Input: xpad - remove unused function Greg Kroah-Hartman
2018-11-29 14:12 ` [PATCH 3.18 42/83] Input: xpad - add Mad Catz FightStick TE 2 VID/PID Greg Kroah-Hartman
2018-11-29 14:12 ` [PATCH 3.18 43/83] Input: xpad - move pending clear to the correct location Greg Kroah-Hartman
2018-11-29 14:12 ` [PATCH 3.18 44/83] Input: xpad - prevent spurious input from wired Xbox 360 controllers Greg Kroah-Hartman
2018-11-29 14:12 ` [PATCH 3.18 45/83] Input: xpad - add more third-party controllers Greg Kroah-Hartman
2018-11-29 14:12 ` [PATCH 3.18 46/83] Input: xpad - xbox one elite controller support Greg Kroah-Hartman
2018-11-29 14:12 ` [PATCH 3.18 47/83] Input: xpad - fix rumble on Xbox One controllers with 2015 firmware Greg Kroah-Hartman
2018-11-29 14:12 ` [PATCH 3.18 48/83] Input: xpad - fix oops when attaching an unknown Xbox One gamepad Greg Kroah-Hartman
2018-11-29 14:12 ` [PATCH 3.18 49/83] Input: xpad - power off wireless 360 controllers on suspend Greg Kroah-Hartman
2018-11-29 14:12 ` [PATCH 3.18 50/83] Input: xpad - add product ID for Xbox One S pad Greg Kroah-Hartman
2018-11-29 14:12 ` [PATCH 3.18 51/83] Input: xpad - fix Xbox One rumble stopping after 2.5 secs Greg Kroah-Hartman
2018-11-29 14:12 ` [PATCH 3.18 52/83] Input: xpad - use correct product id for x360w controllers Greg Kroah-Hartman
2018-11-29 14:12 ` [PATCH 3.18 53/83] Input: xpad - correctly sort vendor ids Greg Kroah-Hartman
2018-11-29 14:12 ` [PATCH 3.18 54/83] Input: xpad - move reporting xbox one home button to common function Greg Kroah-Hartman
2018-11-29 14:12 ` [PATCH 3.18 55/83] Input: xpad - simplify error condition in init_output Greg Kroah-Hartman
2018-11-29 14:12 ` [PATCH 3.18 56/83] Input: xpad - dont depend on endpoint order Greg Kroah-Hartman
2018-11-29 14:12 ` [PATCH 3.18 57/83] Input: xpad - fix stuck mode button on Xbox One S pad Greg Kroah-Hartman
2018-11-29 14:12 ` [PATCH 3.18 58/83] Input: xpad - restore LED state after device resume Greg Kroah-Hartman
2018-11-29 14:12 ` [PATCH 3.18 59/83] Input: xpad - support some quirky Xbox One pads Greg Kroah-Hartman
2018-11-29 14:12 ` [PATCH 3.18 60/83] Input: xpad - sort supported devices by USB ID Greg Kroah-Hartman
2018-11-29 14:12 ` [PATCH 3.18 61/83] Input: xpad - sync supported devices with xboxdrv Greg Kroah-Hartman
2018-11-29 14:12 ` [PATCH 3.18 62/83] Input: xpad - add USB IDs for Mad Catz Brawlstick and Razer Sabertooth Greg Kroah-Hartman
2018-11-29 14:12 ` [PATCH 3.18 63/83] Input: xpad - sync supported devices with 360Controller Greg Kroah-Hartman
2018-11-29 14:12 ` [PATCH 3.18 64/83] Input: xpad - sync supported devices with XBCD Greg Kroah-Hartman
2018-11-29 14:12 ` [PATCH 3.18 65/83] Input: xpad - constify usb_device_id Greg Kroah-Hartman
2018-11-29 14:12 ` [PATCH 3.18 66/83] Input: xpad - fix PowerA init quirk for some gamepad models Greg Kroah-Hartman
2018-11-29 14:12 ` [PATCH 3.18 67/83] Input: xpad - validate USB endpoint type during probe Greg Kroah-Hartman
2018-11-29 14:12 ` [PATCH 3.18 68/83] Input: xpad - add support for PDP Xbox One controllers Greg Kroah-Hartman
2018-11-29 14:12 ` [PATCH 3.18 69/83] Input: xpad - add PDP device id 0x02a4 Greg Kroah-Hartman
2018-11-29 14:12 ` [PATCH 3.18 70/83] Input: xpad - fix some coding style issues Greg Kroah-Hartman
2018-11-29 14:12 ` [PATCH 3.18 71/83] Input: xpad - avoid using __set_bit() for capabilities Greg Kroah-Hartman
2018-11-29 14:12 ` [PATCH 3.18 72/83] Input: xpad - add GPD Win 2 Controller USB IDs Greg Kroah-Hartman
2018-11-29 14:12 ` [PATCH 3.18 73/83] Input: xpad - fix GPD Win 2 controller name Greg Kroah-Hartman
2018-11-29 14:12 ` [PATCH 3.18 74/83] Input: xpad - add support for Xbox1 PDP Camo series gamepad Greg Kroah-Hartman
2018-11-29 14:12 ` [PATCH 3.18 75/83] cw1200: Dont leak memory if krealloc failes Greg Kroah-Hartman
2018-11-29 14:12 ` [PATCH 3.18 76/83] scsi: ufs: fix bugs related to null pointer access and array size Greg Kroah-Hartman
2018-11-29 14:12 ` [PATCH 3.18 77/83] scsi: ufshcd: Fix race between clk scaling and ungate work Greg Kroah-Hartman
2018-11-29 14:12 ` [PATCH 3.18 78/83] scsi: ufs: fix race between clock gating and devfreq scaling work Greg Kroah-Hartman
2018-11-29 14:12 ` [PATCH 3.18 79/83] scsi: qla2xxx: do not queue commands when unloading Greg Kroah-Hartman
2018-11-29 14:12 ` [PATCH 3.18 80/83] tty: wipe buffer Greg Kroah-Hartman
2018-11-29 14:12 ` [PATCH 3.18 81/83] tty: wipe buffer if not echoing data Greg Kroah-Hartman
2018-11-29 14:12 ` [PATCH 3.18 82/83] af_unix: move unix_mknod() out of bindlock Greg Kroah-Hartman
2018-11-29 14:12 ` [PATCH 3.18 83/83] drm/ast: Remove existing framebuffers before loading driver Greg Kroah-Hartman
2018-11-29 19:51 ` [PATCH 3.18 00/83] 3.18.128-stable review kernelci.org bot
2018-11-29 20:25 ` shuah
2018-11-29 21:49 ` Harsh Shandilya
2018-11-30 22:26 ` Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181129140139.566608123@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rojtberg@gmail.com \
    --cc=sashal@kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome