From: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
To: linux-kernel@vger.kernel.org
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>,
Ralf Baechle <ralf@linux-mips.org>,
Paul Burton <paul.burton@mips.com>,
James Hogan <jhogan@kernel.org>, Joshua Kinard <kumba@gentoo.org>,
linux-mips@linux-mips.org (open list:MIPS)
Subject: [PATCH RFC 01/15] MIPS: replace **** with a hug
Date: Fri, 30 Nov 2018 11:27:10 -0800 [thread overview]
Message-ID: <20181130192737.15053-2-jarkko.sakkinen@linux.intel.com> (raw)
In-Reply-To: <20181130192737.15053-1-jarkko.sakkinen@linux.intel.com>
In order to comply with the CoC, replace **** with a hug.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
---
arch/mips/pci/ops-bridge.c | 24 ++++++++++++------------
arch/mips/sgi-ip22/ip22-setup.c | 2 +-
2 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/arch/mips/pci/ops-bridge.c b/arch/mips/pci/ops-bridge.c
index a1d2c4ae0d1b..c755c4c92fa9 100644
--- a/arch/mips/pci/ops-bridge.c
+++ b/arch/mips/pci/ops-bridge.c
@@ -56,7 +56,7 @@ static int pci_conf0_read_config(struct pci_bus *bus, unsigned int devfn,
return PCIBIOS_DEVICE_NOT_FOUND;
/*
- * IOC3 is fucking fucked beyond belief ... Don't even give the
+ * IOC3 is hugging hugged beyond belief ... Don't even give the
* generic PCI code a chance to look at it for real ...
*/
if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16)))
@@ -76,7 +76,7 @@ static int pci_conf0_read_config(struct pci_bus *bus, unsigned int devfn,
oh_my_gawd:
/*
- * IOC3 is fucking fucked beyond belief ... Don't even give the
+ * IOC3 is hugging hugged beyond belief ... Don't even give the
* generic PCI code a chance to look at the wrong register.
*/
if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) {
@@ -85,7 +85,7 @@ static int pci_conf0_read_config(struct pci_bus *bus, unsigned int devfn,
}
/*
- * IOC3 is fucking fucked beyond belief ... Don't try to access
+ * IOC3 is hugging hugged beyond belief ... Don't try to access
* anything but 32-bit words ...
*/
addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2];
@@ -118,7 +118,7 @@ static int pci_conf1_read_config(struct pci_bus *bus, unsigned int devfn,
return PCIBIOS_DEVICE_NOT_FOUND;
/*
- * IOC3 is fucking fucked beyond belief ... Don't even give the
+ * IOC3 is hugging hugged beyond belief ... Don't even give the
* generic PCI code a chance to look at it for real ...
*/
if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16)))
@@ -139,7 +139,7 @@ static int pci_conf1_read_config(struct pci_bus *bus, unsigned int devfn,
oh_my_gawd:
/*
- * IOC3 is fucking fucked beyond belief ... Don't even give the
+ * IOC3 is hugging hugged beyond belief ... Don't even give the
* generic PCI code a chance to look at the wrong register.
*/
if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) {
@@ -148,7 +148,7 @@ static int pci_conf1_read_config(struct pci_bus *bus, unsigned int devfn,
}
/*
- * IOC3 is fucking fucked beyond belief ... Don't try to access
+ * IOC3 is hugging hugged beyond belief ... Don't try to access
* anything but 32-bit words ...
*/
bridge->b_pci_cfg = (busno << 16) | (slot << 11);
@@ -189,7 +189,7 @@ static int pci_conf0_write_config(struct pci_bus *bus, unsigned int devfn,
return PCIBIOS_DEVICE_NOT_FOUND;
/*
- * IOC3 is fucking fucked beyond belief ... Don't even give the
+ * IOC3 is hugging hugged beyond belief ... Don't even give the
* generic PCI code a chance to look at it for real ...
*/
if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16)))
@@ -213,14 +213,14 @@ static int pci_conf0_write_config(struct pci_bus *bus, unsigned int devfn,
oh_my_gawd:
/*
- * IOC3 is fucking fucked beyond belief ... Don't even give the
+ * IOC3 is hugging hugged beyond belief ... Don't even give the
* generic PCI code a chance to touch the wrong register.
*/
if ((where >= 0x14 && where < 0x40) || (where >= 0x48))
return PCIBIOS_SUCCESSFUL;
/*
- * IOC3 is fucking fucked beyond belief ... Don't try to access
+ * IOC3 is hugging hugged beyond belief ... Don't try to access
* anything but 32-bit words ...
*/
addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2];
@@ -257,7 +257,7 @@ static int pci_conf1_write_config(struct pci_bus *bus, unsigned int devfn,
return PCIBIOS_DEVICE_NOT_FOUND;
/*
- * IOC3 is fucking fucked beyond belief ... Don't even give the
+ * IOC3 is hugging hugged beyond belief ... Don't even give the
* generic PCI code a chance to look at it for real ...
*/
if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16)))
@@ -281,14 +281,14 @@ static int pci_conf1_write_config(struct pci_bus *bus, unsigned int devfn,
oh_my_gawd:
/*
- * IOC3 is fucking fucked beyond belief ... Don't even give the
+ * IOC3 is hugging hugged beyond belief ... Don't even give the
* generic PCI code a chance to touch the wrong register.
*/
if ((where >= 0x14 && where < 0x40) || (where >= 0x48))
return PCIBIOS_SUCCESSFUL;
/*
- * IOC3 is fucking fucked beyond belief ... Don't try to access
+ * IOC3 is hugging hugged beyond belief ... Don't try to access
* anything but 32-bit words ...
*/
addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2];
diff --git a/arch/mips/sgi-ip22/ip22-setup.c b/arch/mips/sgi-ip22/ip22-setup.c
index b69daa02401b..50f04fe491ca 100644
--- a/arch/mips/sgi-ip22/ip22-setup.c
+++ b/arch/mips/sgi-ip22/ip22-setup.c
@@ -36,7 +36,7 @@ void __init plat_mem_setup(void)
board_be_init = ip22_be_init;
/* Init the INDY HPC I/O controller. Need to call this before
- * fucking with the memory controller because it needs to know the
+ * hugging with the memory controller because it needs to know the
* boardID and whether this is a Guiness or a FullHouse machine.
*/
sgihpc_init();
--
2.19.1
next parent reply other threads:[~2018-11-30 19:27 UTC|newest]
Thread overview: 89+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20181130192737.15053-1-jarkko.sakkinen@linux.intel.com>
2018-11-30 19:27 ` Jarkko Sakkinen [this message]
2018-11-30 19:57 ` Jarkko Sakkinen
2018-11-30 21:06 ` Nikolay Borisov
2018-11-30 21:50 ` Jarkko Sakkinen
2018-11-30 22:11 ` Nikolay Borisov
2018-11-30 21:13 ` Al Viro
2018-11-30 21:28 ` Randy Dunlap
2018-12-01 1:52 ` Joshua Kinard
2018-12-01 4:58 ` Mike Galbraith
2018-11-30 19:27 ` [PATCH RFC 02/15] Documentation: " Jarkko Sakkinen
2018-11-30 19:27 ` [PATCH RFC 03/15] drm/nouveau: " Jarkko Sakkinen
2018-11-30 20:13 ` Diego Viola
2018-11-30 21:26 ` Jarkko Sakkinen
2018-11-30 22:03 ` Diego Viola
2018-11-30 19:27 ` [PATCH RFC 04/15] m68k: " Jarkko Sakkinen
2018-11-30 19:44 ` John Paul Adrian Glaubitz
2018-11-30 20:59 ` Jarkko Sakkinen
2018-11-30 21:59 ` Jiri Kosina
2018-11-30 19:27 ` [PATCH RFC 05/15] parisc: " Jarkko Sakkinen
2018-11-30 22:48 ` Dennis Clarke
2018-11-30 23:03 ` Jarkko Sakkinen
2018-11-30 23:05 ` Diego Viola
2018-11-30 19:27 ` [PATCH RFC 06/15] cpufreq: " Jarkko Sakkinen
2018-12-03 9:08 ` Rafael J. Wysocki
2018-11-30 19:27 ` [PATCH RFC 07/15] ide: " Jarkko Sakkinen
2018-11-30 19:27 ` [PATCH RFC 08/15] media: " Jarkko Sakkinen
2018-12-01 8:01 ` Tomasz Figa
2018-11-30 19:27 ` [PATCH RFC 09/15] mtd: " Jarkko Sakkinen
2018-11-30 19:39 ` Boris Brezillon
2018-11-30 20:56 ` Jarkko Sakkinen
2018-12-01 10:31 ` Richard Weinberger
2018-11-30 19:27 ` [PATCH RFC 10/15] net/sunhme: " Jarkko Sakkinen
2018-11-30 19:27 ` [PATCH RFC 11/15] scsi: " Jarkko Sakkinen
2018-11-30 20:21 ` James Bottomley
2018-11-30 21:30 ` Jarkko Sakkinen
2018-11-30 19:27 ` [PATCH RFC 12/15] inotify: " Jarkko Sakkinen
2018-12-01 6:40 ` Amir Goldstein
2018-12-05 9:49 ` Jan Kara
2018-11-30 19:27 ` [PATCH RFC 13/15] irq: " Jarkko Sakkinen
2018-11-30 19:27 ` [PATCH RFC 14/15] lib: " Jarkko Sakkinen
2018-11-30 19:41 ` Steven Rostedt
2018-11-30 19:46 ` Jonathan Corbet
2018-11-30 19:49 ` Jiri Kosina
2018-11-30 20:59 ` Jarkko Sakkinen
2018-12-02 3:24 ` Sergey Senozhatsky
2018-12-02 21:34 ` Tobin C. Harding
2018-11-30 19:27 ` [PATCH RFC 15/15] net: " Jarkko Sakkinen
2018-12-03 10:15 ` Phil Sutter
2018-11-30 19:40 ` [PATCH RFC 00/15] Zero ****s, hugload of hugs <3 Kees Cook
2018-11-30 19:48 ` Fwd: " Kees Cook
2018-11-30 20:42 ` Aaro Koskinen
2018-11-30 19:56 ` Davidlohr Bueso
2018-11-30 20:12 ` Jens Axboe
2018-11-30 20:34 ` Michael Schmitz
2018-11-30 20:35 ` David Miller
[not found] ` <2007856.n5V9iKLVsV@eth7>
2018-11-30 20:42 ` David Miller
[not found] ` <2269948.6tYQeUj9R1@eth7>
2018-11-30 20:53 ` Steven Rostedt
2018-11-30 20:43 ` Steven Rostedt
2018-12-01 4:08 ` Jarkko Sakkinen
2018-11-30 21:42 ` Jarkko Sakkinen
2018-11-30 21:47 ` David Miller
2018-11-30 21:53 ` Jens Axboe
2018-11-30 20:34 ` David Miller
2018-11-30 20:55 ` Jarkko Sakkinen
2018-11-30 21:01 ` James Bottomley
2018-11-30 21:44 ` Jarkko Sakkinen
2018-11-30 21:48 ` David Miller
2018-11-30 21:54 ` Jarkko Sakkinen
2018-11-30 22:04 ` James Bottomley
2018-11-30 21:57 ` James Bottomley
2018-11-30 22:12 ` Jarkko Sakkinen
2018-11-30 22:14 ` Jonathan Corbet
2018-11-30 22:26 ` Jarkko Sakkinen
2018-11-30 22:29 ` Jarkko Sakkinen
2018-11-30 22:30 ` James Bottomley
2018-11-30 22:40 ` Jarkko Sakkinen
2018-11-30 23:28 ` Jarkko Sakkinen
2018-12-01 8:20 ` Geert Uytterhoeven
2018-12-07 13:39 ` Eric Curtin
2018-11-30 22:26 ` James Bottomley
2018-11-30 21:02 ` Steven Rostedt
2018-11-30 21:04 ` Jonathan Corbet
2018-11-30 19:57 ` Geert Uytterhoeven
2018-11-30 21:09 ` Jarkko Sakkinen
2018-11-30 20:09 ` John Paul Adrian Glaubitz
2018-11-30 21:32 ` Jarkko Sakkinen
2018-11-30 20:31 ` Matthias Brugger
2018-11-30 21:34 ` Jarkko Sakkinen
2018-11-30 21:07 ` Jarkko Sakkinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181130192737.15053-2-jarkko.sakkinen@linux.intel.com \
--to=jarkko.sakkinen@linux.intel.com \
--cc=jhogan@kernel.org \
--cc=kumba@gentoo.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=paul.burton@mips.com \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®